Jump to content

Clearwire receives unsolicited offer from DISH


JohnHovah

Recommended Posts

Yes, but you have 800Mhz panels, 1900Mhz panels, 2500/2600MHz already, plus the RRU's for each. Yes S band and 2600MHz can share, but will be not be optimal for either.

 

The 800 and 1900 MHz frequencies are on the same panel with two antennas on 1900 MHz and one antenna on 800 MHz inside the panel.

Link to comment
Share on other sites

The 800/ESMR and 1900 antennas are both in the same panel housing with NV inside the new, center-mounted panel. Even though there are physically multiple antennas inside (three total, two for 1900 carriers and one for ESMR, is pretty common, but other configurations are possible depending on how many 1900 carriers are in use in the market), it just looks like one. (The old panels, typically mounted on the ends of the rack, are no longer powered and will eventually be removed.) There's no reason why the vendors can't build S-band and 2500/2600 panels into the same housing either.

 

Having said that Sprint is probably going to tell Dish to go pound sand on any co-hosting agreement after Charlie's throwing a (small) wrench in the Clear merger. The only thing Dish may have going for them at this point is a bunch of empty Nextel racks that tower owners will want tenants for in the next 2-3 years (and Sprint may strategically decide to keep leasing many of them either to expand the native footprint or just to keep them out of Dish's and T-Mobile's hands).

 

Yeah, I forgot about the fact that you can combine the antennas into one panel.

 

I still think that Sprint should just get back it's BRS spectrum and then sell the rest of Clearwire (leased spectrum+network) to Dish. Of course that should include debt. That may quell any cries that Sprint is a spectrum hog, plus it unloads leases to Dish. Of course Charlie Ergen is not stupid and may just elect to sell his spectrum instead.

Edited by bigsnake49
Link to comment
Share on other sites

Yeah, I forgot about the fact that you can combine the antennas into one panel.

 

I still think that Sprint should just get back it's BRS spectrum and then sell the rest of Clearwire (leased spectrum+network) to Dish. Of course that should include debt. That may quell any cries that Sprint is a spectrum hog, plus it unloads leases to Dish. Of course Charlie Ergen is not stupid and may just elect to sell his spectrum instead.

 

He'd be pretty stupid if he took that deal. But I like it!

  • Like 1
Link to comment
Share on other sites

I still think that Sprint should just get back it's BRS spectrum and then sell the rest of Clearwire (leased spectrum+network) to Dish.

 

Are you still okay with that deal even though Sprint controls less than the maximum 55.5 MHz attributable BRS in many markets?

 

AJ

Link to comment
Share on other sites

Are you still okay with that deal even though Sprint controls less than the maximum 55.5 MHz attributable BRS in many markets?

 

AJ

 

I would like to see where they are deficient and where can they obtain the rest.

Link to comment
Share on other sites

 

I would like to see where they are deficient and where can they obtain the rest.

 

Couldn't agree more and if they are close in almost all of the top markets, then yes, I think the brs is sufficient and they can re lease the ebs of they need to in 5 to 10 years when this debacle is over with.

 

Sent from phone

  • Like 1
Link to comment
Share on other sites

So does this mean that the Dish deal is void? I remember that Clearwire could not get funding from Sprint as a stipulation of the offer.

 

I don't know about void, but we'll see how serious DISH is about a deal now.

Link to comment
Share on other sites

I don't think they will stop pursuing Clearwire....

 

Has anyone checked to see if Charlie Ergen is made of liquid metal?

 

http://www.youtube.com/watch?v=u0JMVal0cdY

 

AJ

  • Like 2
Link to comment
Share on other sites

Nope.. If he is any kind of terminator he is more than likely this one (take that as you will)

 

 

Are you saying that Ergen has gynecomastia?

 

AJ

Link to comment
Share on other sites

Are you saying that Ergen has gynecomastia?

 

AJ

 

More aptly, his posturing and complaints are about as pointless as inflatable tits on an evil terminator

  • Like 1
Link to comment
Share on other sites

Clearwire borrows $80 million from Sprint, dish will probably withdraw offer.

 

http://www.engadget....ws-sprint-cash/

 

I am going to lose sleep tonight over the photo in your link. As if I could spare any sleep:

 

twilightclearwiregood-1361976889.jpg

  • Like 3
Link to comment
Share on other sites

twilightclearwiregood-1361976889.jpg

 

Dan and Erik sitting in a tree, K-I-S-S-I-N-G....

 

AJ

  • Like 2
Link to comment
Share on other sites

It seems Clear has drawn some funding

 

[excerpt]

Clearwire has not decided if it will take more than one month of payments, though it has already lost the right to draw on the January and February installments, according to a statement. It added that it was still in talks with Dish over its $3.30 counterbid. However, the acceptance of the March funding, in the form of exchangeable notes (which Sprint can convert into Clearwire stock at $1.50 each under certain conditions) seems a clear signal, and also increases the carrier's shareholding.

 

 

 

http://www.rethink-wireless.com/article.asp?article_id=24636

  • Like 2
Link to comment
Share on other sites

I am curious for those that are familiar with the situation...at what point does Clearwire need to make a decision on whether they will accept a Sprint or Dish deal? I know that Clearwire has started tapping into Sprint funding which I thought Sprint had put a condition in the merger agreement that if Clearwire ever accepted any funding it could NOT consider any other transaction but that doesn't seem to be case. Does Dish still even have a chance of a Clearwire deal given this condition? It appears from reading articles about Clearwire that they stated that they are still mulling over the Dish deal which doesn't make sense to me.

 

I just want Clearwire to make a darn decision already so that the whole Sprint/Softbank/Clearwire transaction can be analyzed by the FCC and DOJ. Doesn't Clearwire have a deadline to make such a decision. I don't believe Clearwire can drag on this saga forever. Clearwire needs to quickly decide on who they want to be bought out by so that they can move on and start building their TD-LTE network.

Link to comment
Share on other sites

I believe Sprint is not in a hurry; they have time on their side. According to the quotes below, the longer it takes the more likely sprint is to getting Clearwire. Also the clearwire board supports the sprint offer, they are just doing their due diligences.

 

. The $80 million draw could result in the issuance of 50 million shares which would dilute investors by 3.5% if the deal was voted down.

http://www.forbes.com/sites/ericsavitz/2013/02/27/clearwire-nabs-80m-from-sprint-still-mulling-dish-bid/

 

Sprint still needs 75% approval and to date seems to have secured ~64% of voting stock. CLWR’s minority shareholders may be able to block the S-CLWR transaction, but only until the Sprint’s standstill agreement ends on November 28, 1013. After that date, Sprint would only need 66 2/3% vote to change CLWR’s bylaws, and could probably accumulate additional stock in the open market, as well as change CLWR’s by-laws so that it did not need 75% approval for a change of control.

 

http://blogs.barrons.com/techtraderdaily/2013/02/04/clwr-davidson-cuts-to-hold-sprint-likely-to-prevail/

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...