Jump to content

Google Nexus 5 by LG Users Thread!


nexgencpu

Recommended Posts

after fast boot part im lost!! I think ill wait to November 3rd when the factory images are released

Do you know what the android SDK is? Most of us use this one because it only includes the essentials. http://www.xda-developers.com/android/lightweight-adb-and-fastboot-installer/

 

You need to go into the folder where the SDK is installed, and make a new one for the lollipop file you've downloaded(should be a .tgz at this point, if it isn't manually change the file type to .tgz) extract the file in the folder and you should get a tar file then you need to extract the .tar file.

 

Now this is the point where your phone needs to be unlocked, when you go to fastboot mode it says unlock state on the screen, if it's locked you're going to need to open up a command prompt window and run the command I gave you above ***This will WIPE your phone of any and all user data*** then once you're unlocked you either can double click the flash-all.bat file to flash the image to your device, or you can run the other command I gave you in a command prompt window.

Link to comment
Share on other sites

Ha, phones clock is an hour behind this morning. Wrong weekend Sprint!

On AT&T we changed from Mountain to Central time this morning. Not even the right direction. LOL

  • Like 1
Link to comment
Share on other sites

That would drive me nuts. Not getting data and then to do a factory reset especially after all the customization. Any idea what caused it?

Not at all, woke up went to work and went to do my normal routine and realized data wasn't working. Tried a prl update and I kept getting a network error. Tried everything I could think of but to no avail. Luckily I didn't lose much, just a few photos.

 

Sent from my Nexus 5

Link to comment
Share on other sites

Not at all, woke up went to work and went to do my normal routine and realized data wasn't working. Tried a prl update and I kept getting a network error. Tried everything I could think of but to no avail. Luckily I didn't lose much, just a few photos.

 

Sent from my Nexus 5

Happened to me a few months ago. Connection showed as unregistered in signalcheck. I tried everything. I ended up factory resetting then restoring a backup. Very confusing. I would've thought it was related to me tweaking stuff, but it happened randomly weeks after I last changed a system file.

Link to comment
Share on other sites

Happened to me a few months ago. Connection showed as unregistered in signalcheck. I tried everything. I ended up factory resetting then restoring a backup. Very confusing. I would've thought it was related to me tweaking stuff, but it happened randomly weeks after I last changed a system file.

That's what was showing for me in signalcheck pro, first time it's ever happened to me.

 

Sent from my Nexus 5

Link to comment
Share on other sites

Happened to me a few months ago. Connection showed as unregistered in signalcheck. I tried everything. I ended up factory resetting then restoring a backup. Very confusing. I would've thought it was related to me tweaking stuff, but it happened randomly weeks after I last changed a system file.

That's what was showing for me in signalcheck pro, first time it's ever happened to me.

 

Weird, a few people have asked me about this lately. "Unregistered" showing in the app typically indicates a device that is not activated on the network. I see it on my deactivated EVO LTE and when I put inactive prepaid SIMs in my Nexus 5. In my experience, you will get network connections, but cannot transfer any data.

 

-Mike

Link to comment
Share on other sites

Weird, a few people have asked me about this lately. "Unregistered" showing in the app typically indicates a device that is not activated on the network. I see it on my deactivated EVO LTE and when I put inactive prepaid SIMs in my Nexus 5. In my experience, you will get network connections, but cannot transfer any data.

 

-Mike

Yeah I don't get it, hoping it's just a bug with this version of lollipop.

 

Sent from my Nexus 5

Link to comment
Share on other sites

Yeah I don't get it, hoping it's just a bug with this version of lollipop.

 

Were you seeing the same results on both 3G and LTE? Did you try re-seating the SIM? I know it doesn't really matter now, but if this a bug it has the potential to be a huge one.. @cordell12 recently contacted me with a similar issue on two Note 3's and a Nexus 5, but it only affected 3G data -- everything else was fine, including LTE. A factory reset somehow did the trick.

 

-Mike

Link to comment
Share on other sites

Were you seeing the same results on both 3G and LTE? Did you try re-seating the SIM? I know it doesn't really matter now, but if this a bug it has the potential to be a huge one.. @cordell12 recently contacted me with a similar issue on two Note 3's and a Nexus 5, but it only affected 3G data -- everything else was fine, including LTE. A factory reset somehow did the trick.

 

-Mike

It did it on either one sadly.

 

Sent from my Nexus 5

Link to comment
Share on other sites

That happened to me, but Sprint was to blame when they some how messed with my Airave and phone. For some reason a day later it was fixed when I tried activating the phone via Wifi.

Link to comment
Share on other sites

Its happened to me a few times. Re provisioning with *#*#72786#*#*, updating profile and then prl has fixed it every time. I'm not sure what causes it, but its really annoying.

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

Its happened to me a few times. Re provisioning with *#*#72786#*#*, updating profile and then prl has fixed it every time. I'm not sure what causes it, but its really annoying.

 

Sent from my Nexus 5 using Tapatalk

Pretty sure I tried that but I could be wrong. :P

Link to comment
Share on other sites

When I first got Lollipop installed I could not get data working for the life of me for hours. Showed up as "Unregistered" in Signalcheck. Eventually some combination of radio info switching and profile updating fixed it, though I could always connect in 1x mode (CDMA Only). Occasionally SCP will show "Unregistered" when I'm connected to Wifi and camping on LTE, especially in fringe coverage areas. 

Link to comment
Share on other sites

I had this same issue when first flashing the new Lollipop image earlier in the month. Unregistered in SCP. PRL update didn't work, neither did reprovisioning. 

 

Did a factory reset and after the initial activation during setup everything worked fine and has since. Weird.

Link to comment
Share on other sites

Anyone get the notification for the official update yet? Sitting here on the final preview not sure I'll get a prompt for the official one. And finally has anyone seen the official images yet? Here's hoping for some more polish.

 

Sent from my Nexus 5

Link to comment
Share on other sites

If your on a preview build than more than likely you will not get a notification for the OTA update. I myself went back to kitkat to wait for the update. Otherwise you'll have to flash your phone again with the official lollipop build once it goes live.

Link to comment
Share on other sites

Anyone get the notification for the official update yet? Sitting here on the final preview not sure I'll get a prompt for the official one. And finally has anyone seen the official images yet? Here's hoping for some more polish.

 

Sent from my Nexus 5

I checked earlier today and it said I have the latest version... I know it was supposed to launch today, so I'm looking forward to it.
Link to comment
Share on other sites

Folks on Android Central were reporting that when they asked Google they were being told "in the coming weeks" they would get the update for N5.

 

Thought Google changed course on that and was saying everyone would get it on 11/3?

Link to comment
Share on other sites

Google said it would be released on the 3rd, but that doesn't necessarily mean all devices. The Nexus 9 has launched with L so I guess that means the rollout has started. Of course that doesn't help us! ????

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...