Jump to content

LG G2 Users Thread!


koiulpoi

Recommended Posts

The crackling voice quality is fixed in ZV8.

I have read that the crackling voice is fixed in ZV8 on these threads.  I'm patiently waiting for my ZV8 to come along (This is why I don't play games of chance - I'm always a donator not a receiver). 

 

I can build a computer, and I have no problem whatsoever repairing Inductively Coupled Plasma Atomic Emission Spectrometers at work, but I'm afraid to root or install the updates to my phone.  I'm afraid I'll "brick" it!  Go figure...

  • Like 1
Link to comment
Share on other sites

I have read that the crackling voice is fixed in ZV8 on these threads.  I'm patiently waiting for my ZV8 to come along (This is why I don't play games of chance - I'm always a donator not a receiver). 

 

I can build a computer, and I have no problem whatsoever repairing Inductively Coupled Plasma Atomic Emission Spectrometers at work, but I'm afraid to root or install the updates to my phone.  I'm afraid I'll "brick" it!  Go figure...

 

Uhhhhh...I am a bit confused on the context of your post.  I was just merely saying that the ZV8 firmware fixes the crackling voice.  I don't get how the conversation turned into advocated for a root/brick fest on your phone?  Don't worry the ZV8 firmware will come.

Link to comment
Share on other sites

I use the Wanam Kit for 4.4.

 

Yes Wanam Kit is fine for Nexus 5 because that uses stock Android just like how this Xposed module could be used for CM/AOSP and the description say sits for Nexus 5 4.4+ stock Android ROMs. 

 

However I assume Jonathanm1978 uses the G2 with LG stock rom.  In this case the Quickboot app is a much better option if you need a quick reboot and recovery option instead of looking around and installing random modules just to find this one feature that he needs.  I personally use the Quickboot app to launch into TWRP recovery and works great.  I love the G2 Xposed module because it has features that are specific to the G2 that the Wanam Kit wouldn't provide.  Besides we are using the 4.2.2

Link to comment
Share on other sites

Uhhhhh...I am a bit confused on the context of your post.  I was just merely saying that the ZV8 firmware fixes the crackling voice.  I don't get how the conversation turned into advocated for a root/brick fest on your phone?  Don't worry the ZV8 firmware will come.

Sorry to confuse you.  All I meant was that I wish I knew how to load the ZV8 update myself NOW instead of having to wait for it.  My phone is one of the cracklers  I'd be afraid to try and load it like you and the other experts on this forum can so easily do. 

Link to comment
Share on other sites

Sorry to confuse you.  All I meant was that I wish I knew how to load the ZV8 update myself NOW instead of having to wait for it.  My phone is one of the cracklers  I'd be afraid to try and load it like you and the other experts on this forum can so easily do. 

 

If you are not rooted, you don't have to worry about these other methods since you

These other methods involve flashing the ZV8 update using TWRP recovery since they don't want to have to flash back to stock firmware and redo settings just to take the OTA.  I personally updated to ZV8 using these other methods via flashing a zip file in TWRP recovery so I don't have to flash back to stock firmware since it will take a lot of time and effort to redo everything.

 

If you are rooted, it is not advised to take the OTA update since it may cause issues when the stock OTA update tries to install on something that is rooted.  It is advised to flash back to stock firmware and be unrooted as if its a brand new phone and then take the OTA update.  But at the same time this is why people on this thread and on XDA are looking for ways to flash the new ZV8 firmware update without needing to flash back to stock firmware to save time.

Link to comment
Share on other sites

Wondering...

Can current G2 owners who also used an HTC EVO4GLTE compare RF numbers. It's my understanding to expect better numbers from the G2, was curious as to how much better.

 

Thanks

 

Um.... yeah, the EVO LTE is a dog of dogs when it comes to RF performance... the worst name for a device that had such troubles with LTE. Lol

 

I did have EVO LTE and my wife currently uses a EVO LTE and side by side, my HTC One and the LTE, One was much better than the EVO LTE and my G2 is even better (in my comparisons) than the One. 

 

I don't know why or what device people came from (maybe they had Note 2's or something) that the G2 isn't performing up to standards but real world, the G2 has been great and definitely a HUGE step up from the EVO LTE. 

  • Like 1
Link to comment
Share on other sites

Yes Wanam Kit is fine for Nexus 5 because that uses stock Android just like how this Xposed module could be used for CM/AOSP and the description say sits for Nexus 5 4.4+ stock Android ROMs.

 

However I assume Jonathanm1978 uses the G2 with LG stock rom. In this case the Quickboot app is a much better option if you need a quick reboot and recovery option instead of looking around and installing random modules just to find this one feature that he needs. I personally use the Quickboot app to launch into TWRP recovery and works great. I love the G2 Xposed module because it has features that are specific to the G2 that the Wanam Kit wouldn't provide. Besides we are using the 4.2.2

Think you were confused on my initial post. Oh well.. Carry on.

Link to comment
Share on other sites

I'm not rooted at all, so hardware is the only way I can do anything right now.

 

By the way, the G2 has a fresh PRL, from 55016 to 60657.

I'm not sure, but if I remember right, the iPhone PRL matches this doesn't it? Wasn't 55016 the PRL iPhone had also?

 

Sent from my LG-LS980 (G2) using Tapatalk

 

 

Link to comment
Share on other sites

I'm not rooted at all, so hardware is the only way I can do anything right now.

 

By the way, the G2 has a fresh PRL, from 55016 to 60657.

I'm not sure, but if I remember right, the iPhone PRL matches this doesn't it? Wasn't 55016 the PRL iPhone had also?

 

Sent from my LG-LS980 (G2) using Tapatalk

Current (from what I have seen today) is 55017. You saying you got that 60657 today? I got 55017 today.

 

EDIT! Just updated my buddies phone, who has the software update on his G2 and yes, I see, PRL just went from 55016 to 60657. Interestingly enough, I do not have the software update yet and no amounts of PRL updates will bump me up past 55017.

 

Sent from my LG-LS980 using Tapatalk

Link to comment
Share on other sites

Current (from what I have seen today) is 55017. You saying you got that 60657 today? I got 55017 today.

 

EDIT! Just updated my buddies phone, who has the software update on his G2 and yes, I see, PRL just went from 55016 to 60657. Interestingly enough, I do not have the software update yet and no amounts of PRL updates will bump me up past 55017.

 

Sent from my LG-LS980 using Tapatalk

I have the new one as well. My G2 had been hanging on to signals as low as -122

 

Sent from my LG-LS980 using Tapatalk

 

 

  • Like 1
Link to comment
Share on other sites

I have the new one as well. My G2 had been hanging on to signals as low as -122

 

Sent from my LG-LS980 using Tapatalk

Are you on updated or original software and are you saying it "no longer" holds on to signals that long after PRL update?

 

55017 on my end.

 

Sent from my LG-LS980 using Tapatalk

Are you on updated or original software?

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Are you on updated or original software and are you saying it "no longer" holds on to signals that long after PRL update?

 

 

Are you on updated or original software?

 

Sent from my LG-LS980 using Tapatalk

I don't have zv8. My signal seems stronger but that could be me.

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Software on the phone doesn't drive the PRL version. It's based on the device type and account type combination. 55017 is what residential account LTE world phones get.

So why do I have the new one? Maybe I don't understand it.

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

So why do I have the new one? Maybe I don't understand it.

 

Sent from my LG-LS980 using Tapatalk

No idea. Someone needs to pull it with QPST. It's easy on that phone. Put it in diag mode and hit read. That rl0 file is the PRL. Send it to me.

Link to comment
Share on other sites

I was rooted when I tried the update...twice...and no go. I force "side loaded" the update after downloading and it loaded successfully, however, I was "Un-Rooted" again. I just had to run the ioroot again and all was good in the world....

Link to comment
Share on other sites

So I just got to work and sure as hell could not connect to lte with the 60657 prl. Had update it to the 55016.

 

Sent from my LG-LS980 using Tapatalk

 

Were you able to pull this 60657?  I hope someone can send me a copy so I can make some contacts with proof in hand.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...