SignalCheck Beta Crew Forum

[dkyeager]

Sent diags from a S22+ with T-Mobile postpaid on eSIM and US Mobile prepaid on pSIM  with eSIM as primary.  When a call comes in on the pSIM secondary, data also shifts over to it, but SCP Pro still shows the eSIM LTE and 5G. 

Cellmapper always shows both. 

Speedtest assumes primary eSIM, but speed is definitely the pSIM secondary.

[dkyeager]

Above comment was production version. Updated to beta.

Status line has band but no RSRP, which does change bands. Maybe just a formating issue on RSRP number? "--".

Top lines are much like s21 factory unlocked: 5g-NR heading, followed by SS-RSRP and SS-RSRQ with values. UL and DL Earfcn, CA info displayed. 

Separately, phone does display correct bands using *#0011#. Gives indication 100MHz of n41 and second n41 carrier at 40MHz plus lte 66 at 20bw.

Without load it drops n41 and adds LTE band 2 which is implied in  SCP 2xCA 20+20 under LTE AWS heading section.  SCP does not change under load (5g NSA).

[mikejeep]

On 11/16/2022 at 7:27 AM, dkyeager said:

Status line has band but no RSRP, which does change bands. Maybe just a formating issue on RSRP number? "--".

That is a known Android 13 bug discussed above and on the app website. It has been reported on the Android IssueTracker, please give it a +1 to help attract attention: https://issuetracker.google.com/issues/244063666

[dkyeager]

1 hour ago, mikejeep said:

That is a known Android 13 bug discussed above and on the app website. It has been reported on the Android IssueTracker, please give it a +1 to help attract attention: https://issuetracker.google.com/issues/244063666

How soon I forget. Already starred that when first requested.

[dkyeager]

Went out to Minneapolis. Saw n7 issue. Returned to Columbus. Now get n38. Sent diags for n38. Narfcn is 520110 on *#0011# service mode.  If I force it to SA, it is n41 of course at the same frequency

[mikejeep]

New beta is coming very soon (not tonight) that will include actual login for web uploads (find your password!) and some more bugfixes. Taking me a long time to get the login authentication working but I am almost there. Getting this working will open up the door to lots of cool possibilities with the web data in the future.. 😎

[mikejeep]

A new SignalCheck beta is rolling out now and should be available shortly! The most significant changes in this version are an overhaul of the web upload routines. Password authentication (signalcheck.net account) is now required. To upload data, go to the menu and select Logs > Upload Web Data. The upload shortcut (accessed by clicking on the pending points display on the main screen) still works, however you will need to use the menu option the first time in order to log in. Please test the upload functionality as much as possible and share any suggestions for improvement.

You can have one web account for multiple devices; there is a "Client" field that users can configure upon login. This field defaults to your device make/model but can be any text. All of your active sessions are displayed on the Account page on signalcheck.net. Sessions can be deleted from the website or by logging out on the app.

Overhauling the upload functionality and implementing secure login should open the door for more features down the road, perhaps some sort of logic to identify sites for Site Notes, etc.. there is a lot of interesting potential here.

Known issues with this release:

Once logged in, there is a delay in displaying the Upload Web Data window while the app contacts the server to validate your login. The delay varies depending on network conditions, but should only be a brief moment. I am working on improving the UI to make it more clear that the app is doing something and not freezing.

Creating a new web account is not supported from within the app yet. There is a button for it, but you are simply directed to the website for now.

Other notable changes:

• Added accent colors for additional wireless providers.
• Improved web upload processing and error handling.
• Resolved issue with delayed status bar icon at startup on Android 12+ devices.

As always, I appreciate your support and encourage feedback, publicly or privately. I intend to release this version to the public (with upload features hidden, for now -- that is still in beta testing) if testing proves it to be stable.

[Trip]

Good morning,

I've just tried the update on my main phone and gotten a null pointer exception when I try to log in.  Not really sure what else to do, but here's relevant screenshots.

https://imgur.com/a/NvEQiDG

And I checked and it does it regardless of whether the password is right or wrong. 

EDIT:  I also tried removing the spaces from the device name (just "S21FE") and that didn't fix it.  Interestingly, I'm looking at the website and I do see multiple "sessions" in my list there.  So it looks like it may be logging in on the web site but then either failing to understand the acknowledgement on the app side since the next time I try it says I'm not logged in.

I was going there to try to remove the non-alphanumeric characters from my password, as I know Cell Mapper has a problem with those, but can't figure out how to do it through the website.

- Trip

[mmark27]

3 hours ago, Trip said:

Good morning,

I've just tried the update on my main phone and gotten a null pointer exception when I try to log in.  Not really sure what else to do, but here's relevant screenshots.

https://imgur.com/a/NvEQiDG

And I checked and it does it regardless of whether the password is right or wrong. 

EDIT:  I also tried removing the spaces from the device name (just "S21FE") and that didn't fix it.  Interestingly, I'm looking at the website and I do see multiple "sessions" in my list there.  So it looks like it may be logging in on the web site but then either failing to understand the acknowledgement on the app side since the next time I try it says I'm not logged in.

I was going there to try to remove the non-alphanumeric characters from my password, as I know Cell Mapper has a problem with those, but can't figure out how to do it through the website.

- Trip

I see the same Null Pointer Exception error when I try to log in. Pw is correct, etc. 

[mikejeep]

Hmm, that is odd, I cannot replicate that on my end. Should not be any restrictions on spaces or special characters in any of the fields. Could you each try again, and submit diagnostic reports immediately after so I can see if anything is being logged? Thanks!

[mmark27]

1 minute ago, mikejeep said:

Hmm, that is odd, I cannot replicate that on my end. Should not be any restrictions on spaces or special characters in any of the fields. Could you each try again, and submit diagnostic reports immediately after so I can see if anything is being logged? Thanks!

Just sent diagnostics

[mikejeep]

Not sure what is causing that issue for some users (and not me!), but made some adjustments and rolling out another beta update now.. if you receive additional errors on the new version, please submit diagnostics immediately following your login attempt. Thanks!

[mmark27]

1 hour ago, mikejeep said:

Not sure what is causing that issue for some users (and not me!), but made some adjustments and rolling out another beta update now.. if you receive additional errors on the new version, please submit diagnostics immediately following your login attempt. Thanks!

Says login error [null] now

[mikejeep]

13 minutes ago, mmark27 said:

Says login error [null] now

Could you please try again and submit diagnostics immediately following so I can see what's up.. thanks.

[mmark27]

17 minutes ago, mikejeep said:

Could you please try again and submit diagnostics immediately following so I can see what's up.. thanks.

oh yeah, I did already

[Trip]

I sent diagnostics on the new update as well a little while ago.

- Trip

[mikejeep]

Thank you both, not sure if there is a server issue (@RAvirani?) or I'm just completely missing something, I can see the error but cannot replicate it on my end.

If others could chime in with their experience (positive or negative), it might help me narrow down a cause. Thanks!

[RAvirani]

Can someone having the error go to the website, log in, click on your name in the top right corner, and check if there are any devices added to your account?

[S4GRU]

3 minutes ago, RAvirani said:

Can someone having the error go to the website, log in, click on your name in the top right corner, and check if there are any devices added to your account?

I am getting a "Site cannot be found" error trying to go to the website page.  I tried on my local work ISP and T-Mobile network.

Robert

[mmark27]

4 minutes ago, S4GRU said:

I am getting a "Site cannot be found" error trying to go to the website page.  I tried on my local work ISP and T-Mobile network.

Robert

Ditto

[RAvirani]

Looks like a Cloudflare problem  

Working on it…

[RAvirani]

Should be resolved.

[CrackedLCD]

I'm also having the login error null issue; report sent just now.

This is my first time trying to login so I had to create an account, but I was able to login on the website.  There's a cell right on top of my house and I was hoping to move it, but it seems I don't have enough uploads yet.

Edited December 7, 2022 by CrackedLCD

[S4GRU]

1 hour ago, RAvirani said:

Can someone having the error go to the website, log in, click on your name in the top right corner, and check if there are any devices added to your account?

OK.  Now site back up and connected.  I log in.  I see my Google Pixel 7 Pro device listed.  I try to sign in using the app.  Get the login error null issue.  I go in and delete my device from the list on the website.  Verified it is removed from the list.  I go back and try to sign in again using the app.  NULL  Verified that the device reappeared when I added in the device list.  It is there.

Robert

EDIT:  And I have tried doing a force stop, hard reboot and try signing in all fresh.  Same problem.

[PedroDaGr8]

I am getting the same issue. My devices show up on the SignalCheck website but the app doesn't seem to know that it occurred successfully. I sent a diagnostics immediately after the failure.