Jump to content

T-Mobile LTE & Network Discussion V2


lilotimz

Recommended Posts

They are constantly adding 600 MHz, though primarily in rural areas right now.  In most of the urban areas, it is dependent on the repack; Los Angeles/San Diego, Denver, Miami, Kansas City, and Houston should be cleared out within the next few weeks, even though T-Mobile has managed to squeeze some 5x5 deployments into some of those areas.
- Trip
Well 600 MHz deployment is happening quickly...for now it's just testing...

Sent from my ONEPLUS A6013 using Tapatalk

Link to comment
Share on other sites

B66 using the new AWS3 will need to be in CA. There are only 4 AWS3 blocks. Where they do own AWS3, it is mostly just 5x5 worth.
They are doing 3 carrier aggregation here...

Sent from my ONEPLUS A6013 using Tapatalk

Link to comment
Share on other sites

Hey DanLodish345. I had the same thing come up the other day on my embedded router.
Check out those earfcns'  You are seeing some sweet MFBI fren. 66736 is the band mask translation for 2140MHz,  2250 refers to the same block, 2140MHz just when detected as Band 4 by your handset, that indicates blocks D(5MHz) + E(5MHz) for 10MHz FDD. It just kicked on here, hopefully AWS-3 capacity is coming.
7grd.png
7gr3.png

The best part, I was roaming on Sprint [emoji3] Top is L66, bottom is band(s) L4+5+2 aggregated. It was the first I had seen of it as well. See how the math is exactly the same as yours?

We scored band 2 installations EOY 17,  5MHz is LTE on rural sites, city builds at 10MHz started appearing last summer so the rest should turn over soon, our whole market was modernized over the last year. Those speeds are really fast! Have a great day.

 
Where did you get that router from?

Sent from my ONEPLUS A6013 using Tapatalk

Link to comment
Share on other sites

On 3/22/2019 at 7:29 AM, Trip said:

They are constantly adding 600 MHz, though primarily in rural areas right now.  In most of the urban areas, it is dependent on the repack; Los Angeles/San Diego, Denver, Miami, Kansas City, and Houston should be cleared out within the next few weeks, even though T-Mobile has managed to squeeze some 5x5 deployments into some of those areas.

- Trip

My bad.  It should have read:

I have heard from sources of mixed reliability that T-Mobile will be adding a lot 600Mhz sites in Cleveland over the coming weeks  They currently have one site near the lake on the east side.

  • Like 1
Link to comment
Share on other sites

At midnight everybody it's fast, the cell towers are not congested compare to the day

Sent from my SM-N960U using Tapatalk

Ok i will test on Monday during rush hour. Speeds will generally be just as fast.

Sent from my SM-G965U using Tapatalk

  • Like 1
Link to comment
Share on other sites

Ok i will test on Monday during rush hour. Speeds will generally be just as fast.

Sent from my SM-G965U using Tapatalk

Here is one at prime use time on Sunday evening. I don't want to hijack this thread with Sprint anymore than i already have so I'd be happy to carry on this conversation in the appropriate Sprint thread. Screenshot_20190324-185541_Speedtest.jpeg

Sent from my SM-G965U using Tapatalk

  • Like 1
Link to comment
Share on other sites

L600 in Myrtle @ Hwy's 31/501 I thought them some big antennas, scpro grabbed it as usual.
 
7mwa.png
7mwb.png
7myn.png
Oh man this dual low band goodness is amazing. 20MHz FDD below 1GHz between l850 and l600.
This was pretty good to actuallyf527a8660955e077cbb18b852ad7df80.jpg

Sent from my ONEPLUS A6013 using Tapatalk

Link to comment
Share on other sites

On 3/31/2019 at 9:21 AM, belusnecropolis said:

L600 in Myrtle @ Hwy's 31/501 I thought them some big antennas, scpro grabbed it as usual.

 

7mwa.png

7mwb.png

7myn.png

Oh man this dual low band goodness is amazing. 20MHz FDD below 1GHz between l850 and l600.

It's not contiguous 20x20 600MHz?

Link to comment
Share on other sites

Are you on aggregated L600 here? I don't see how this applies in your response.
Hmm where I was it was in the FIT phase but where I live it is being rolled out...and aggregated

Sent from my ONEPLUS A6013 using Tapatalk

Link to comment
Share on other sites

  • 1 month later...
2 hours ago, Maverick said:

Fake! 🤔:hmm:

He put his T-Mobile SIM into a VZW S10 5G  a few days ago and it refused to authenticate but apparently it did yesterday. He even posted a live speed test.

 

  • Like 2
Link to comment
Share on other sites

19 minutes ago, bigsnake49 said:

How far away from the site? Across the street?

It seems like it. He went into a bit more detail and said that in the area he was in, they've been deploying on all of their mmWave sites on their macro sites. As a result, site spacing is about every two blocks. With clear line of site and being the only person on the network he was able to max out their 80MHz of mmWave spectrum. However, if PCMag's test of Verizon's network proves anything, it's that anything blocking your line of sight will make your signal drop, including leaves on a tree.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...