Jump to content

SignalCheck - Android app to monitor your Wi-Fi/2G/3G/4G LTE/5G-NR signal strengths


mikejeep

Recommended Posts

Hello strangers!!! SURPRISE! I'm not done.. :)

 

I am *way* behind on my e-mail and S4GRU threads, and have not had much time to work on the app over the past several months. But I'm lurking. And have been (slowly) working on an update to include the new API features. As I've privately told a few of you, I'm just crazy busy with other things in life and at work. Everything is great, just not enough time in the day.

 

Looking forward to being as active as I used to be. Sincere apologies for giving anyone the impression that the app was dead and I appreciate your patience. SignalCheck had hit a point of stability where I felt like I could let it simmer for a bit without a huge impact to users. Not because I don't enjoy working on it, just because I was burning the candle at both ends and real life takes priority sometimes. Maintaining the app could probably be a (terrible-paying) full-time job but it's still a fun hobby to me.

 

I'm slowly but surely working through all the e-mails and posts. It's all good!

 

-Mike

 

Mike is the same beta testing group still in existence?

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

I've been meaning to mention that SCP incorrectly identifies B41 small cells here as either B25 (Nexus 5X), or just plain LTE on some of my other devices.

 

 

Screenshot_20161229_164618.png

Screenshot_20161229_163334.png

  • Like 2
Link to comment
Share on other sites

Mike is the same beta testing group still in existence?

 

Yep, everyone that was there is still good to go. I don't expect to change that anytime soon.

 

Quick update on recent progress to reassure everyone.. I have spent many hours over the past few weeks trying to bring SignalCheck up to date by switching to the new Android Studio development environment as well as implementing the new Android permissions model required if you compile for Android 6.0 or higher. I had been skirting both of these mandates by using older software and compiling it for Android 5.0, but obviously there are many new features (yes, I have seen all of your e-messages!) that would be great to add into the app. It has been a far more cumbersome process than I anticipated, and I'm not very comfortable with the new IDE yet. But I'm putting the work in, so stay tuned!

 

-Mike

  • Like 25
Link to comment
Share on other sites

Yep, everyone that was there is still good to go. I don't expect to change that anytime soon.

 

Quick update on recent progress to reassure everyone.. I have spent many hours over the past few weeks trying to bring SignalCheck up to date by switching to the new Android Studio development environment as well as implementing the new Android permissions model required if you compile for Android 6.0 or higher. I had been skirting both of these mandates by using older software and compiling it for Android 5.0, but obviously there are many new features (yes, I have seen all of your e-messages!) that would be great to add into the app. It has been a far more cumbersome process than I anticipated, and I'm not very comfortable with the new IDE yet. But I'm putting the work in, so stay tuned!

 

-Mike

Very excited for this update!

 

Using Tapatalk on Note 8.0

  • Like 7
Link to comment
Share on other sites

  • 2 weeks later...

Mike, I'd like to report a bug that I hope is pretty easy to fix.  When my new AT&T phone is connected to Band 30, the app display works fine, but the notification icon, rather than showing "LTE" without a band number (I remember your explanation about the icons), simply freezes on the last value it had.  See this picture I took of a Band 30 site this morning after using Network Signal Guru to force my phone onto it from Band 2:

 

http://imgur.com/ZNfw55i

 

You can't see from the picture, but all the text in the pull-down menu also freezes on the last value.

 

In lieu of making special "LTE 30" icons for it, just using the generic "LTE" icon would at least fix the display.

 

- Trip

  • Like 3
Link to comment
Share on other sites

Anybody know what this Signal check screen is showing.  A friend sent it to me.  This friend does not know how to get into engineering screens and see what he really has found.  Signal check is not identifying the band.   It is a galaxy S-7 Edge phone.

This is in Tucson, Arizona within a dog park.

Screenshot_20170123-111815-1.jpg

Link to comment
Share on other sites

Anybody know what this Signal check screen is showing. A friend sent it to me. This friend does not know how to get into engineering screens and see what he really has found. Signal check is not identifying the band. It is a galaxy S-7 Edge phone.

This is in Tucson, Arizona within a dog park.

attachicon.gif Screenshot_20170123-111815-1.jpg

10X10 B25 Nokia-A

 

Sent from my Pixel using Tapatalk

  • Like 4
Link to comment
Share on other sites

Will we see this in San Diego?

 

We are observing that areas without B26 tend to get consolation prizes of other bandwidth at sites.  For example Cleveland got second Carrier in a big way before other markets.

  • Like 2
Link to comment
Share on other sites

Probably just coincidence. Didn't San Francisco get a second B25 carrier even though they only own a total of 30 MHz of PCS+G block spectrum?

 

5x5 B25 LTE on the 20 MHz PCS A block allocation. 

Link to comment
Share on other sites

  • 2 weeks later...

More B25 10x10 data for SC.

 

CpKIHvAl.pngGVBaHwZl.pngYJHjfiel.png

Nice to see that you've got 10x10. I'm just curious as to why you're posting these screenshots here instead of in SC related threads, or do they not exist?
  • Like 1
Link to comment
Share on other sites

Nice to see that you've got 10x10. I'm just curious as to why you're posting these screenshots here instead of in SC related threads, or do they not exist?

 

10x10 B25 in San Diego,  it's for Signal Check updates... I hope I am in the correct thread.   ;)

 

fdMn08Fl.png0R1nGSKl.png

  • Like 1
Link to comment
Share on other sites

I see he is reporting earfcn changes so it can be added to signal check. While this is awesome, you can also use the send diagnostic link in signal checks menu so your not cluttering or, as like me personally, getting people excited as there might be a signal check update. Your intentions are great, really, but the same can be done in the app and it gets to Mikejeep quicker. Glad to see more 10x10 popping up though.

 

Sent from my Pixel XL aka LS997

  • Like 3
Link to comment
Share on other sites

I see he is reporting earfcn changes so it can be added to signal check. While this is awesome, you can also use the send diagnostic link in signal checks menu so your not cluttering or, as like me personally, getting people excited as there might be a signal check update. Your intentions are great, really, but the same can be done in the app and it gets to Mikejeep quicker. Glad to see more 10x10 popping up though.

Sent from my Pixel XL aka LS997

A reminder for me as well as I also did the same thing by reporting here that SCP wasn't recognizing a band on our mini-macros and B41 small cells

  • Like 2
Link to comment
Share on other sites

This is for the Signal Check app, not reporting individual counties

 

He used SC instead of SCP like most of us are used to. He is showing how ALU markets are showing a 10x10 second carrier using the 11/12/13 GCI endings and that SCP doesn't know what to do with them yet. Just a friendly reminder for Mike :tu:

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...