Jump to content

Network Vision/LTE - New York City Market


Ace41690

Recommended Posts

You guys love that speedtest app. I could care less what it looked like. They need to make one that uses a very small amount of data and only takes 2 seconds to run.

 

Sent from my little Note2

 

 

  • Like 1
Link to comment
Share on other sites

You guys love that speedtest app. I could care less what it looked like. They need to make one that uses a very small amount of data and only takes 2 seconds to run.

 

Sent from my little Note2

2 seconds doesn't sound like enough time to get an accurate number. I'm always down for UI changes but being able to log into my account is what I really want.

Link to comment
Share on other sites

I just like the new UI more! I'm always up for a UI change as long as the app runs smoother. The current app on Android does not run as well as it did for iOS.

 

The old version did a good job of wasting data for thousands of users that like to measure their....

 

As you folks get older you will come to your senses and quickly realize it doesn't matter what the car looks like but how well does it work.

 

Sent from my little Note2

 

 

Link to comment
Share on other sites

 

The old version did a good job of wasting data for thousands of users that like to measure their....

 

As you folks get older you will come to your senses and quickly realize it doesn't matter what the car looks like but how well does it work.

 

Sent from my little Note2

Okay I think we get you're tired of the app.

 

Sent from my Sprint Galaxy S III using Tapatalk 2

  • Like 1
Link to comment
Share on other sites

Does it matter? First to implement is where it matters to most people.

 

If they announce NYC market, that means they finished converting the whole market. That is quite fast compared to the speed which Sprint is going. That would matter to people. And now t-mobile would be a lot more attractive in NYC.

Link to comment
Share on other sites

 

 

If they announce NYC market, that means they finished converting the whole market. That is quite fast compared to the speed which Sprint is going. That would matter to people. And now t-mobile would be a lot more attractive in NYC.

 

Well , We'll see but Sprint already has a head start it should take a while for T-Mobile to catch up .

  • Like 1
Link to comment
Share on other sites

If they announce NYC market, that means they finished converting the whole market. That is quite fast compared to the speed which Sprint is going. That would matter to people. And now t-mobile would be a lot more attractive in NYC.

 

Press Releases mean nothing.

Link to comment
Share on other sites

If they announce NYC market, that means they finished converting the whole market.

 

No, it does not. Announcing a market does not mean that T-Mobile has "finished converting the whole market." Where in the world did you ever get that idea?

 

AJ

  • Like 1
Link to comment
Share on other sites

If they announce NYC market, that means they finished converting the whole market. That is quite fast compared to the speed which Sprint is going. That would matter to people. And now t-mobile would be a lot more attractive in NYC.

 

Yeah that is not remotely true. Sprint launched chicago at about 60% network vision sites live an about 40% lte live. Just means its widespread enough that most users will be able to experience it somewhere around the city. Means nothing

Link to comment
Share on other sites

http://www.phonearen...-launch_id41138

 

TMobile is going 10×10 after metro pcs merger goes through. What do you guys think

 

What do I think? Wishful thinking. NYC will not see 10 MHz FDD LTE from T-Mobile anytime this year, potentially not anytime next year either.

 

Here are the real facts. T-Mobile holds 30 MHz of AWS spectrum in NYC, while MetroPCS holds 20 MHz. T-Mobile is currently running DC-HSPA+ (20 MHz) and deploying one 5 MHz FDD LTE carrier. That occupies T-Mobile's 30 MHz AWS bandwidth. MetroPCS, meanwhile, is running several CDMA1X carriers (10 MHz) and one 5 MHz FDD LTE carrier. That takes care of MetroPCS's AWS bandwidth.

 

In order to combine T-Mobile and MetroPCS AWS spectrum to deploy 10 MHz FDD LTE, MetroPCS will have to reprogram all devices to use T-Mobile LTE instead of MetroPCS LTE, shut down its own LTE in the AWS C block, push out new PRLs to all subs, and relocate its CDMA1X carriers from the AWS D block to the C block. Only then can T-Mobile extend its bandwidth from 5 MHz FDD LTE to 10 MHz FDD LTE.

 

In other words, it is a mess. Not gonna happen quickly...

 

AJ

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...