Jump to content

Sprint VoLTE Discussion Thread Redux


Recommended Posts

 

Quote

 

Sprint expects to deploy VoLTE starting this fall

 

It’s been a long time coming. Sprint has been preseeding the market with VoLTE-capable devices, and it expects to finally start commercially deploying VoLTE this fall.

“For more than a year we’ve been testing VoLTE and preseeding our customer base with VoLTE-capable devices in preparation for our commercial deployment starting this fall,” Sprint spokeswoman Adrienne Norton told FierceWirelessTech. “Our network today offers a great HD Voice experience on a very efficient 1x platform, and our goal with VoLTE is to match this same high-quality experience that our customers have today.”

 

The fall timeframe is the closest Sprint has given so far for a launch date after years of testing the technology. Back in 2014, network chief John Saw said the carrier was investing in VoLTE but it wasn’t in a big rush to roll it out. At the time, few carriers had actually deployed it at scale in such a way as to sustain a good voice service. Indeed, some other U.S. carriers ended up pushing back their deployment schedules and interoperability was an issue.

Former Sprint COO of technology Günther Ottendorfer explained in a 2016 Reddit AMA that VoLTE was on the roadmap but the company wanted to make sure customers had an even superior voice experience than what they get today. And HD voice took some pressure off the operator for launching VoLTE.

Fellow CDMA operator U.S. Cellular also took a more measured approach to VoLTE, citing greater challenges with it than its GSM-centric counterparts. U.S. Cellular CEO Kenneth Meyers back in 2016 described it as a “gap” that engineers were trying to overcome by moving gear to the top of towers, among other strategies.

 

 

Bout time. 

 
  • Like 10
  • Love 1
Link to comment
Share on other sites

Tri-Cities, TN area is ready for VoLTE based upon my observations using Calling Plus on my S8.  Glad to finally hear that Sprint is making the move to VoLTE, gonna be a great year for Sprint.

Link to comment
Share on other sites

21 minutes ago, clbowens said:

I think Calling Plus still needs some work, especially if you have a weak B41 signal.

I think Calling Plus was around only for testing. Letting users place calls over LTE with no prioritization on the network. It was almost like it was a worst case situation type testing. I guess it gave them better insight. From my experience, I used Calling Plus on my S8 to try out android and had no issues with calls breaking up or the other person not being able to hear me. Even on my iPhone X and doing faux VoLTE from a wi-fi calling dropping off onto LTE the calls are clear and the caller could hear me as well. 

 

Now what could set Sprint apart from the rest is if they were able to transition a VoLTE call onto 1x in the event your signal is low.

Link to comment
Share on other sites

5 hours ago, derrph said:

Now what could set Sprint apart from the rest is if they were able to transition a VoLTE call onto 1x in the event your signal is low.

That would be nice indeed, but I think efforts towards that end were scrapped a while ago.

Link to comment
Share on other sites

46 minutes ago, derrph said:

I think Calling Plus was around only for testing. Letting users place calls over LTE with no prioritization on the network. It was almost like it was a worst case situation type testing. I guess it gave them better insight. From my experience, I used Calling Plus on my S8 to try out android and had no issues with calls breaking up or the other person not being able to hear me. Even on my iPhone X and doing faux VoLTE from a wi-fi calling dropping off onto LTE the calls are clear and the caller could hear me as well. 

 

Now what could set Sprint apart from the rest is if they were able to transition a VoLTE call onto 1x in the event your signal is low.

Oh, interesting.

Link to comment
Share on other sites

1 hour ago, derrph said:

I think Calling Plus was around only for testing. Letting users place calls over LTE with no prioritization on the network. It was almost like it was a worst case situation type testing. I guess it gave them better insight. From my experience, I used Calling Plus on my S8 to try out android and had no issues with calls breaking up or the other person not being able to hear me. Even on my iPhone X and doing faux VoLTE from a wi-fi calling dropping off onto LTE the calls are clear and the caller could hear me as well. 

 

Now what could set Sprint apart from the rest is if they were able to transition a VoLTE call onto 1x in the event your signal is low.

Unfortunately that is not possible. If it was they would have had VOLTE long time again and vzw will have that also 

Link to comment
Share on other sites

Quick question. I don't think I've seen this mentioned before, or I just don't remember, but I can't imagine that I'm the only one to think about it. Has Sprint considered using EVDO/eHRPD to do VoLTE hand-offs to 3G? I would imagine if it's not being done, there is some technical limiting factor about it. I've always understood VoLTE to be a form of VOIP, which I would think means that it can go over any data network, and since eHRPD and LTE can hand-off to one another (or I think it was one can hand off to one but not to the other), then I can't see why Sprint couldn't do this. Of course, my lack of knowledge in the subject of VoLTE doesn't help me, either. :)

 

-Anthony

  • Like 2
Link to comment
Share on other sites

In my experience handoffs from LTE to CDMA are almost always accompanied by interruptions in whatever I'm streaming, so I don't see how a handoff from LTE to CDMA would work unless some kind of call waiting function is built in on the network side to prevent a dropped call.   I think it would be super annoying to the average user who would expect it to be a consistent flawless operation, and doesn't understand nor care about any technical challenges and limitations.

  • Like 1
Link to comment
Share on other sites

1 hour ago, Joski1624 said:

In my experience handoffs from LTE to CDMA are almost always accompanied by interruptions in whatever I'm streaming, so I don't see how a handoff from LTE to CDMA would work unless some kind of call waiting function is built in on the network side to prevent a dropped call.   I think it would be super annoying to the average user who would expect it to be a consistent flawless operation, and doesn't understand nor care about any technical challenges and limitations.

Now that you mention that, I believe I now remember that eHRPD made it so that CDMA to LTE handoffs would be smooth, but they didn't work the other way around. Which would explain why they couldn't use EVDO for fallback when they leave LTE coverage. This answers my question, thank you!

 

-Anthony

  • Thanks 1
Link to comment
Share on other sites

5 minutes ago, anthony.spina97 said:

Now that you mention that, I believe I now remember that eHRPD made it so that CDMA to LTE handoffs would be smooth, but they didn't work the other way around. Which would explain why they couldn't use EVDO for fallback when they leave LTE coverage. This answers my question, thank you!

 

-Anthony

Well, the network can instruct a device to drop from LTE to eHRPD/EVDO with an RRC release specifying the center frequency of the CDMA carrier...

Link to comment
Share on other sites

1 hour ago, anthony.spina97 said:

Now that you mention that, I believe I now remember that eHRPD made it so that CDMA to LTE handoffs would be smooth, but they didn't work the other way around. Which would explain why they couldn't use EVDO for fallback when they leave LTE coverage. This answers my question, thank you!

 

-Anthony

I don't know what you're talking about, but I've had smooth handoffs from LTE to eHRPD and vice versa for a year and a half now (maybe even more). The only thing I still see issues with is B25 handing off to a Clearwire B41. I need to close whatever data sessions I have in order to see the band change to Clearwire B41. B25 to B26 and vice versa is flawless).

VoLTE to 1xRTT is possible, but it is highly unreliable. I think Sprint is better off just pushing the limits of a weak LTE signal rather than setting a threshold point were calls are handed off to 1x and having a lot of calls drop.

Link to comment
Share on other sites

16 hours ago, greenbastard said:

I don't know what you're talking about, but I've had smooth handoffs from LTE to eHRPD and vice versa for a year and a half now (maybe even more). The only thing I still see issues with is B25 handing off to a Clearwire B41. I need to close whatever data sessions I have in order to see the band change to Clearwire B41. B25 to B26 and vice versa is flawless).

VoLTE to 1xRTT is possible, but it is highly unreliable. I think Sprint is better off just pushing the limits of a weak LTE signal rather than setting a threshold point were calls are handed off to 1x and having a lot of calls drop.

If I remember correctly Verizon has phones hold LTE much longer than it would if the phone were just active with data, etc. when a phone is on a VoLTE call, because even at the weakest of signals data can still be transmitted, the data rate is just so low it's not good for anything other than the very low data rates used by VoLTE. I imagine Sprint will do the same with their LTE network. 

Link to comment
Share on other sites

3 hours ago, Thomas L. said:

If I remember correctly Verizon has phones hold LTE much longer than it would if the phone were just active with data, etc. when a phone is on a VoLTE call, because even at the weakest of signals data can still be transmitted, the data rate is just so low it's not good for anything other than the very low data rates used by VoLTE. I imagine Sprint will do the same with their LTE network. 

I can verify that this is true as Verizon service in my neighborhood is abysmal. When driving in, Verizon phones will often hold a VoLTE call down to -132 to -134 dBm before dropping LTE and thus, the call. 

  • Like 1
Link to comment
Share on other sites

It's about time. Hopefully lilotimz or wiwavelength/s4gru can answer, but with eHRPD, can calls hand off from LTE to CDMA? Has Sprint made any progress with this? I noticed that it was mentioned earlier but nobody really got a clear answer.

Link to comment
Share on other sites

21 minutes ago, jakeuten said:

It's about time. Hopefully lilotimz or wiwavelength/s4gru can answer, but with eHRPD, can calls hand off from LTE to CDMA? Has Sprint made any progress with this? I noticed that it was mentioned earlier but nobody really got a clear answer.

I know of no reliable way to handoff from eHRPD or 1x to VoLTE.  Sprint has played with VoIP solutions to make it work.  However, I haven't seen hide nor hair regarding any VoIP/VoLTE solution coming.  I think Sprint is going to make a pure VoLTE play here.  And furthermore (this is just a guess), I believe that Sprint will deploy VoLTE in a similar way to AT&T.  Market by market.  Where markets can offer a decent VoLTE experience with the appropriate signal density, they will take it live.  It will likely be a roll out of 1.5-2 years to go systemwide.  It took AT&T forever.

Robert

Link to comment
Share on other sites

2 hours ago, S4GRU said:

Where markets can offer a decent VoLTE experience with the appropriate signal density, they will take it live.  It will likely be a roll out of 1.5-2 years to go systemwide.  It took AT&T forever.

I think it'll be good for them though because it'll allow them to focus upgrades in areas that are lacking the density necessary for a good VoLTE experience.

Do you think Sprint will keep VoLTE and CallingPlus active as separate things when VoLTE launches or do you think they'll end the CallingPlus name and just market WiFi Calling and VoLTE as separate things.

Link to comment
Share on other sites

3 hours ago, Paynefanbro said:

I think it'll be good for them though because it'll allow them to focus upgrades in areas that are lacking the density necessary for a good VoLTE experience.

Do you think Sprint will keep VoLTE and CallingPlus active as separate things when VoLTE launches or do you think they'll end the CallingPlus name and just market WiFi Calling and VoLTE as separate things.

I think they'll keep C+.  Because those devices won't necessarily support Sprint VoLTE.  They won't keep it forever though

  • Like 1
Link to comment
Share on other sites

WEll I have mixed feelings about it around here... (granted its new, and feelings are usually mixed)

When its working, its AWESOME.. when I am walking and talking and go into a basement while working... JOKE.  Which there is no way to truly fix it, guess it was the same back in the early days of cell phones..

I will say I was on a call, and they were on wifi or some other HD call on theirs.. and the sound was fantastic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...