Jump to content

Motorola Photon Q 4G LTE


Abyss19707

Recommended Posts

A Sprint Razr Maxx HD with LTE and a dedicated PTT button. Yeah, I'd be all over that

 

Sent from my PG86100 using Tapatalk 2

That would be amazing

 

I think it would be amazing too!

  • Like 1
Link to comment
Share on other sites

Looks like the Motorola Photon Q has hit the FCC with Model XT897.

 

http://www.engadget....oton-q-lte-fcc/

 

FCC Link

https://fjallfoss.fc...%27IHDT56NL2%27

 

Please please please have a keyboard! How hard is it to get sprint to unlock the world phone capabilities for international travel so I can put a SIM in it?

  • Like 1
Link to comment
Share on other sites

A couple interesting tidbits:

 

This device is a Band 25 LTE transceiver, operating between 1850 and 1915 MHz, with

channels of up to 10 MHz in bandwidth.

 

So apparently it can do 10x10 LTE unlike the GSIII, though that will likely be irrelevant for the immediate future.

 

This device also contains functions, and operates within

frequency bands, that are not authorized within the United

States or its territories.

 

And how nice, it looks like this will be a true successor to the Photon with world phone capabilities and all. :tu:

  • Like 1
Link to comment
Share on other sites

Please please please have a keyboard! How hard is it to get sprint to unlock the world phone capabilities for international travel so I can put a SIM in it?

 

Outside of the iPhone, I thought that Sprint world phones came SIM unlocked for international use.

Link to comment
Share on other sites

A couple interesting tidbits:

 

This device is a Band 25 LTE transceiver, operating between 1850 and 1915 MHz, with

channels of up to 10 MHz in bandwidth.

 

So apparently it can do 10x10 LTE unlike the GSIII, though that will likely be irrelevant for the immediate future.

 

I still don't understand why the SGS3 is the only phone that only has 5 MHz bandwidths for LTE. I believe the rest of the LTE phones so far can support 5 and 10 MHz bandwidths. They should have included 10 MHz bandwidths for longevity purposes.

Link to comment
Share on other sites

Outside of the iPhone, I thought that Sprint world phones came SIM unlocked for international use.

 

Oh honestly I dont know. I have read the pains of the world phone iphone features I had just assumed it was the same now. Good to hear. I think I will be all over this if it has a keyboard. Although my Epic works perfect now....grrr...

Link to comment
Share on other sites

I still don't understand why the SGS3 is the only phone that only has 5 MHz bandwidths for LTE. I believe the rest of the LTE phones so far can support 5 and 10 MHz bandwidths. They should have included 10 MHz bandwidths for longevity purposes.

 

Possibly. However, Sprint has no active plans for 10MHz channels. So, even if they change their plan tomorrow to start including a track toward 10MHz deployments, it would still take 18 to 24 months in order to start getting some 10MHz carriers in place. And then they would only be in a hand full of markets where they have a large enough PCS contiguous chunk available. It's not many, and maybe not any. Natural 10MHz deployments are not likely to happen in the contract lifespan of any of these new LTE devices.

 

Sprint is much more likely to deploy 10MHz LTE via Carrier Aggregation first. And none of these devices support CA. I think it is completely a non issue, :imo:

 

Robert

Link to comment
Share on other sites

I wish there were more details on the device like the screen size, RAM, processor, flash storage, etc

 

I am hoping for a 4.7 in screen, 1 or 1.5 GB RAM, Qualcomm S4 8960, 16 and 32 GB storage, NFC, BT 4.0, ICS 4.0.4 (upgradable to JB in the future), 2500 maH battery, microSD card slot, etc.

Link to comment
Share on other sites

I wish there were more details on the device like the screen size' date=' RAM, processor, flash storage, etc

 

I am hoping for a 4.7 in screen, 1 or 1.5 GB RAM, Qualcomm S4 8960, 16 and 32 GB storage, NFC, BT 4.0, ICS 4.0.4 (upgradable to JB in the future), 2500 maH battery, microSD card slot, etc.[/quote']

 

That's all?

 

Sent from my Jelly Bean Toro using Forum Runner

  • Like 1
Link to comment
Share on other sites

Is that too much? Sounds like a GSIII with Motorola stamped on the back. :)

 

Nah, I think that's probably pretty close to what we will see. It just struck me as funny to lay everything out like that.

Link to comment
Share on other sites

Nah, I think that's probably pretty close to what we will see. It just struck me as funny to lay everything out like that.

 

If its a qwerty slider like some are speculating, I can't imagine the screen being that large. It would make for a very difficult device to hold.

Link to comment
Share on other sites

Nah, I think that's probably pretty close to what we will see. It just struck me as funny to lay everything out like that.

 

HAHAHAHA...I did put etc. I don't how much more you want me to bring it down by. You want me to listen the dimensions, WxHxD?

Link to comment
Share on other sites

My technical rundown of the presumed Photon Q's FCC filing just went live on The Wall.

 

http://s4gru.com/index.php?/blog/1/entry-294-fire-photon-torpedoes-motorola-photon-q-hits-the-fcc-oet/

 

AJ

  • Like 2
Link to comment
Share on other sites

It would be cool to have a Moto slider slab, but from Sprint's perspective an LTE Admiral might be a better idea, since at that point they can point to a flagship phone with both LTE and PTT. In markets where LTE is live, that combination is sure to be a hit with business types.

 

Sent from my Galaxy SIII-32GB using Forum Runner

  • Like 1
Link to comment
Share on other sites

I couldn't find any mention of the antenna rating in the FCC filings, I presume you didn't find one as well.

 

Antenna gain? If so, no, not in this filing. Some authorizations include it, but many do not. The proof is in the pudding, so the FCC cares about conducted power and radiated power. As long as the device stays within those power restrictions, the antenna gain can be anything.

 

AJ

Link to comment
Share on other sites

  • 4 weeks later...

Here are the official details.

 

 

Full press release:

 

http://newsroom.spri...article_id=2342

 

Fact sheet:

 

http://newsroom.spri...tefactsheet.htm

 

A few specs:

 

· 1.5 GHz dual-core processor for quick downloads and app performance

· Five-row, slide-out QWERTY keyboard with large 4.3-inch ColorBoost™ display

· Built with Android 4.0.4, Ice Cream Sandwich

· Enterprise Security

· 3G/4G LTE Mobile Hotspot capability for up to eight Wi-Fi enabled devices (additional fee required;

· 8GB of on board memory, support for up to 32GB SD Card, for a total of up to 40GB

· Frequency: LTE, CDMA 800/1900 EVDO Rev A, World Phone - GSM 850/1900/1800/900, UMTS 850/1900/2100 (SIM is embedded in the phone, GSM SIM is locked and not removable)

Link to comment
Share on other sites

· Frequency: LTE, CDMA 800/1900 EVDO Rev A, World Phone - GSM 850/1900/1800/900, UMTS 850/1900/2100 (SIM is embedded in the phone, GSM SIM is locked and not removable)

 

I really want this phone. When it says the GSM SIM is locked and not removable, how can one travel overseas and buy a local SIM, i thought this was the idea of a world phone?

Link to comment
Share on other sites

I really want this phone. When it says the GSM SIM is locked and not removable, how can one travel overseas and buy a local SIM, i thought this was the idea of a world phone?

 

One cannot use a local SIM.

 

A "world phone" has a rather loose definition, meaning that a phone supports at least one band/airlink combination that allows it to roam in another country.

 

AJ

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...