Jump to content

LG G2 Users Thread!


koiulpoi

Recommended Posts

Did your install finish?  If so do you have any first impressions?  If you are in an area with LTE, any RF performance differences?

 

Seems snappier, Knock on/off is quicker to respond.  Have to drive toward a 4G at lunch to see if anything is better.

  • Like 1
Link to comment
Share on other sites

Are the there any chances of bricking my phone if I do the direct download and install that way? Also can we see if anybody else can't do the lte mode only also?

Link to comment
Share on other sites

Yeah, this direct download is a new thing for non-rooted phones????

 

No, ADB sideloading (as it's called) has been around in Android for years.

 

Are the there any chances of bricking my phone if I do the direct download and install that way? Also can we see if anybody else can't do the lte mode only also?

 

Not any greater chance than installing the OTA.  The direct download link I posted on XDA is the exact file your phone would (eventually) download and install on its own.

 

Also, just keep in mind that if you install the update (either by sideloading or once your phone gets the update on its own), you may lose the ability to root your phone for some period of time (ie until a dev figures out a workaround).  So if root is critical to you, you may want to wait until the devs come up with a rooted ZVC firmware you can use.

  • Like 1
Link to comment
Share on other sites

No, ADB sideloading (as it's called) has been around in Android for years.

 

 

Not any greater chance than installing the OTA.  The direct download link I posted on XDA is the exact file your phone would (eventually) download and install on its own.

 

Also, just keep in mind that if you install the update (either by sideloading or once your phone gets the update on its own), you may lose the ability to root your phone for some period of time (ie until a dev figures out a workaround).  So if root is critical to you, you may want to wait until the devs come up with a rooted ZVC firmware you can use.

 

I don't have my phone rooted. So is it as simple as downloading then clicking install? Never been into rooting so that is why I'm asking is there anything else I have to do other then downloading the zip file.

Link to comment
Share on other sites

So I am having some really big issues trying to boot into recovery so I can sideload this thing.  It worked for me before...  Anyone recommend any tips?  Vol- Down + Power button till LG screens appears then let go and do the same right?

Link to comment
Share on other sites

After KitKat installed, I can not put my phone in "LTE Only"

 

5689#*980# was the previous way I did so.

Which option is it under on that menu, i cant find it, im on the pre kitkat update.

 

Edit: nevermind I accidentally skipped over the menu

Link to comment
Share on other sites

No, ADB sideloading (as it's called) has been around in Android for years.

 

 

Not any greater chance than installing the OTA.  The direct download link I posted on XDA is the exact file your phone would (eventually) download and install on its own.

 

Also, just keep in mind that if you install the update (either by sideloading or once your phone gets the update on its own), you may lose the ability to root your phone for some period of time (ie until a dev figures out a workaround).  So if root is critical to you, you may want to wait until the devs come up with a rooted ZVC firmware you can use.

 

 

Okay I'm new to this sideloading so could you please layout the steps to complete the update in it's entirety.

 

Thanks! :(

Link to comment
Share on other sites

Okay I'm new to this sideloading so could you please layout the steps to complete the update in it's entirety.

 

Thanks! :(

The XDA threads 99.9% of the time have a step by step guide in the OP.

 

Sent from my Nexus 5 using Tapatalk

 

 

Link to comment
Share on other sites

The XDA threads 99.9% of the time have a step by step guide in the OP.

 

Sent from my Nexus 5 using Tapatalk

 

Would you happen to have a link for that???

Link to comment
Share on other sites

Would you happen to have a link for that???

 

If you do a Google search for "adb sideload tutorial" you can find some guides.  Generally speaking, you need to do the following: 1) get the Android debugger (ADB) executable (you can get this from the ioroot rooting tool). 2) install the LG G2 drivers from LG's web site (I believe the TMobile one works since there isn't/wasn't a Sprint-specific driver posted).  3) reboot your phone into recovery mode (you can either use ADB to do this or hold in certain keys while powering on the phone - I'm not 100% sure which they are); 4) run adb.exe from the command line

 

I think at least 2 people on XDA reported that their phone is now in a boot loop after trying to install the update, so you may want to hold off installing until more people have reported back (I myself have not installed it yet).

  • Like 1
Link to comment
Share on other sites

If you do a Google search for "adb sideload tutorial" you can find some guides.  Generally speaking, you need to do the following: 1) get the Android debugger (ADB) executable (you can get this from the ioroot rooting tool). 2) install the LG G2 drivers from LG's web site (I believe the TMobile one works since there isn't/wasn't a Sprint-specific driver posted).  3) reboot your phone into recovery mode (you can either use ADB to do this or hold in certain keys while powering on the phone - I'm not 100% sure which they are); 4) run adb.exe from the command line

 

I think at least 2 people on XDA reported that their phone is now in a boot loop after trying to install the update, so you may want to hold off installing until more people have reported back (I myself have not installed it yet).

 

 

Okay great got it and I'll take your advice to hold off....

Link to comment
Share on other sites

Force stopped Google services framework and deleted data twice, then quickly checked for manual update and got it!!!!! Amen. Would've ruined my productivity this afternoon.

 

Edit: Or just coincidence or small window that update worked. 

Link to comment
Share on other sites

Would you happen to have a link for that???

Here's a generic guide I had for when the n5 finally gets its update. Its the same basic steps.

http://www.androidbeat.com/2013/12/manually-install-android-4-4-2-kitkat-update-nexus-4-nexus-5-nexus-7/

 

 

Sent from my Nexus 5 using Tapatalk

 

 

  • Like 1
Link to comment
Share on other sites

Just a note for the adventurous and impatient type, do not try to adb side load the update. I downloaded the update zip from the google servers and then side loaded it in stock recovery and even on a stock unrooted ZVA build it bricked my phone. This happened to quite a few people apparently and luckily I can restore back to ZV7 when I get a chance. My data was all replaceable on my phone so it's not a big deal but just be patient!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...