Jump to content

Everything 800mhz (1xA, LTE, coverage, timeline, etc)


Recommended Posts

No, certainly not. Not big enough. I think those are related to the T-Mobile gear.

 

Alcatel Lucent 800 RRUs look the ones up top here.

scU9PKU.jpg

 

OH i see. Since the 800Mhz port is connected pretty much doesn't mean much. Thanks for the reply.

Link to comment
Share on other sites

I can't figure out what is going on there... why or what it's hooked up to. 

 

Will take more snap shots of different sectors.  it may help solve this mystery.   ;)

Link to comment
Share on other sites

Guest DigiClaws

It only makes sense for Sprint to convert "strategically placed" IDEN towers to NV where there is terrible site spacing or lack of coverage. For instance, the old IDEN tower at the Naval Air Station Joint Reserve Base in NW Fort Worth has been converted to a 3g NV tower. Not sure about any other IDEN towers around the country.

Link to comment
Share on other sites

It only makes sense for Sprint to convert "strategically placed" IDEN towers to NV where there is terrible site spacing or lack of coverage. For instance, the old IDEN tower at the Naval Air Station Joint Reserve Base in NW Fort Worth has been converted to a 3g NV tower. Not sure about any other IDEN towers around the country.

 

There are several that were converted in San Diego and many more nationwide.  I think there will be more sites getting converted to NV or possibly getting TDD-LTE because of Softbank.

Link to comment
Share on other sites

one question that i've been trying to search to get answered is the old iden network now that the softbank and clear mergers are complete is sprint going to repurpose a iden only tower to NV if so do we know how many and where they are 

 

I know of at least one tower in Houston that was converted.

Link to comment
Share on other sites

Picking up 1x800 in Franklin, TN

 

And we are picking up an unnecessarily massive screenshot.

 

;)

 

AJ

  • Like 6
Link to comment
Share on other sites

I can't imagine the voice quality being all that great  :P

 

I've found with some voice loopback tests that on my Note2 the threshold for voice seems to be around -103ish.  Sometimes even if I try to make a call at -102 or worse it will hand off to a closer legacy site. 

Link to comment
Share on other sites

Just ported from USCC to Sprint My Way Plan here in Chicago earlier this week.

 

Selected the Moto X at corporate store.

 

Gave them my house street address where the claimed the data service was 4G LTE.

 

Out on the street in front of my house signal was LTE,

 

Speedtest showed 57 ms latency and 4mb/sec downloads.

 

Walked inoto the house: 1st floor, which is double masonary construction: 1 bar 3G signal,

120 ms latency, download speeds <300 kb/sec.

 

Now I walk upstairs where the construction is frame and voila: 4G signal just like outside the house

 

Now I know that the Moto X is 1900 mHz LTE only.

 

Will the launch of 800 mHz here in Chicago is there any chance the 1900 mHz signal will improve to allow 4G to penetrate the walls of the masonary part of the home?

 

Or am I better off swapping to a dual band device like the I-Phone 5S to catch the 800 mHz signal when it goes live?

 

Thanks to all in advance.

Link to comment
Share on other sites

-snip snip-

 

Here's the Chicago thread where local Chicago folks may help answer your questions.

http://s4gru.com/index.php?/topic/1084-network-visionlte-chicago-market/

 

In summary - no company can guarantee in door coverage as you can see just by how two different building materials can offer such drastic differences in receptions. What can help you though is LTE 800 which has much better propagation characteristics compared to PCS and may provide you with some coverage inside depending on just how badly that masonry affects RF.

 

But yes, LTE 800 would help out substantially as you get EVDO 3G (albeit barely) which should translate to at least half decent LTE 800 coverage at the same spot from the same tower. 

Link to comment
Share on other sites

Here's the Chicago thread where local Chicago folks may help answer your questions.

http://s4gru.com/index.php?/topic/1084-network-visionlte-chicago-market/

 

In summary - no company can guarantee in door coverage as you can see just by how two different building materials can offer such drastic differences in receptions. What can help you though is LTE 800 which has much better propagation characteristics compared to PCS and may provide you with some coverage inside depending on just how badly that masonry affects RF.

 

But yes, LTE 800 would help out substantially as you get EVDO 3G (albeit barely) which should translate to at least half decent LTE 800 coverage at the same spot from the same tower. 

Thanks LiloTimz

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...