Jump to content

Everything 800mhz (1xA, LTE, coverage, timeline, etc)


Recommended Posts

Yes, but it was disabled on all of them due to some markets having issues what that phone on 1x800.

Is there any plan on turning it back on? Or is it just disabled permanently. I was thinking of buying the HTC One M7 does that have it?

Link to comment
Share on other sites

How's the nexus 5? Does that have spark and support 800 voice? I live very rural and am on the fringe on 1900 voice it shows 800 voice on the tower 8 miles from me. If I can get a phone with that I am certain I'd have better signal at home.

Link to comment
Share on other sites

How's the nexus 5? Does that have spark and support 800 voice? I live very rural and am on the fringe on 1900 voice it shows 800 voice on the tower 8 miles from me. If I can get a phone with that I am certain I'd have better signal at home.

Then get the Nexus 5. The spark update is ready but pending the rest of the Android update. The Nexus 5 RF capability is far superior to every other device and will help you very much so in the fringe areas. 

  • Like 2
Link to comment
Share on other sites

And the Nexus 5 supports the 1x800?

Every Sprint phone sold in the past 2+ years is capable of connecting to CDMA (1X) 800. The Note 2 is the anomaly; it's capable, but Sprint pushed out that custom PRL to those devices to ignore it. I do not believe any other device has similar problems.

 

-Mike

  • Like 1
Link to comment
Share on other sites

That would be just my luck to switch to sprint a month ago from Verizon and get the only phone that doesn't connect to 800 haha. What other phones would be good for signal in Fringe areas aside from the nexus 5? Is the G2 similar in signal strength?

Link to comment
Share on other sites

That would be just my luck to switch to sprint a month ago from Verizon and get the only phone that doesn't connect to 800 haha. What other phones would be good for signal in Fringe areas aside from the nexus 5? Is the G2 similar in signal strength?

The Nexus is far more superior in RF performance. However, if you're in a good coverage area, you should be fine.

Link to comment
Share on other sites

Looks like 1x800 is finally out of testing mode in the Raleigh/Durham area.  I'm picking it up on SID 22438 instead of the testing SID as of today.  Went back to the stock PRL and am still picking it up.  Need to check my wife's iPhone when she gets home too and see if she's getting it now.  Hopefully my Sprint Phone Connect 2 will have a better signal as well because it's been a bit spotty at times.

 

Maybe some acceptances will show up soon.

  • Like 1
Link to comment
Share on other sites

Looks like 1x800 is finally out of testing mode in the Raleigh/Durham area. I'm picking it up on SID 22438 instead of the testing SID as of today. Went back to the stock PRL and am still picking it up. Need to check my wife's iPhone when she gets home too and see if she's getting it now. Hopefully my Sprint Phone Connect 2 will have a better signal as well because it's been a bit spotty at times.

 

Maybe some acceptances will show up soon.

That's awesome! Maybe they'll do the same here in Charlotte too!

 

-Anthony

  • Like 3
Link to comment
Share on other sites

I'm assuming that when I'm on 3g it will connect to either 1900 x1 or 800 for voice? Or only when it sees the need for the stronger signal, I'll keep a look out for 800 voice since I've seen some 800lte.

 

Sent from my HTC One M8

Link to comment
Share on other sites

We have two hallways in my high school in Harrisburg, NC (just northeast of Charlotte) and I'm usually roaming on Verizon with 4-5 bars of 1x. Just looked at my phone, it said it was on Sprint with a -103 signal of 1x. Checked the engineering screens and it is on 1x800, SID 22438, Band Class 10. Looks like we're starting to have some publicly available 800 Voice in Charlotte!

 

-Anthony

  • Like 2
Link to comment
Share on other sites

So I just purchased the nexus 5 and I live in an area with very poor 1x1900 but wonderful 1x800 but my phone clings on to the weakest 1900 signal with no bars when the 800 kicks in I have 3-4 bars but as soon as I make a call or text it goes right back to the 1900 which is virtually unusable. Is there something I can do to put priority on 800 and 1900 second? Suggestions? Thanks :)

Link to comment
Share on other sites

So I just purchased the nexus 5 and I live in an area with very poor 1x1900 but wonderful 1x800 but my phone clings on to the weakest 1900 signal with no bars when the 800 kicks in I have 3-4 bars but as soon as I make a call or text it goes right back to the 1900 which is virtually unusable. Is there something I can do to put priority on 800 and 1900 second? Suggestions? Thanks :)

Use Digiblur's PRL in the Sponsor section

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

I haven't seen a B26 LTE connection since last week as I posted.  My G2 now behaves like it always has and falls-back to PCS eHRPD when in parts of my basement,

 

I'm now seeing the B26 LTE again this morning here.  I hope it sticks around this time.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...