Jump to content

Official Magic Box discussion thread


lilotimz

Recommended Posts

Interesting.  I will have to do some experimentation---while everyone else in the house is asleep ;)

(yes--we are data-heavy users as we can only get 3Mbit DSL at our house!  60+/40+/20/10GB average monthly on our 4 phones).

 

Link to comment
Share on other sites

AirUnity 544 Magic Box

No longer responds to my finger. The display is on and displays the time but if I tap the screen it goes to the 3 boxes and from that point it totally ignores any finger taps. Up to this point it was working albeit poorly due to being in a poor signal area.

I unplugged/reboooted twice but to no avail.

Is there anything else I can try to revive the screen touchability?

Else I'll call MB support.

Thanks,

J

Link to comment
Share on other sites

6 hours ago, schmidtj said:

AirUnity 544 Magic Box

No longer responds to my finger. The display is on and displays the time but if I tap the screen it goes to the 3 boxes and from that point it totally ignores any finger taps. Up to this point it was working albeit poorly due to being in a poor signal area.

I unplugged/reboooted twice but to no avail.

Is there anything else I can try to revive the screen touchability?

Else I'll call MB support.

Thanks,

J

Prob call support and request a replacement.

Link to comment
Share on other sites

I've had a ticket open for days. My MagicBox is still holding on to an unusable B41 signal since the firmware upgrade. It's been four days since I opened the ticket and now I just escalated it.  

Link to comment
Share on other sites

So, are we going to talk about the new Wi-Fi toggle on the latest MB firmware update? Haven't seen a single word on it yet...

Is this for current generation Magic Boxes, not the new one that is rumored to be releasing soon? Does it allow for Wi-Fi backhaul? 

 

Jqp8ea3.png

Link to comment
Share on other sites

2 hours ago, rocketr said:

I've had a ticket open for days. My MagicBox is still holding on to an unusable B41 signal since the firmware upgrade. It's been four days since I opened the ticket and now I just escalated it.  

Mine hangs on to a -123dBm B41 signal. Download is okay around 5Mbps, but upload is always basically 0.01Mbps...

If it would latch on to B25, it would be a much better experience. 

Link to comment
Share on other sites

59 minutes ago, mnjeepmale said:

My MB hasn't been working for weeks now. It's stuck at 3/4 line saying 'configuring LTE services'. Power cycled it and no change.
Should I contact MB support?

Sent from my SM-N950U using Tapatalk
 

I would try and take it to a different location and see if it connects there. Friend's house, parents, work, etc. Could be a tower issue.

  • Like 1
Link to comment
Share on other sites

Just received my Magic Box, it's working fine for my iPhone X but my other iPhone 5 running ios10.3.3 doesn't connect to get full LTE service.  There isn't much helpful info out there to try and resolve it myself. I updated the network setting on the iPhone 5 but that didn't help. ANy suggestions? or is it a phone issue?

Link to comment
Share on other sites

34 minutes ago, Heather said:

Just received my Magic Box, it's working fine for my iPhone X but my other iPhone 5 running ios10.3.3 doesn't connect to get full LTE service.  There isn't much helpful info out there to try and resolve it myself. I updated the network setting on the iPhone 5 but that didn't help. ANy suggestions? or is it a phone issue?

Magic Box broadcast's it's service on B41 LTE. iPhone 5 and 5S are not capable of B41, only 25 & 26(iPhone 5S only).

  • Like 7
Link to comment
Share on other sites

Found this interesting app that helps position MB's in best possible location..

https://play.google.com/store/apps/details?id=com.sprint.networktools&rdid=com.sprint.networktools

It is an unreleased app so expect less than perfect performance out of it. But it is coming from Sprint directly which is encouraging. 

  • Like 4
Link to comment
Share on other sites

My MB was recently replaced due to a defective touchscreen. The previous MB had received the recent firmware update but the replacement is still on the previous version. It’s been over a week. Is Sprint still pushing updates or do I need to call support? I’m in Chicagoland. 

Tnx,

J

Link to comment
Share on other sites

3 hours ago, schmidtj said:

My MB was recently replaced due to a defective touchscreen. The previous MB had received the recent firmware update but the replacement is still on the previous version. It’s been over a week. Is Sprint still pushing updates or do I need to call support? I’m in Chicagoland. 

Tnx,

J

If it works, I would be happy and call it good...

Link to comment
Share on other sites

 

On 10/13/2018 at 11:32 AM, mnjeepmale said:

My MB hasn't been working for weeks now. It's stuck at 3/4 line saying 'configuring LTE services'. Power cycled it and no change.
Should I contact MB support?

I had the same issue.  I ended up contacting Sprint on Twitter.  We exchanged a couple of DMs and then Sprint moved to a trouble shooter on the web and finally had a trouble shooter call me.  After some time troubleshooting remotely, they decided to replace the unit.

The replacement unit works well.  See the SCP shots before and after in my home taken with a Galaxy S9..

Additional comments: While the MB is not up against a window as recommended, I can get a MB signal on the public street in front of my home.  Makes my remote garage door opener on my phone more dependable.  Same for my Nest connection on my phone.

I see a difference on both my HTC One M8 and my new Galaxy S9.

HTC One m8 Speedtest in house WiFi verses Magic Box.  Not sure how these numbers compare to the norm around here. A moment later, Sprint beat my WiFi upload at 5.12 MbPs.

 

Screenshot_SignalCheck Pro from home with Magic Box.jpg

Magic Box effect_SignalCheck Pro.jpg

Speedtest MB vs WiFi-Cropped.jpg

  • Like 1
Link to comment
Share on other sites

On 10/19/2018 at 1:09 PM, nexgencpu said:

Found this interesting app that helps position MB's in best possible location..

https://play.google.com/store/apps/details?id=com.sprint.networktools&rdid=com.sprint.networktools

It is an unreleased app so expect less than perfect performance out of it. But it is coming from Sprint directly which is encouraging. 

I tried out the app last night. The issue I'm having is that the Magic Box is connected to a weak Band 41 (-123). While using the app I was only able to get Band 25 on my phone. My speeds before Magic Box were better. I reported fair speeds to Sprint using My Sprint app so how hopefully it improves.

 

It is raining right now so the trees are wet. Normally I get -119 on the Magic Box when it's dry.

  • Like 1
Link to comment
Share on other sites

On 10/7/2018 at 4:58 PM, shaferz said:

Our speeds are not that low, but where we were a consistant 60mbps download, we are now stuck around 15.  Odd.

Welp nevermind on that.  Ran a speed test this morning and now we are back to 55-65mbps download and 5+mbps upload.  :D

  • Like 2
Link to comment
Share on other sites

What I end up doing is moving my Magic Box Downstairs. I don't get as good of a signal downstairs but Band 41 became so weak that the Magic Box went to Band 25. Now I'm getting 40 Mbps down. If I were to give Sprint some advice I would say have the box do a speed test and if the speeds are too slow move to a different Band. Upstairs I get a stronger Band 25 but I can't put it up there because the Magic Box will connect to a very weak Band 41. 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

On 10/26/2018 at 7:49 PM, pokefan02 said:

Is the newest firmware update for Volte markets only or nationwide? 

Probably all markets. VOLTE is not currently active in Nebraska, however I got the firm update.

Edit: Sorry I was wrong.

  • Like 1
Link to comment
Share on other sites

42 minutes ago, Dkoellerwx said:

Are you sure it's not active in Nebraska? It should be live in all of the soft launch markets. 

I don't have an S8, nor do I know anyone that does. However, I thought that T-Mob roaming would need to be active in the market for Sprint to launch VOLTE in it? I could be dead wrong...

Link to comment
Share on other sites

2 minutes ago, though said:

I don't have an S8, nor do I know anyone that does. However, I thought that T-Mob roaming would need to be active in the market for Sprint to launch VOLTE in it? I could be dead wrong...

Nope, T-Mobile roaming has nothing to do with it. You likely won't be able to place a VoLTE call on T-Mobile for the time being even on activated devices. 

Link to comment
Share on other sites

My Magic Box saga continues. Over night the box found that weak Band 41 on it's own and switched to that. This morning I couldn't even browse the web. The connection would just time out. I checked the box and it was on -120 Band 41 downstairs. I'm going to try a different Window because I figure that's what Magic Box support would tell me. These devices should be smarter. I understand wanting to connect to Band 41 because that's where most of Sprint's spectrum is but come on. If service is so poor that a customer can't browse the web then the box should switch to a different Band. I may try a reset if moving Windows doesn't work. 

Link to comment
Share on other sites

1 hour ago, drhz said:

My Magic Box saga continues. Over night the box found that weak Band 41 on it's own and switched to that. This morning I couldn't even browse the web. The connection would just time out. I checked the box and it was on -120 Band 41 downstairs. I'm going to try a different Window because I figure that's what Magic Box support would tell me. These devices should be smarter. I understand wanting to connect to Band 41 because that's where most of Sprint's spectrum is but come on. If service is so poor that a customer can't browse the web then the box should switch to a different Band. I may try a reset if moving Windows doesn't work. 

I found a small spot in my attic that worked well when I had one; newish windows have been harsh on RF. Before I put it in the attic it worked best in the spare room on the floor in a corner. Go figure.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...