Jump to content

Samsung Galaxy Note 2


pyroscott

Recommended Posts

Well, I have a picture in the northern Jersey thread (I don't have it right now). I don't know what specifics you want to know, but it's happened with another phone also. http://tapatalk.com/tapatalk_image.php?img=aHR0cDovL2ltZy50YXBhdGFsay5jb20vZC8xMy8xMi8wMy9vcmlnaW5hbC9nZXphN2VwZS5qcGc%3D

 

Sent from my SPH-L900 using Tapatalk

This looks as if LTE might be disabled by software, and by the screenshot im assuming this is a single band phone (as you have both LTE and 1XRTT in view. You might want to look into the phone settings to make sure you have CDMA/LTE enabled.

Link to comment
Share on other sites

This looks as if LTE might be disabled by software, and by the screenshot im assuming this is a single band phone (as you have both LTE and 1XRTT in view. You might want to look into the phone settings to make sure you have CDMA/LTE enabled.

Well I have a note 2,and when I put it into CDMA, it receives 3g and no sign of lte. If I put it into lte/CDMA, then it either receives eHARPD or LTE, but no actual data.

 

Sent from my SPH-L900 using Tapatalk

 

 

Link to comment
Share on other sites

Well I have a note 2,and when I put it into CDMA, it receives 3g and no sign of lte. If I put it into lte/CDMA, then it either receives eHARPD or LTE, but no actual data.

 

Sent from my SPH-L900 using Tapatalk

Call sprint and have them guide you through the re activation process, it could be related to the LTE sim not being activated properly (its an internal sim non removable on older phones)

Link to comment
Share on other sites

  • 2 weeks later...

Still broken on 4.3 and I don't think Sprint nor Samsung intend on fixing it. The Note 2 has been out for so long now, they could've been had a fix if they intended on fixing. 2000 prl was their lazy way of sweeping it under the rug..

  • Like 1
Link to comment
Share on other sites

Call sprint and have them guide you through the re activation process, it could be related to the LTE sim not being activated properly (its an internal sim non removable on older phones)

Does it matter if I am signed up with another carrier that uses sprint? I use ubitelecom / helio.

 

Sent from my SPH-L900 using Tapatalk

 

 

Link to comment
Share on other sites

  • 2 weeks later...

Out of pure frustration at my LTE speeds and the 200X PRL series, I have finally sent an email to Dan@sprint.com, I highly doubt I will get a real answer, but if anything comes of it I will let ya'll know.

  • Like 1
Link to comment
Share on other sites

Out of pure frustration at my LTE speeds and the 200X PRL series, I have finally sent an email to Dan@sprint.com, I highly doubt I will get a real answer, but if anything comes of it I will let ya'll know.

 

Yeah, any news would be great.  However, I think I have come to the conclusion now that we are almost 4 months with the GN3 and they still have not solved the GN2 800 problem.  I think that it's a hardware problem and they are trying to sweep it under the rug.  I think the GN2 is now going into the dustbin of history.

 

Robert

Link to comment
Share on other sites

Yeah, any news would be great.  However, I think I have come to the conclusion now that we are almost 4 months with the GN3 and they still have not solved the GN2 800 problem.  I think that it's a hardware problem and they are trying to sweep it under the rug.  I think the GN2 is now going into the dustbin of history.

 

Robert

I agree Robert, I'm hoping to get something like that on record and then push for a different type of resolution.  The Sprint and Samsung pages for the Note 2 still indicate BC10 support.

Link to comment
Share on other sites

Yeah, any news would be great.  However, I think I have come to the conclusion now that we are almost 4 months with the GN3 and they still have not solved the GN2 800 problem.  I think that it's a hardware problem and they are trying to sweep it under the rug.  I think the GN2 is now going into the dustbin of history.

 

Robert

 

I agree there.  I believe they had a QC issue with some batches and decided to just axe them all from BC10 support as it was really the only way.

Link to comment
Share on other sites

I agree there.  I believe they had a QC issue with some batches and decided to just axe them all from BC10 support as it was really the only way.

 

Yeah, if it was a NV OEM problem (which I first suspected), they could have PRL's written that excluded the regions with affeced equipment.  However, I think it was a Samsung problem.  I always had BC10 problems with my Note 2, whereas you didn't.  And I had problems on Ericsson in Texas and New Mexico, Samsung in Colorado and ALU in Phoenix.  My device had problems on all three OEMs.

 

I think your theory is the most likely.  A significant enough of GN2's are having BC10 problems, that it is better just to exclude them from the PRL's than to fess up to the problem and get new devices to those affected.

 

Robert

Link to comment
Share on other sites

Finally talked with Exec support (due to my scheduling issues) and I didn't learn anything new, big shocker.  The PRL was changed as a preventative measure due to reported issues (dropped calls, unable to make/receive calls) on eSMR spectrum.  It is still an open item and is being worked on, however, there is no ETA on a fix.  I did press and was told that it is expected to be fixed.

Link to comment
Share on other sites

any body have problems with slow charging now or not holding passwords since 4.3 update starting see more problems than before ?

Nope but im on the new digiblur 4.3 rom Ive unofficially named it coziblur 4.3 due to cozibacks huge part im making it happen. Its a beautiful rom fast smooth battery is insane I can get 12 hrs of HEAVY use, no hicups for me yet. Ive been on it since Friday.

 

Sent from my CoziBlured4.3 gn2 using Taptalk pro

 

 

Link to comment
Share on other sites

  • 2 weeks later...

It took about 3 months but Sprint pushed 2011 PRL to my phone.  Updated the hiddenmenu.apk file and updated it back to 24016.

 

Is there some way to freeze an app to prevent an automatic PRL update in the future?  Edit: I think I found the answer:

 

Freeze system update and Sprint DM services

Link to comment
Share on other sites

soooo why does mine run 800 fine on the custom prls???

You can make and receive calls on 1X 800 and the call stays on 800? If so, you may have one of the GN2's that doesn't seem effected. My GN2 would not work on 800. It would connect and sit on the channel. But SMS and voice calls would not work. If the 800 signal was weak enough, it would drop me over to 1900 to make an out going call.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

 

 

Link to comment
Share on other sites

You can make and receive calls on 1X 800 and the call stays on 800? If so, you may have one of the GN2's that doesn't seem effected. My GN2 would not work on 800. It would connect and sit on the channel. But SMS and voice calls would not work. If the 800 signal was weak enough, it would drop me over to 1900 to make an out going call.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

 

I just recently started using custom PRL's again, and it seems that the 1X 800 is okay where I am. I haven't noticed any issues with it on my GN2 and it seems to hold on to the signal and not fall to 1900.

Link to comment
Share on other sites

You can make and receive calls on 1X 800 and the call stays on 800? If so, you may have one of the GN2's that doesn't seem effected. My GN2 would not work on 800. It would connect and sit on the channel. But SMS and voice calls would not work. If the 800 signal was weak enough, it would drop me over to 1900 to make an out going call.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

Well then that makes sense when 800 1st hit out here last week...

 

when it was a weak signal it was crackly and i was wondering "why is everyone saying 800 is so great?"  and in some cases wasnt making calls....

 

now that its all over, it seems fine....still a little "off" sounding but not really worse then 1900....more so if it stays under -105

Link to comment
Share on other sites

I just recently started using custom PRL's again, and it seems that the 1X 800 is okay where I am. I haven't noticed any issues with it on my GN2 and it seems to hold on to the signal and not fall to 1900.

You must have lucked out, as well. My GN2 has never been able to make/receive calls or send/receive texts while on 1X800, only on 1900. :(

Link to comment
Share on other sites

You must have lucked out, as well. My GN2 has never been able to make/receive calls or send/receive texts while on 1X800, only on 1900. :(

Oh really? :/

 

I've been experimenting with 1X800 to see if it'll be more reliable than my Airave. 1900 has never really worked here so if 800 is stable enough, I might send it back to Sprint.

 

Sent from my Samsung Galaxy Note 2 using Tapatalk 4 HD.

 

 

Link to comment
Share on other sites

800 seems to work fine for me. I bought mine on launch day, if we want to compare production times.

 

Sent from my SPH-L900 using Tapatalk

I bought mine on launch day too. Titanium Gray in Santa Fe, NM. Doesn't work on CDMA 800, and I've tested it on Ericsson, ALU and Samsung NV 800 signals.

 

It will connect to Channel 476. But it will not call out. Receive calls. Or SMS. If the 800 signal is weak, it will shunt me over to 1900 to make a call.

 

Robert via Nexus 5 using Tapatalk

 

 

Link to comment
Share on other sites

You can make and receive calls on 1X 800 and the call stays on 800? If so, you may have one of the GN2's that doesn't seem effected. My GN2 would not work on 800. It would connect and sit on the channel. But SMS and voice calls would not work. If the 800 signal was weak enough, it would drop me over to 1900 to make an out going call.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

all good on 1x 800 here for me as well while on lte or erphd can do it all. It is actually seems to be improving with time. Call quality suffers when the signal is bad but so does 1900. I think the big thing is range, if your connected to a tower 20 miles away you shouldn't expect high call quality. You can connect sure but it will be crackly. Now that they have brought on a significant amount of 1x 800 sites that quality should improve. My 2 cents. I'm so happy now with my gN2 I have a n5 paper weight.

 

Sent from my CoziBlurred4.3 gN2

 

 

Link to comment
Share on other sites

On call on 800 uvady5u8.jpg

 

I guess the 'problem' will never be corrected then since it is a per-phone issue based on above.

 

I've been on 800 all day in WI and Chicago and no issues with texts either.

 

Sorry to the unfortunate ones!

 

Sent from my SPH-L900 using Tapatalk

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...