Jump to content

Everything 800mhz (1xA, LTE, coverage, timeline, etc)


Recommended Posts

Is there a way to update the I5 PRL to search for 800 over 1900? I understand it is set up right now to prefer 1900. Just wondering.

 

 

But but but I can change the PRLs on my iphone easily ;)

If your phone is jailbroken, then yes you can change PRLs. It's not easy but it's not particularly difficult either. See this post earlier in the thread.

 

digiblur maintains links to all current PRLs offsite here.

  • Like 1
Link to comment
Share on other sites

If your phone is jailbroken, then yes you can change PRLs. It's not easy but it's not particularly difficult either. See this post earlier in the thread.

 

digiblur maintains links to all current PRLs offsite here.

 

Ok thanks, I'll take a look at it

Link to comment
Share on other sites

What is required for LTE 800 to be turned on? A Card?

 

That sounds like a word the general public would find acceptable for the actual real base station changes required for 800 Lte to broadcast out of the Sprint NV antenna panels. "A card"

A for Advanced ;)

Link to comment
Share on other sites

Ok I should know this but remind me is the 800 mhz  stuff going live in NV now (not in NV2.0) just for voice calls and 1x data or will it be 3G also?

Link to comment
Share on other sites

Ok I should know this but remind me is the 800 mhz stuff going live in NV now (not in NV2.0) just for voice calls and 1x data or will it be 3G also?

 

Just 800MHz voice and 1x data. There isn't enough spectrum for 800SMR EVDO. NV 2.0 is the rollout of 800LTE.

 

 

Sent from Josh's iPhone 5 using Tapatalk 2

Link to comment
Share on other sites

Ok I should know this but remind me is the 800 mhz  stuff going live in NV now (not in NV2.0) just for voice calls and 1x data or will it be 3G also?

 

Yeah, you should know this.  CDMA1X is 3G, so your question makes no sense.

 

;)

 

AJ

  • Like 3
Link to comment
Share on other sites

Yeah, you should know this.  CDMA1X is 3G, so your question makes no sense.

 

;)

 

AJ

I'm having a bad day. I'm having a mental block, 24 hour brain tumor, or just tired.  I was thinking of the data rate you get when your phone no longer says 3G. I thought that was referred to as 1x. Somewhere around 50-100khz. 

 

Basically I was wondering when 800 lights up will i get better data speeds (not counting LTE on any band) inside some of the places I hang out where the current signal is weak or I will just have more reliable calling in there. I hope its signs of work being done but browsing the net and using Tapatalk is getting unbearably slow lately around work.  The boss loves that.

Link to comment
Share on other sites

That sounds like a word the general public would find acceptable for the actual real base station changes required for 800 Lte to broadcast out of the Sprint NV antenna panels. "A card"

A for Advanced ;)

I thought in order to turn LTE 800 on, you needed some type of component card.

Link to comment
Share on other sites

I thought in order to turn LTE 800 on, you needed some type of component card.

 

Everyone's just being a stickler today.  Some markets, like Samsung markets, this is the case, others will need more work.

Link to comment
Share on other sites

 

 

I thought in order to turn LTE 800 on, you needed some type of component card.

 

 

Everyone's just being a stickler today. Some markets, like Samsung markets, this is the case, others will need more work.

All vendors have dual use certified RRUs.

 

Sent from my little Note2

 

 

Link to comment
Share on other sites

I'm having a bad day. I'm having a mental block, 24 hour brain tumor, or just tired.  I was thinking of the data rate you get when your phone no longer says 3G. I thought that was referred to as 1x. Somewhere around 50-100khz.

CDMA1X and EV-DO are both 3G. So, 3G is not a very descriptive generic term. It could even be referring to W-CDMA.

 

For our purposes, call the Sprint relevant airlinks what they are: CDMA1X, EV-DO, LTE, TD-LTE, and WiMAX.

 

Basically I was wondering when 800 lights up will i get better data speeds (not counting LTE on any band) inside some of the places I hang out where the current signal is weak or I will just have more reliable calling in there. I hope its signs of work being done but browsing the net and using Tapatalk is getting unbearably slow lately around work.  The boss loves that.

If nothing else, you will likely have CDMA1X 800 voice and data (but not simultaneously) inside. CDMA1X 800 data will still be in the 100 kbps range. This is one advantage that Sprint will still lack compared to VZW and AT&T. In most markets, the duopoly has fallback to EV-DO 850 and W-CDMA 850, respectively.

 

AJ

  • Like 3
Link to comment
Share on other sites

Honestly 1x is more usable sometimes than evdo is. I think it has a lot to do with congestion. Once NV is running here, I think things will really start to look nice. I had no problem sending mms on 1x the other night. I can't say the same when my att phone was on edge, edge absolutely crawls.

Link to comment
Share on other sites

In case you guys missed my other post in the PRL thread...the latest round of PRLs  56015, 25015, 51097(iphone5), etc...basically all 800SMR capable devices have new updates as of 6/5/2013. 

 

to make it easier let's just say what's not 800SMR scanned now:

 

Here are the only 4 800SMR SIDs that are NOT in the scans:

 

22429,Sprint Nextel,Boise ID; Brigham City UT; Jackson Hole WY; Salt Lake City UT; St. George UT
22433,Sprint Nextel,Pendleton OR; Sandpoint ID; Spokane WA
22449,Sprint Nextel,Charlotte Amalie VI; Ponce PR; San Juan PR
22450,Sprint Nextel,Charlotte WV; Lynchburg VA; Roanoke VA

 

I also just looked at the iPhone PRL (51097).  It is still designed the same way on 800SMR as previously.    Scan PCS first and don't scan for 800SMR unless PCS is gone.  If PCS is gone, scan and acquire 800SMR then scan for PCS all the time as PCS is higher priority.  Android based phones are scan for 800SMR first and use it unless it is not available

  • Like 5
Link to comment
Share on other sites

I also just looked at the iPhone PRL (51097).  It is still designed the same way on 800SMR as previously.    Scan PCS first and don't scan for 800SMR unless PCS is gone.  If PCS is gone, scan and acquire 800SMR then scan for PCS all the time as PCS is higher priority.  Android based phones are scan for 800SMR first and use it unless it is not available

 

So, can we start calling CDMA1X 1900 "the iPhone ghetto"?

 

:P

 

AJ

  • Like 4
Link to comment
Share on other sites

In case you guys missed my other post in the PRL thread...the latest round of PRLs  56015, 25015, 51097(iphone5), etc...basically all 800SMR capable devices have new updates as of 6/5/2013. 

 

to make it easier let's just say what's not 800SMR scanned now:

 

Here are the only 4 800SMR SIDs that are NOT in the scans:

 

22429,Sprint Nextel,Boise ID; Brigham City UT; Jackson Hole WY; Salt Lake City UT; St. George UT

22433,Sprint Nextel,Pendleton OR; Sandpoint ID; Spokane WA

22449,Sprint Nextel,Charlotte Amalie VI; Ponce PR; San Juan PR

22450,Sprint Nextel,Charlotte WV; Lynchburg VA; Roanoke VA

 

I also just looked at the iPhone PRL (51097).  It is still designed the same way on 800SMR as previously.    Scan PCS first and don't scan for 800SMR unless PCS is gone.  If PCS is gone, scan and acquire 800SMR then scan for PCS all the time as PCS is higher priority.  Android based phones are scan for 800SMR first and use it unless it is not available

 

 

So are you saying that your PRL file contains all of the 4 SIDs that are missing in the latest 6/5/13 release of Sprint stock PRLs?  I assume your PRL file is more complete than the Sprint stock PRLs?

Link to comment
Share on other sites

 

 

In case you guys missed my other post in the PRL thread...the latest round of PRLs 56015, 25015, 51097(iphone5), etc...basically all 800SMR capable devices have new updates as of 6/5/2013.

 

to make it easier let's just say what's not 800SMR scanned now:

 

Here are the only 4 800SMR SIDs that are NOT in the scans:

 

22429,Sprint Nextel,Boise ID; Brigham City UT; Jackson Hole WY; Salt Lake City UT; St. George UT

 

22433,Sprint Nextel,Pendleton OR; Sandpoint ID; Spokane WA

 

22449,Sprint Nextel,Charlotte Amalie VI; Ponce PR; San Juan PR

 

22450,Sprint Nextel,Charlotte WV; Lynchburg VA; Roanoke VA

 

I also just looked at the iPhone PRL (51097). It is still designed the same way on 800SMR as previously. Scan PCS first and don't scan for 800SMR unless PCS is gone. If PCS is gone, scan and acquire 800SMR then scan for PCS all the time as PCS is higher priority. Android based phones are scan for 800SMR first and use it unless it is not available

 

 

 

So are you saying that your PRL file contains all of the 4 SIDs that are missing in the latest 6/5/13 release of Sprint stock PRLs? I assume your PRL file is more complete than the Sprint stock PRLs?

My testing one always has had all the 800SMR SIDS in them. The premier one is based off the corporate evdo roaming one.

 

It is a purely a testing one as you are dealing with messing with the voice side of your phone and you never know when an emergency will come up. Never know if e911 is right with that side either. Be careful with its use. But of course now that is not the case in most places but we have been seeing that test SID a good bit in Samsung markets.

 

Sent from my little Note2

 

 

  • Like 1
Link to comment
Share on other sites

Does anybody know if Sprint has updated their coverage map to show 800 mhz voice coverage?

 

It doesn't look like they have, not in my area at least. the coverage on the map appears the same on the map as it has for the past couple of years. 

Link to comment
Share on other sites

Can they really update their coverage maps with so many phones not supporting CDMA-800 still out there?

 

Wouldn't be a smart move.  Better to not report the enhanced coverage and just exceed peoples general expectations in my opinion.

Link to comment
Share on other sites

 

 

Can they really update their coverage maps with so many phones not supporting CDMA-800 still out there?

 

 

Wouldn't be a smart move. Better to not report the enhanced coverage and just exceed peoples general expectations in my opinion.

They could mark it as say, extended network, only accessible by some phones. Same disclaimer they have on LTE. Though they'd need to call it something besides extended, because that would confuse iPhone users :-p

 

Sent from my HTC ONE

 

 

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...