Jump to content

Sprint LTE Coverage Maps via Sensorly


Recommended Posts

 

...

 

I really need a new phone so I can use sensorly myself, but I know the day after I get one they'll announce the first 800 LTE phone.

 

Then I'm sure there are lots of folks on here that would like you to get a new phone as soon as possible. :D

 

 

  • Like 2
Link to comment
Share on other sites

After a month of not being able to get sensorly to take my updates, it now works.

 

For the third time I drove n/s through st. Francis, MN and Princeton, and it updated quickly.

 

I'm posting this mainly because I know a couple others are still having problems and I wanted to mention that prior to this I was on a custom rom (freegs3) and kernel. I wiped and reinstalled a few times to no avail, but when I went back to stock (rooted) it worked.

 

So I'm not sure if the fix was the rom or the sensorly server side fix, but thought I'd share.

 

Sent from my SPH-L710 using Tapatalk 2

 

 

  • Like 1
Link to comment
Share on other sites

There's your problem right there. Another member I know of used the FreeGS3 thing too. That dev decided to get cute and change up stuff in the ROM so it would report to Sensorly that you were not on Sprint's network. All your points go into the lala land... which not any fault of Sensorly.

Link to comment
Share on other sites

Will there be any way for us to tell the upcoming bands apart from one another? It would be very interesting to be able to map 800/1900/2600 and have a mapping function with the bands combined and separate.

 

 

 

Also, I cannot seem to get the speedtest function to report to sensorly. I can run speedtests and they complete but my contribution lists 1 Billion measurements and 0 speedtests no matter what I try in terms of uploading the data.

Link to comment
Share on other sites

Sensorly definitely does not use much data. And it is true that you can WiFi upload all of the observations. However, this is typically not known except to more advanced users. I believe that people that have capped data plans are just self taught to save their data for only needed uses when mobile. And to a casual Verizon or AT&T customer, a use like Sensorly would seem superfluous.

 

I believe that also half, or more, of Sprint LTE mapping on Sensorly comes from members of this forum.

 

Robert via Nexus 7 with Tapatalk HD

  • Like 4
Link to comment
Share on other sites

Sensorly is updating FAST these days! Just mapped a few other areas today and it seems with in 20 minutes(maybe earlier but didn't get a chance to check) its on the map and even all the layers too. Loving the update!!! :) :) :)

  • Like 2
Link to comment
Share on other sites

Still in the airport at the moment awaiting A friends flight that arrived an hour later than mine. Its hit or miss in the terminal though l Brought my spare batteries so I will be mapping the entire trip until friday

  • Like 1
Link to comment
Share on other sites

Yeah airport tower is not active yet. Downtown is great. Elsewhere is hit or miss. Highways are covered for the most part. Report in on sf market thread as well.

 

Sent from my cm_tenderloin using Tapatalk HD

Link to comment
Share on other sites

I'm really surprised how well the city I am in is getting LTE. I drove over to my mothers house this morning and picked up LTE inside her house for a few minutes. I'm not sure if someone else already mapped in that area, since there are tennis courts behind her house, or if Sensorly already updated the maps. I think I'm going to do some driving tonight around town to see if LTE is anywhere else. The main areas that show LTE on Sensorly are areas I frequently drive, so I'll have to drive around some.

  • Like 1
Link to comment
Share on other sites

If you still don't see your data now, it's quite possible yes. In which case, send an email to contact@sen... with your phone's anonymous id. Clear your browser cache before testing.

 

Any guess as to where the data went? Sent in the phone ID. My phone is not rooted, so there shouldn't have been an issue with it reporting under the wrong network name.

Link to comment
Share on other sites

I'm really surprised how well the city I am in is getting LTE. I drove over to my mothers house this morning and picked up LTE inside her house for a few minutes. I'm not sure if someone else already mapped in that area, since there are tennis courts behind her house, or if Sensorly already updated the maps. I think I'm going to do some driving tonight around town to see if LTE is anywhere else. The main areas that show LTE on Sensorly are areas I frequently drive, so I'll have to drive around some.

Do you have a LTE capable phone? Your signature says you still have a EVO 3D Wimax phone.

Link to comment
Share on other sites

Just did a little mapping on US Hwy 101 from Seaside, OR, to Warrenton, OR. Finally, some purple on the Oregon coast! :D

 

EDIT: Also went up to Astoria and across the bridge into Washington. LTE finally cut out around Fort Columbia State Park.

  • Like 2
Link to comment
Share on other sites

I'm starting to see blips of LTE in southern Wisconsin. I caught my phone going to 4G on Milton Ave. in Janesville yesterday. It stayed up as long as I was on Milton, but once headed out of town it dropped back to 3G. I live fairly close to Milton, but I couldn't get the phone to reconnect to LTE later on.

 

Around Oregon I saw it flip over to 4G again, but about a minute later would fall back to 3G. If I switched mobile data off, then on again, it'd reconnect to LTE, then fall back after a couple minutes.

  • Like 1
Link to comment
Share on other sites

To the sensorly rep:

 

Ever since the new Jelly Bean update on the Motorola Photon Q, the mapping functionality (note, *not* the app itself) keeps 'crashing' of a sort....basically, the process seems to halt/hang or something.  On an active mapping process, the spinning circle to the left of the 'elapsed time' timer will continue to spin, but the timer itself will suddenly flip to all zeroes and points cease accumulating regardless of whether you're mapping 2G/3G CMDA signal or 4G/LTE signal. Passive mapping processes will similarly 'crash' and the notifier/status bar icon at the top disappears when this happens (I have mine set to always scan passively anyway when vehicle docked)..  

 

And as one other additional oddity, I went into my app settings after I got home this afternoon and noticed that oddly, it shows 'Battery usage today' reporting at 1272% (no, that's not a typo, it literally shows 1272% right now).  I'm not sure if that is interrelated or not, but I know its downright impossible.  I had even uninstalled/reinstalled the app a few days ago, and even if that value wasn't being reset daily, I haven't used even half that much of a cumulative battery charge over the last few days since then.

 

There's a thread on this here where others with the P-Q are experiencing the same issue:

 

http://s4gru.com/index.php?/topic/3748-sensorly-freezing-on-my-photonq/

  • Like 3
Link to comment
Share on other sites

There is one small blip of 4g in Dover,Delaware is that tower live or just testing.

 

It's just testing, as it has not been accepted yet. But probably will be soon.

 

Robert via Nexus 7 using Tapatalk 4 Beta

 

 

  • Like 1
Link to comment
Share on other sites

I keep seeing the at&t commercials saying that they are "The nation's largest 4G Network" but from the maps on sensorly is does not look that way. Verizon looks over twice as big and from what sprint has in the same areas as at&t sprint takes the cake. I'm i missing something here?

 

 

 

 

 
  • Like 1
Link to comment
Share on other sites

 

I keep seeing the at&t commercials saying that they are "The nation's largest 4G Network" but from the maps on sensorly is does not look that way. Verizon looks over twice as big and from what sprint has in the same areas as at&t sprint takes the cake. I'm i missing something here?

They count their HSPA+ network as 4G. 

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • So, in summary, here are the options I tested: T-Mobile intl roaming - LTE on SoftBank, routes back to the US (~220ms to 4.2.2.4) IIJ physical SIM - LTE on NTT, local routing Airalo - LTE on SoftBank and KDDI (seems to prefer SoftBank), routed through Singapore (SingTel) Ubigi - 5G on NTT, routed through Singapore (Transatel) US Mobile East Asia roaming - 5G on SoftBank, routed through Singapore (Club SIM) Saily - 5G on NTT, routed through Hong Kong (Truphone)...seems to be poorer routing my1010 - LTE on SoftBank and KDDI (seems to prefer KDDI), routed through Taiwan (Chunghwa Telecom) I wouldn't buy up on the T-Mobile international roaming, but it's a solid fallback. If you have the US Mobile roaming eSIM that's a great option. Otherwise Ubigi, Airalo, or my1010 are all solid options, so get whatever's cheapest. I wouldn't bother trying to find a physical SIM from IIJ...the Japanese IP is nice but there's enough WiFi that you can get a Japanese IP enough for whatever you need, and eSIM flexibility is great (IIJ as eSIM but seems a bit more involved to get it to work).
    • So, the rural part of the journey still has cell service for nearly all the way, usually on B18/19/8 (depending on whether we're talking about KDDI/NTT/SoftBank). I think I saw a bit of B28 and even n28 early on in the trip, though that faded out after a bit. Once we got to where we were going though, KDDI had enough B41 to pull 150+ Mbps, while NTT and SoftBank had B1/B3 IIRC. Cell service was likewise generally fine from Kawaguchiko Station to Tokyo on the express bus to Shinjuku Station, though there were some cases where only low-band LTE was available and capacity seemed to struggle. I also figured out what I was seeing with SoftBank on 40 MHz vs. 100 MHz n77: the 40 MHz blocks are actually inside the n78 band class, but SoftBank advertises them as n77, probably to facilitate NR CA. My phone likely preferred the 40 MHz slices as they're *much* lower-frequency, ~3.4 GHz rather than ~3.9, though of course I did see the 100 MHz slice being used rather often. By contrast, when I got NR on NTT it was either n28 10x10 or, more often, 100 MHz n78. As usual, EMEA bands on my S24 don't CA, so any data speeds I saw were the result of either one LTE carrier or one LTE carrier plus one NR carrier...except for B41 LTE. KDDI seems to have more B41 bandwidth live at this point, so my1010 or Airalo works well for this, and honestly while SoftBank and NTT 5G (in descending order of availability) have 5G that's readily available it may be diminishing returns, particularly given that I still don't know how to, as someone not from Hong Kong, get an eSIM that runs on SoftBank 5G that isn't the USM "comes for free with the unlimited premium package" roaming eSIM (NTT is easy enough thanks to Ubigi). In other news, I was able to borrow someone's Rakuten eSIM and...got LTE with it. 40 Mbps down, 20 Mbps up, 40ms latency to Tokyo while in Tokyo...which isn't any worse than the Japan-based physical SIMs I had used earlier. But not getting n77 or n257 was disappointing, though I had to test the eSIM from one spot rather than bouncing around the city to find somewhere with better reception. It's currently impossible to get a SIM as a foreigner that runs on Rakuten, so that was the best I could do. Also, I know my phone doesn't have all the LTE and 5G bands needed to take full advantage of Japanese networks. My S24 is missing: B21 (1500 MHz) - NTT B11 (1500 MHz) - KDDI, SoftBank B42 (3500 MHz) - NTT, KDDI, SoftBank n79 (4900 MHz) - NTT Of the above, B42/n79 are available on the latest iPhones, though you lose n257, and I'm guessing you're not going to find B11/B21 on a phone sold outside Japan.
    • T-Mobile acquiring SoniqWave's 2.5 GHz spectrum  Another spectrum speculator down! T-Mobile is acquiring all of their licenses and their leases. Details are lacking but it looks like T-Mobile might be giving them 3.45GHz in exchange in some of the markets where they're acquiring BRS/EBS to sweeten the deal and stay below the spectrum screen. Hopefully NextWave is at the negotiating table with T-Mobile so NYC can finally get access to the full BRS/EBS band as well. 
    • Maybe. The taller buildings on one side of the street all have Fios access and the NYCHA buildings are surrounded by Verizon macros that have mmWave. I don’t think this site will add much coverage. It’d be better off inside the complex itself.
    • Looks like a great place for for FWA. Many apartment dwellers only have one overpriced choice.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...