Jump to content

Study shows you’re probably not getting the broadband speeds you’re paying for


Paynefanbro

Recommended Posts

Some highlights among top ISPs:

Optimum Online customers saw speeds that were 3% faster than advertised, on average, and Verizon FiOS subscribers averaged about 1% over advertised speeds. Average data speeds seen by Cox customers were exactly in line with advertised speeds.

On the other side of the fence, data speeds for Time Warner Cable customers were 1% slower than advertised, and Comcast speeds averaged 2% slower than advertised.AT&T U-verse data speeds were 8% slower than they should be according to Ookla’s data, and Clear Wireless was the worst of all the ISPs tested, with download speeds that were 41% slower than advertised.

 

I often brag about my Optimum Online speeds. This makes me feel even better about bragging. 

  • Like 2
Link to comment
Share on other sites

Almost every company ive seen has it say up to X Mbps. Never a guaranteed speed. Some other companies might be different.

Link to comment
Share on other sites

Almost every company ive seen has it say up to X Mbps. Never a guaranteed speed. Some other companies might be different.

 

Mediacom here in Springfield, I have the 20-30Mbps tier, and generally get about 23-26. Sometimes I get as low at 15, but that's short lived.

 

Their other tiers are all "Up to" 10, 15, 50, or 100.

Link to comment
Share on other sites

I use Verizon FiOS and always get faster than I pay for. I'm on their 75/35 package and average over 85 down and 40 up. When I had time Warner I was lucky to get 75% of what they advertised on a good day.

 

Sent from my Nexus 5 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Mediacom here in Springfield, I have the 20-30Mbps tier, and generally get about 23-26. Sometimes I get as low at 15, but that's short lived.

 

Their other tiers are all "Up to" 10, 15, 50, or 100.

$60 plus tax for upto 12/1. Suddenlink just bought northland cables in east Texas. So we are in an upgrade phase to be linked into suddenlink's backend. Once that happens i can move to the 30/2 for $40 i believe. Once the upgrades are complete itll actually be 30/2 :)
Link to comment
Share on other sites

I typically dislike Comcast but my local Comcast bumped me up from 36mbps to 60, then doubled that for the same price I paid for the original 36. So now I get 130mbps.

 

Sent from my LG-LS980

When I moved into my neighborhood, they told me they would be bumping us up from like 30 to 50 at no charge. Considering I came from an overpriced att ISP paying about 40 bucks a month just for 6 down, I was pretty happy to only have to pay 29.99 for 50+. However, the one time I did need their customer service it was absolutely dreadful.

 

 

Sent from my iPhone 5s using Tapatalk

Link to comment
Share on other sites

I typically dislike Comcast but my local Comcast bumped me up from 36mbps to 60, then doubled that for the same price I paid for the original 36. So now I get 130mbps.

 

Sent from my LG-LS980

Id die to get 36Mbps...haha How much was the original 36Mbps?

Link to comment
Share on other sites

Shentel DSL is the only wired broadband available where I live. I pay $60 for 10/1. That doesn't include the $20 for the mandatory telephone line. If I could at least do away with the telephone charge, it would be quite as bad. It sucks but that's what happens when there's no competition.

 

Edit: I forgot to say that I do get the speeds I pay for.

Link to comment
Share on other sites

I pay for 18/1.5 and get about 20/1.8

 

I have FTTH, AT&T just doesn't offer much more speed for a reasonable price. I'm hoping for Gigapower since my whole neighborhood is a FTTH development.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...