Jump to content

SignalCheck - Android app to monitor your Wi-Fi/2G/3G/4G LTE/5G-NR signal strengths


mikejeep

Recommended Posts

Mike, tried sending diagnostic, but said failed

 

I just tried as well and ran into the same issue.. I don't know what keeps happening. The app sends the data to a very simple script on my website, a script that I never touch. I have no idea why it keeps giving that odd "Temporary Redirect" error. I'm on it...

 

-Mike

  • Like 1
Link to comment
Share on other sites

I just tried as well and ran into the same issue.. I don't know what keeps happening. The app sends the data to a very simple script on my website, a script that I never touch. I have no idea why it keeps giving that odd "Temporary Redirect" error. I'm on it...

 

-Mike

Tried sending the CA diagnostic for you

 

Sent from my SM-G955U using Tapatalk

  • Like 1
Link to comment
Share on other sites

Tried sending the CA diagnostic for you

 

Thanks. Keep trying; I just tried about a dozen times, and most of them went through. I am looking into it and intend to change the app itself to be more robust. Unfortunately the way it's configured now, the server doesn't give any technical details about why the report is failing like this.

 

EDIT: Should be resolved for now; I think the hosting server is just getting overloaded. Unfortunately I'm paid up for another 18 months and don't want to throw that away.. I will keep working on the app side to handle these issues better.

 

-Mike

Edited by mikejeep
  • Like 3
Link to comment
Share on other sites

Not yet by earfcn just by GCI and ALU 10x10 should end with 11/12/13. That is why ingenium first image shows 10x10. I also thought earfcn 8640 was 10x10.

 

Sprint does not always show 10x10 in GCI format depending on the market like Pittsburgh is not shown by GCI.

8640 is a 10x10 carrier

 

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

Mike,
I got excited when I thought they upgraded this small cell site to B41, but when I checked the engineering screen, it's still B25. I don't know if anyone had showed you this yet, but it's misidentifying it as B41. I took two screen shots because it's two different small cells at the same site. I haven't checked the two other small cell sites near me yet. da0e3a2038eeee29247f7af38c11fff5.jpg31804b1e6fb91ab7372e5fab8df59ff8.jpg

Sent from my SM-G935P using Tapatalk

  • Like 2
Link to comment
Share on other sites

hmmm, a 1900Mhz small cell. Photos would be great (place in another Shentel thread). 800Mhz was a known possibility. Overall B41 still the right way to go given the odds. Might need an override list option. Good find!

Link to comment
Share on other sites

hmmm, a 1900Mhz small cell. Photos would be great (place in another Shentel thread). 800Mhz was a known possibility. Overall B41 still the right way to go given the odds. Might need an override list option. Good find!

 

I think they've been around for some time. Before B41 small cells were considered for deployment.

Link to comment
Share on other sites

I think they've been around for some time. Before B41 small cells were considered for deployment.

You are correct. Before Softbank. Useful, but evolutionary dead ends.

 

Sent from my LG-LS980 using Tapatalk

Link to comment
Share on other sites

I posted this in the Nexus 5X thread but was told it might be bad data. Have you ever seen ATT band 25 reported? I'm no longer in that area (Somerset KY area if it's not in the screenshot), so I can't attempt to recreate it.

4ebdcfd06b7ac83e3aaf26cb16837f18.jpg

 

Sent from my Nexus 5X using Tapatalk

Link to comment
Share on other sites

I posted this in the Nexus 5X thread but was told it might be bad data. Have you ever seen ATT band 25 reported? I'm no longer in that area (Somerset KY area if it's not in the screenshot), so I can't attempt to recreate it.

4ebdcfd06b7ac83e3aaf26cb16837f18.jpg

 

Sent from my Nexus 5X using Tapatalk

We have seen AT&T implementing MFBI and broadcasting in the PCS G Block in select areas, the first more often that the latter, although this very well could be stale data. Did you have a chance to grab engineering screenshots?

Link to comment
Share on other sites

We have seen AT&T implementing MFBI and broadcasting in the PCS G Block in select areas, the first more often that the latter, although this very well could be stale data. Did you have a chance to grab engineering screenshots?

Unfortunately I didn't think to do that

 

Sent from my Nexus 5X using Tapatalk

Link to comment
Share on other sites

Looking for a hand from my faithful followers.. Android has an online bug tracker that helps sort out issues with the OS. Users can "vote" for issues by giving them a 'star' which helps bring them to the attention of the important powers that be. If you haven't already, could you take a moment and 'star' the following Android bug reports to help work some of the glitches out that will make SignalCheck a better app? It only takes a moment.

 

Bug report for LTE neighbors not displaying in Android 7: https://issuetracker.google.com/issues/63848701

Bug report for invalid LTE EARFCN data with newer bands: https://issuetracker.google.com/issues/37136986

Request to add a method to obtain LTE bandwidth: https://issuetracker.google.com/issues/37132691

 

And for reading this far down, I will reward you with the good news that another SCP update is on the horizon.. testing should be done soon.

 

Thanks!

-Mike

 

  • Like 13
Link to comment
Share on other sites

I starred the issues. Just wondering if you saw the bug I posted about a few days ago.

 

http://s4gru.com/index.php?/topic/3060-signalcheck-android-app-to-monitor-your-2g3g4g-lte-signal-strengths/?p=512380

 

Thanks! I did see that.. I've been thinking about it a lot, and hadn't come up with a great approach on how to address it so I hadn't replied yet. The problem is it's perfectly fitting the GCI pattern for B41 SC (even third character; characters 4-6 exceed 900; sector 01). This is the first B25 report I've seen, but I worry that it won't will be the last. So do I just display them all as small cells and eliminate the band designation? Or is this going to be a rare find?

 

-Mike

Link to comment
Share on other sites

Thanks! I did see that.. I've been thinking about it a lot, and hadn't come up with a great approach on how to address it so I hadn't replied yet. The problem is it's perfectly fitting the GCI pattern for B41 SC (even third character; characters 4-6 exceed 900; sector 01). This is the first B25 report I've seen, but I worry that it won't will be the last. So do I just display them all as small cells and eliminate the band designation? Or is this going to be a rare find?

 

-Mike

It's probably a rare find according to a conversation I had with another member. Apparent Shentel used some B25 small cells before B41 small cells became available. Maybe some others with knowledge can comment.

 

Sent from my SM-G935P using Tapatalk

  • Like 1
Link to comment
Share on other sites

Just pushed out an update to SignalCheck Pro, version 4.44.. everyone can grab it on Google Play here! It was more significant than I originally intended, but that's good for you guys.. here are the highlights:
 
NEW OPTIONS:

Display mobile connection IP address
When the app is in the foreground and the mobile data connection (not Wi-Fi) is active, you will see your external IP address displayed. PLEASE NOTE: This feature uses data. It pings my server which simply responds with your external IP -- nothing is captured, logged, or saved at all. It is only a small amount of data (literally, the response is just your IP in plain text), but it will happen every time your mobile signal changes. I do not expect it to be a significant amount of data, but for an app that really doesn't use data, this is something worth pointing out. When the app is not in the foreground, you are on Wi-Fi, or this option is disabled (as it is by default), nothing is displayed and no data is used.
 
Display Reset Mobile Connection button on the action bar
You can now show the button on the main screen, action bar, both, or neither.
 
Hide CDMA 1X display when connected to LTE
If you're a big fan of neighbor cells, this should give you more screen real estate. This only changes the main screen display; logs will still record GCI and any notification icons will still reflect a 1X connection if present.

Display LTE ECI (decimal) instead of GCI (hex)
Somebody asked for it a long time ago. This only changes the main screen display; logs will still record GCI.

 
NOTABLE NEW FEATURES:

Added feature to add current location to a site note
When editing a site note, you will see a new button "HERE" that will fill the prompt with your current location if you have the app's Location Service enabled. If "HERE" is grayed out, the app didn't have your location coordinates at the time you opened the prompt. If you decide you don't want to use the address that pops up, simply cancel the prompt and your previous note will remain in place.
 
Improved diagnostic reports; failed reports will now be saved and can be manually resubmitted from the Send Diagnostics screen
If you try to send diagnostics but your connection (or my server) is unavailable, the report will be saved on your device. It will be attempted again when you send another report, or if you select the "Send Saved" option from the diagnostic report screen. Should be very helpful to those of you who do testing with deactivated devices.

Changed provider to indicate if CDMA 1X connection is a Sprint Airave or 800 SMR
This helps make CDMA logs a bit more useful, and brings CDMA logging more in line with how LTE providers are logged.
 
Added donation link to About screen
Those of you who have asked for it, you can now throw me a few extra bucks if you're feeling generous. You will get nothing in return other than knowing you made my day and motivated further development! Thank you!
 

 
BUG FIXES AND LESS-EXCITING STUFF:

  • Added indicators for some Sprint LTE band 25 oDAS cells.
  • Added notification icons for LTE bands outside of North America.
  • Resolved force closes at startup in certain situations.
  • Resolved force closes when requested permissions are not immediately granted on Android 6+.
  • Resolved issue with connection titles overlapping signal meters.
  • Resolved issue with geocoder features not working.
  • Resolved issue with LTE 1900 notification icons missing.
  • Resolved issue with LTE band conflicts between native EARFCN and GCI-calculated band.
  • Resolved issue with LTE frequency title not updating properly in certain situations.
  • Resolved issue with misidentified Sprint LTE band 25 10×10 sites in certain areas.
  • Resolved issue with unreliable CDMA 1X BSL and Site Note displayed in the notification pulldown when a call is in progress.

 

A *long* overdue update to SignalCheck Lite is finally on the horizon as well, it will bring the free version up to speed with all relevant features and fixes to date.

 

As always, feedback is welcomed and my sincerest thanks to everyone for their support. And to my Beta Crew for being a huge help!
 
-Mike

  • Like 10
Link to comment
Share on other sites

Just pushed out an update to SignalCheck Pro, version 4.44.. everyone can grab it on Google Play here! It was more significant than I originally intended, but that's good for you guys.. here are the highlights:

 

NEW OPTIONS:

 

Display mobile connection IP address

When the app is in the foreground and the mobile data connection (not Wi-Fi) is active, you will see your external IP address displayed. PLEASE NOTE: This feature uses data. It pings my server which simply responds with your external IP -- nothing is captured, logged, or saved at all. It is only a small amount of data (literally, the response is just your IP in plain text), but it will happen every time your mobile signal changes. I do not expect it to be a significant amount of data, but for an app that really doesn't use data, this is something worth pointing out. When the app is not in the foreground, you are on Wi-Fi, or this option is disabled (as it is by default), nothing is displayed and no data is used.

 

Display Reset Mobile Connection button on the action bar

You can now show the button on the main screen, action bar, both, or neither.

 

Hide CDMA 1X display when connected to LTE

If you're a big fan of neighbor cells, this should give you more screen real estate. This only changes the main screen display; logs will still record GCI and any notification icons will still reflect a 1X connection if present.

 

Display LTE ECI (decimal) instead of GCI (hex)

Somebody asked for it a long time ago. This only changes the main screen display; logs will still record GCI.

 

 

NOTABLE NEW FEATURES:

 

Added feature to add current location to a site note

When editing a site note, you will see a new button "HERE" that will fill the prompt with your current location if you have the app's Location Service enabled. If "HERE" is grayed out, the app didn't have your location coordinates at the time you opened the prompt. If you decide you don't want to use the address that pops up, simply cancel the prompt and your previous note will remain in place.

 

Improved diagnostic reports; failed reports will now be saved and can be manually resubmitted from the Send Diagnostics screen

If you try to send diagnostics but your connection (or my server) is unavailable, the report will be saved on your device. It will be attempted again when you send another report, or if you select the "Send Saved" option from the diagnostic report screen. Should be very helpful to those of you who do testing with deactivated devices.

 

Changed provider to indicate if CDMA 1X connection is a Sprint Airave or 800 SMR

This helps make CDMA logs a bit more useful, and brings CDMA logging more in line with how LTE providers are logged.

 

Added donation link to About screen

Those of you who have asked for it, you can now throw me a few extra bucks if you're feeling generous. You will get nothing in return other than knowing you made my day and motivated further development! Thank you!

 

 

BUG FIXES AND LESS-EXCITING STUFF:

  • Added indicators for some Sprint LTE band 25 oDAS cells.
  • Added notification icons for LTE bands outside of North America.
  • Resolved force closes at startup in certain situations.
  • Resolved force closes when requested permissions are not immediately granted on Android 6+.
  • Resolved issue with connection titles overlapping signal meters.
  • Resolved issue with geocoder features not working.
  • Resolved issue with LTE 1900 notification icons missing.
  • Resolved issue with LTE band conflicts between native EARFCN and GCI-calculated band.
  • Resolved issue with LTE frequency title not updating properly in certain situations.
  • Resolved issue with misidentified Sprint LTE band 25 10×10 sites in certain areas.
  • Resolved issue with unreliable CDMA 1X BSL and Site Note displayed in the notification pulldown when a call is in progress.

A *long* overdue update to SignalCheck Lite is finally on the horizon as well, it will bring the free version up to speed with all relevant features and fixes to date.

 

As always, feedback is welcomed and my sincerest thanks to everyone for their support. And to my Beta Crew for being a huge help!

 

-Mike

Mike, found a bug, I'm on the main network but my 1x says I'm on my Airave 3. Would you like a diagnostic? b4ce392af2afd023ad98bf9ca341bfe3.jpg

 

Sent from my SM-G955U using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Excuse my rookie comments here, but after enabling *#73#, it seems that the rainbow sim V2? requires n70 (I turned it off along with n71 - was hoping to track n66) to be available else it switches to T-Mobile.  So this confirms my suspicion that you need to be close to a site to get on Dish.  Have no idea why they don't just use plmn. To test, I put it into a s21 ultra, rebooted twice, came up on T-Mobile (no n70 on s21).  Tried to manually register on 313340, but it did not connect (tried twice). I am on factory unlocked firmware but used a s22 hack to get *#73# working.  Tried what you were suggesting with a T-Mobile sim partially installed, but that was very unstable with Dish ( I think they had figured that one out).  [edit: and now I see Boost sent me a successful device swap notice which says I can now begin to use my new device.  Sigh.  Will try again later and wait for this message - too impatient.]
    • Hopefully this indicates T-Mobile hasn't completely abandoned mmwave and/or small cells? But then again this is the loop, so take that as you will. Hopefully now that most macro activity is done (besides rural colo/builds), they will start working on small cells.   
    • This has been approved.. https://www.cnet.com/tech/mobile/fcc-approves-t-mobiles-deal-to-purchase-mint-mobile/  
    • In the conference call they had two question on additional spectrum. One was the 800 spectrum. They are not certain what will happen, thus have not really put it into their plans either way (sale or no sale). They do have a reserve level. Nationwide 800Mhz is seen as great for new technologies which I presume is IOT or 5g slices.  T-Mobile did not bite on use of their c-band or DOD.  mmWave rapidly approaching deadlines not mentioned at all. FWA brushes on this as it deals with underutilized spectrum on a sector by sector basis.  They are willing to take more money to allow FWA to be mobile (think RV or camping). Unsure if this represents a higher priority, for example, FWA Mobile in RVs in Walmart parking lots working where mobile phones need all the capacity. In terms of FWA capacity, their offload strategy is fiber through joint ventures where T-Mobile does the marketing, sales, and customer support while the fiber company does the network planning and installation.  50%-50% financial split not being consolidated into their books. I think discussion of other spectrum would have diluted the fiber joint venture discussion. They do have a fund which one use is to purchase new spectrum. Sale of the 800Mhz would go into this. It should be noted that they continue to buy 2.5Ghz spectrum from schools etc to replace leases. They will have a conference this fall  to update their overall strategies. Other notes from the call are 75% of the phones on the network are 5g. About 85% of their sites have n41, n25, and n71, 90% 5g.  93% of traffic is on midband.  SA is also adding to their performance advantage, which they figure is still ahead of other carriers by two years. It took two weeks to put the auction 108 spectrum to use at their existing sites. Mention was also made that their site spacing was designed for midrange thus no gaps in n41 coverage, while competitors was designed for lowband thus toggles back and forth for n77 also with its shorter range.  
    • The manual network selection sounds like it isn't always scanning NR, hence Dish not showing up. Your easiest way to force Dish is going to be forcing the phone into NR-only mode (*#*#4636#*#* menu?), since rainbow sims don't support SA on T-Mobile.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...