Jump to content

Network Vision/LTE - New York City Market


Ace41690

Recommended Posts

Alltel

 

I know you're saying that in jest, but there's still a divested Alltel cluster of towers owned by Atlantic Tele-Network around where I live. It's in the process of being sold to AT&T, who I just looked up as the sponsor of the Yankees. I presume AT&T would have first dibs on any distributed antenna system in Yankee Stadium, am I right?

Link to comment
Share on other sites

Is anyone having problems connecting to LTE? I have an HTC EVO LTE, and up until yesterday morning - I was connecting to LTE with no problem at all. Now in the areas that I was getting LTE, my phone doesn't make any data connection at all. It just sits there and tries to connect. If I switch back to CDMA only - it connects to 3G right away. If i put it back on LTE/CDMA - nothing.

 

It's driving me nuts. Happening in Midtown and the Upper East Side.

Link to comment
Share on other sites

I know you're saying that in jest, but there's still a divested Alltel cluster of towers owned by Atlantic Tele-Network around where I live. It's in the process of being sold to AT&T, who I just looked up as the sponsor of the Yankees. I presume AT&T would have first dibs on any distributed antenna system in Yankee Stadium, am I right?

 

Check this out: (AT&T)

 

http://www.forbescustom.com/TelecomPgs/idcnews/4.13.10/YankeeStadiumATTP1.html

Link to comment
Share on other sites

Went to a Nets game 2 weeks ago and I think they have in-building repeaters. LTE signal was okay outside the arena but when I got to my seat, full bars of LTE. Likely they did the same with Yankee stadium but eh... I still suffer on game day and so does half the morrisonia area lol.

 

Yep, the Barclay Center is a great example of an install which works. How was the throughput during the game?

Link to comment
Share on other sites

I know you're saying that in jest, but there's still a divested Alltel cluster of towers owned by Atlantic Tele-Network around where I live. It's in the process of being sold to AT&T, who I just looked up as the sponsor of the Yankees. I presume AT&T would have first dibs on any distributed antenna system in Yankee Stadium, am I right?

 

That is correct, AT&T gets first dibs since they are the wireless sponsor of the Yankees. In other news, being at the stadium these last two nights made me notice some gaps in the 4G LTE coverage zone at the stadium. By the Grand Hall (Gate 6), I had approx 3 bars of LTE (on AOSP), but at my seats in Sec 136 (next to visiting bullpen) I strugged to get data connectivity in general. No 3G/4G. Sensorly does show that the stadium is covered, but I assume that the OEM's had the towers down for maintenance.

Link to comment
Share on other sites

 

 

Yep, the Barclay Center is a great example of an install which works. How was the throughput during the game?

 

Signal was fantastic. Did a speed test and it came out to just over 5mbps down and 3 up. Not that I need any faster but for an indoor solution, it was very snappy and there was nothing I couldn't do. I was happy the whole game (which the Nets beat the Hornets 108-98) ;-)

Link to comment
Share on other sites

 

 

That is correct, AT&T gets first dibs since they are the wireless sponsor of the Yankees. In other news, being at the stadium these last two nights made me notice some gaps in the 4G LTE coverage zone at the stadium. By the Grand Hall (Gate 6), I had approx 3 bars of LTE (on AOSP), but at my seats in Sec 136 (next to visiting bullpen) I strugged to get data connectivity in general. No 3G/4G. Sensorly does show that the stadium is covered, but I assume that the OEM's had the towers down for maintenance.

 

Damn Yankee fans taking up my precious bandwidth. I would've thought that you would have decent signal behind the visiting team's bullpen because I get about 3 solid bars of signal on Jerome ave right behind there.

Link to comment
Share on other sites

Damn Yankee fans taking up my precious bandwidth. I would've thought that you would have decent signal behind the visiting team's bullpen because I get about 3 solid bars of signal on Jerome ave right behind there.

 

Lots of cement between the two!

Link to comment
Share on other sites

Signal was fantastic. Did a speed test and it came out to just over 5mbps down and 3 up. Not that I need any faster but for an indoor solution, it was very snappy and there was nothing I couldn't do. I was happy the whole game (which the Nets beat the Hornets 108-98) ;-)

 

That's perfect. I'm really glad to hear that. I was there when the center first opened, Russell Peters did a comedy show, and my phone was roaming on Verizon the entire time.

Link to comment
Share on other sites

 

 

That's perfect. I'm really glad to hear that. I was there when the center first opened, Russell Peters did a comedy show, and my phone was roaming on Verizon the entire time.

 

Not anymore lol. Hopefully it's all around the entire facility and not just the basketball court.

Link to comment
Share on other sites

Wow I am shocked. At my apartment we were always getting horrible 1x and 3g signal and we have a airave. Today I was working on on wires and had to take the airave off. I was surprised to find out I have 4-6 bars and awesome 1.5mbps 3g speed with 70ms ping without airave. NV will make sprint very competitive. Awesome job sprint.

  • Like 1
Link to comment
Share on other sites

Now I am unsure of what to do with the airave. Should I just use the device to get 55dbm 1x service compared to 70dbm to 80dbm without airave? I actually did get the device for free without any charge monthly.

Link to comment
Share on other sites

Now I am unsure of what to do with the airave. Should I just use the device to get 55dbm 1x service compared to 70dbm to 80dbm without airave?

 

No, if you no longer need the Airave, turn it off. You could be causing interference issues for your neighbors.

 

AJ

Link to comment
Share on other sites

No, if you no longer need the Airave, turn it off. You could be causing interference issues for your neighbors.

 

AJ

 

AJ,

Would this be the reason signal in my residence has gone from full to half or none in my residence? I'm near a tower that has been upgraded at least on the 3g side about a block away.

Link to comment
Share on other sites

AJ,

Would this be the reason signal in my residence has gone from full to half or none in my residence? I'm near a tower that has been upgraded at least on the 3g side about a block away.

 

We would have no way of knowing. You would need to confirm by posting some signal metrics that the nearby site is currently active. It sounds like it could be down, or the radiation pattern could have been changed as part of its Network Vision makeover.

 

AJ

Link to comment
Share on other sites

 

 

AJ,

Would this be the reason signal in my residence has gone from full to half or none in my residence? I'm near a tower that has been upgraded at least on the 3g side about a block away.

Dial *99 if you are connected through airave, you will hear computer telling you that you are connected to an airave. Other easy way of telling is also by three beeps when you dial out or accepting calls.

Link to comment
Share on other sites

We would have no way of knowing. You would need to confirm by posting some signal metrics that the nearby site is currently active. It sounds like it could be down, or the radiation pattern could have been changed as part of its Network Vision makeover.

 

AJ

 

I'll see what i come up with later when i get home.

Dial *99 if you are connected through airave, you will hear computer telling you that you are connected to an airave. Other easy way of telling is also by three beeps when you dial out or accepting calls.

 

Most of the time if i make a call i know it's on the airrave, they just happened to update the tower nearest me.

Link to comment
Share on other sites

Anyone been to MSG lately? I went first week feb and didn't notice any LTE.

http://www.tpicom.com/pdf/news25.pdf

 

 

TPI brings LTE-DAS to the Madison Square

Garden and Improves Wireless Bandwidth

Dallas, TX—January 24, 2013– TPI a leading operator of indoor LTEDAS wireless infrastructure, has installed an LTE Distributed Antenna

System (“DAS”) in the Garden. The LTE DAS network will provide

Madison Square Garden fans with significantly increased bandwidth to

their mobile devices connected during games, with improved wireless

services to the millions that visit annually.

“TPI Systems owns and operates multiple DAS networks at

professional sports stadiums across the country,” said Jimmy Chiles,

President of TPI. “Our neutral-host LTE DAS networks can be utilized

by all major wireless carriers to provide their customers with increased

bandwidth during games, concerts, and other highly attended events.

We are excited to bring the latest LTE technology to the Madison

Square Garden enabling the finest wireless experience to millions of

fans and patrons.”

According to Vice President Bob Van Dyk , “We are committed to

providing exceptional LTE service to the fans while attending these big

events”. TPI operates a technology platform known as DAS that

delivers the signals from AT&T, Verizon and Sprint to the fans that visit

MSG and ensure thatfans stay connected during big events.” The new

TPI LTE-DAS constructed at MSG includes the installation of 550

antennas located throughout the Garden that will improve wireless

coverage and bandwidth during peak event times. In addition to

ensuring voice calls are successfully connected, the LTE-DAS will allow

media phones, tablets and other devices to access the internet, run

interactive applications and stream photos and videos to social

networking sites among many other benefits.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...