Jump to content

Samsung Galaxy S8 & Dual Sim/Duos


Andrew Revering

Recommended Posts

-10 to - 15 rsrp difference. Also notice set band 41 at number 1 priority and reset phone, it defaults back band 25. Some some check your phone see if doing it to your s8.It did not do this before update.edit. save button would not work first 2 times now ok.

Link to comment
Share on other sites

-10 to - 15 rsrp difference. Also notice set band 41 at number 1 priority and reset phone, it defaults back band 25. Some some check your phone see if doing it to your s8.It did not do this before update.edit. save button would not work first 2 times now ok.

I made the same mistake, latest update has a save button, you have to scroll to bottom of page.
  • Like 1
Link to comment
Share on other sites

Mine has this issue. I will have a 116-118 1st carrier and the other two will be over 130.

Sent from my SM-G955U using Tapatalk

I have noticed a definite​ discrepancy in signal strength between the 1st and second carriers, but it still sticks to CA despite that.
Link to comment
Share on other sites

I have noticed a definite​ discrepancy in signal strength between the 1st and second carriers, but it still sticks to CA despite that.

The S7 doesn't have this issue though. So maybe a update?

 

Sent from my SM-G955U using Tapatalk

Link to comment
Share on other sites

Mine has this issue. I will have a 116-118 1st carrier and the other two will be over 130.

 

Sent from my SM-G955U using Tapatalk

The Pixel does the same thing. I think the radio is just more "tuned" to the PCC's frequency when CA is not actively engaged, which is a logical thing to do. When I'm on the middle carrier, the first and third both are about 10 dbm weaker. The adjacent carrier always shows 10 dbm weaker. It doesn't seem to really impact speed tests though (I don't remember if the rsrp equals out when CA engages, but my NSG screenshots show the SNR is about the same during a speed test, so I'm assuming the radio adjusts)

 

Sent from my Pixel XL using Tapatalk

Link to comment
Share on other sites

 

Has anybody else been getting "Unable to establish a wireless data connection"  LTE: ESM-31 EMM-x" error?...randomly ?...I've called support and they did the normal profile update/ factory reset procedures.

 

 

Been getting these a bunch today and some yesterday too again. Annoying.  But data still works, phone still works...just pops this data connection error up and you can't swipe it away easily. 

Link to comment
Share on other sites

Any one else have there phone start shutting apps off due to heat? I had it outside listening to music over a Bluetooth speaker music not charging or plugged in and the screen was off. Then the music shut off I went over and I had a heat warning the phone was super hot. It is not even 80 here so I did not think it would overheat like that. I just thought that was neat and didn't know if anyone experienced overheating not plugged in yet.

Link to comment
Share on other sites

Any one else have there phone start shutting apps off due to heat? I had it outside listening to music over a Bluetooth speaker music not charging or plugged in and the screen was off. Then the music shut off I went over and I had a heat warning the phone was super hot. It is not even 80 here so I did not think it would overheat like that. I just thought that was neat and didn't know if anyone experienced overheating not plugged in yet.

You said you had it outside, was the phone in direct sunlight?

Link to comment
Share on other sites

You said you had it outside, was the phone in direct sunlight?

Half of it may have been in the sunlight It was in the corner of a plastic pool storage bench and a bluetooth speaker. The angle of the sun would not put the phone in full direct sunlight. It was a cool day and nothing else that sat in the full sun was even close to the heat coming off of it. The Bluetooth speaker sitting right next to it covering the phone some from the sun was cool to the touch.

 

The only time I have had a phone get that hot was years ago when it was plugged in and I was watching video with full brightness.

Link to comment
Share on other sites

The only time I have had a phone get that hot was years ago when it was plugged in and I was watching video with full brightness.

Ditto on this.  I had an S-5 that would not work long in the sun if the screen brightness was turned up. It is natural to have the brightness up so you can see the screen outside.  The bright screen uses power and that equals heat.

Link to comment
Share on other sites

Ditto on this. I had an S-5 that would not work long in the sun if the screen brightness was turned up. It is natural to have the brightness up so you can see the screen outside. The bright screen uses power and that equals heat.

And that makes it work harder and slower

 

Sent from my Pixel XL using Tapatalk

Link to comment
Share on other sites

Half of it may have been in the sunlight It was in the corner of a plastic pool storage bench and a bluetooth speaker. The angle of the sun would not put the phone in full direct sunlight. It was a cool day and nothing else that sat in the full sun was even close to the heat coming off of it. The Bluetooth speaker sitting right next to it covering the phone some from the sun was cool to the touch.

 

The only time I have had a phone get that hot was years ago when it was plugged in and I was watching video with full brightness.

Well if it wasn't in direct sunlight in any way then I don't know what else could have happened that would caused that.  My s8+ been running nice and cool regardless of what I thrown at it thus far.

 

Edit:

 

Could have been a random runaway app causing the cpu to run faster and longer than normal causing the heat.  I did have one issue the other day with the oculus app running non stop overnight. I went to sleep with 100% battery and woke up with 43% left, normally it should have still been at least 95%. 

Link to comment
Share on other sites

I read some reports of rebooting issues, I just experienced my second random reboot (in 2 weeks) I do tax the phone, but it only seems to happen after I wake the device when their is a ton of apps running. 

 

Hopefully an update will address the issue.

Link to comment
Share on other sites

SOLUTION!!!!

-------------------

 

Ok, after months of research and online help, I've finally unlocked my phone per my original OP post.

 

I went with this guy on eBay:

http://www.ebay.com/itm/322518132661

 

He could improve his communication, but his service is outstanding! 

He unlocked my phone and I don't believe he used the engroot/z3x method that I've seen floating around online. In fact, I asked him about that and he said that's not what he does. From watching him do it and the feel of what's left behind is that he stripped it down and reinstalled basically what is on the sold unlocked phones. There's no weird app installed to maintain/change providers, it's not rooted, KNOX is NOT tripped... it feels like a stock-unlocked phone...and yes I'm under a contract AND financing.

 

My big concern was if I'd be able to go back to Sprint without it re-locking; as I basically am trying to convert my single-sim phone into a dual-sim phone to switch between providers. Sprint worked great right away, then I put in my Freedompop AT&T SIM... I entered the APN as instructed by Freedompop, and data, texting and calls all worked! It even said AT&T at the top. Now the big test... switching back to Sprint... I popped the SIM in, and it switched to Sprint and worked right away! YAY! Now is it re-locked? I put the AT&T SIM back in, NOPE, not locked! The AT&T SIM worked, and even remembered the APN settings so I can switch back and forth between Sprint & AT&T without changing any settings, no APN entries (beyond the first time), no changing network from GSM to CDMA... it's all automatic and works great!

 

Another aspect of my conversion to Dual-SIM was to have a Dual-SIM adapter installed so both SIMs can be installed on the phone, and I can switch SIMs/Providers/Numbers on the fly from within software... I had one from Simore but I tore the paper thin ribbon before I could even try it once... so I'll try again with Magic-SIM, which looks like a much more durable product.

 

So in the end... I recommend the eBay guy above, jiovaz9000 + Magic-Sim + FreedomPop AT&T SIM (free service)

 

  • Like 4
Link to comment
Share on other sites

 

 

So in the end... I recommend the eBay guy above, jiovaz9000 + Magic-Sim + FreedomPop AT&T SIM (free service)

I would love to try this but first I have to make sure this doesn't effect Sprint software updates. When we get the next security update let me know if it goes through for you.

 

 

Sent from my SM-G955U using Tapatalk

  • Like 1
Link to comment
Share on other sites

I would love to try this but first I have to make sure this doesn't effect Sprint software updates. When we get the next security update let me know if it goes through for you.

 

 

Sent from my SM-G955U using Tapatalk

My guess is he flashed firmware from the unlocked variant which works without any issues since they are signed by Samsung. If he used that method, it will most definitely fail the firmware checks in the Sprint OTA file. We'll see if that's how he did it, though.
  • Like 1
Link to comment
Share on other sites

My guess is he flashed firmware from the unlocked variant which works without any issues since they are signed by Samsung. If he used that method, it will most definitely fail the firmware checks in the Sprint OTA file. We'll see if that's how he did it, though.

On the Sprint GS7E, however, flashing with the Unlocked model 935U did not DSU the phone. The DSU had to be performed first, flashed to 935U, then other GSM SIM cards worked.

 

 

 

Sent from my SM-G935U using Tapatalk

  • Like 1
Link to comment
Share on other sites

Down to the last week to enter to win a NEW GALAXY S8!  Enter today!  Enter again!  Really, we need to make some money for the site!   :blink:

 

http://s4gru.com/index.php?/topic/7690-enter-to-win-a-new-samsung-galaxy-s8-and-help-support-s4gru/

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...