Jump to content

Sprint TD-LTE 2500/2600mhz Discussion


Recommended Posts

I think you still may be missing my point.  I have turned the WiFi off on my hotspot and directly tethering my laptop to my hotspot via USB, so there is no WiFi interface at all.  It's a direct connection.  When I do this with my VZW hotspot, I can sometimes hit 50Mbps at off peak times.  So this should allow me to exceed 35Mbps WiFi max I am hitting, as now my computer is directly connected to the hotspot's radios.

 

Robert

Like an external modem or NIC card from back in the day LOL

  • Like 1
Link to comment
Share on other sites

To sum up the issue for everyone reading, we have been unable to establish whether the Netgear tri band hotspot supports two spatial streams under 802.11n.  If not, then it is limited to 72 Mbps minus overhead.  And that would artificially cap its 20 MHz TDD LTE downlink throughput.  USB 2.0 tethering circumvents any Wi-Fi bottlenecks altogether.

 

AJ

  • Like 3
Link to comment
Share on other sites

I think you still may be missing my point.  I have turned the WiFi off on my hotspot and directly tethering my laptop to my hotspot via USB, so there is no WiFi interface at all.  It's a direct connection.  When I do this with my VZW hotspot, I can sometimes hit 50Mbps at off peak times.  So this should allow me to exceed 35Mbps WiFi max I am hitting, as now my computer is directly connected to the hotspot's radios.

 

Robert

 

I get it now.  I didn't know you could use the hotspot for tethering through the USB.  I thought the USB port was only used for charging.

  • Like 1
Link to comment
Share on other sites

To sum up the issue for everyone reading, we have been unable to establish whether the Netgear tri band hotspot supports two spatial streams under 802.11n.  If not, then it is limited to 72 Mbps minus overhead.  And that would artificially cap its 20 MHz TDD LTE downlink throughput.  USB 2.0 tethering circumvents any Wi-Fi bottlenecks altogether.

 

AJ

USB 2.0 has a maximum theoretical thru put of 480Mbps so it should not present a bottle neck

  • Like 2
Link to comment
Share on other sites

does the zing and mifi500 require special drivers to be installed for usb tethering?

 

I picked up a tri-fi hotspot (3g/wimax/lte) but it requires special drivers (shows up as cd rom with plugged into usb) which unfortunately won't install on any of my computers.

 

by contrast, my clearwire hotspot does not use any special drivers, it shows up as an RNDIS/ethernet gadget.

Link to comment
Share on other sites

Can you tether a phone to a mifi via USB with an OTG cable?

shouldn't need an OTG cable, just a standard microusb to regular usb cable, the same thing that probably came with the device and every phone in the last few years.

Link to comment
Share on other sites

To piggyback on this. I have a WiMax phone and I have noticed that some sites in Austin appear to have higher bandwidth available now than a year ago. Part of that is, of course, due to people moving off WiMax but it is not a consistent change among all the towers here. I am fully expecting Austin to be in the next round of cities that Clearwire LTE is launched in. If only someone in Austin had a Triband hotspot to test. . .

 

I'll be in Austin with my MiFi hotspot in late September. I'll make sure to test the hell out of it. :)

Link to comment
Share on other sites

It's official. I'm heading back to Denver tomorrow afternoon. I booked a room at the Renaissance hotel directly under the fastest TD-LTE 2600 site I encountered.

 

Robert

 

Alright, everyone. Let's throw some cash Robert's way via that Sponsorship link. It's the right thing to do!  :tu:

  • Like 2
Link to comment
Share on other sites

Alright, everyone. Let's throw some cash Robert's way via that Sponsorship link. It's the right thing to do!  :tu:

 

Good call.  I am on board with my donation...

 

AJ

  • Like 2
Link to comment
Share on other sites

does the zing and mifi500 require special drivers to be installed for usb tethering?

 

I picked up a tri-fi hotspot (3g/wimax/lte) but it requires special drivers (shows up as cd rom with plugged into usb) which unfortunately won't install on any of my computers.

 

by contrast, my clearwire hotspot does not use any special drivers, it shows up as an RNDIS/ethernet gadget.

It did for me. On my VZW hotspot, it didn't. But it wouldn't work on my Netgear Triband hotspot when it did the auto install when I plugged it in. I had to go to the Netgear website download and install those drivers...and, voila!

 

Sent from my SPH-L900 using Tapatalk 4 Beta

 

Link to comment
Share on other sites

Alright, everyone. Let's throw some cash Robert's way via that Sponsorship link. It's the right thing to do! :tu:

Thanks for the donation. I will add it to the "Denver or Bust Fund."

 

Sent from my SPH-L900 using Tapatalk 4 Beta

 

 

  • Like 1
Link to comment
Share on other sites

Thanks for the donation. I will add it to the "Denver or Bust Fund."

 

Sent from my SPH-L900 using Tapatalk 4 Beta

 

Hopefully you get to Denver and not "Bust"!

  • Like 1
Link to comment
Share on other sites

It did for me. On my VZW hotspot, it didn't. But it wouldn't work on my Netgear Triband hotspot when it did the auto install when I plugged it in. I had to go to the Netgear website download and install those drivers...and, voila! 

 

Ugh, I downloaded the mux drivers from netgear and get the same error; internal error 2738

 

http://kb.netgear.com/app/answers/detail/a_id/23394

 

edit; this registry edit fixed it

http://helpdesk.illinoisstate.edu/kb/1474/Error_Internal_Error_2738_when_installing_Cisco_VPN_client_on_Windows_Vista_or_Windows_7/

  • Like 1
Link to comment
Share on other sites

Specifically, where did anyone say that Sprint is hitting every site with TD?

 

sent via my SIII on Tapatalk 4 beta

 

They said it days ago in the earning conference call.. 

Link to comment
Share on other sites

USB 2.0 has a maximum theoretical thru put of 480Mbps so it should not present a bottle neck

Or 60 mbytes/second max. Robert already hit about 60% of that. Its all just bragging rights anyway I don't think anything really needs even 10 mbytes/second.

 

Sent from my SPH-L900 using Tapatalk 4 Beta

 

 

Link to comment
Share on other sites

Or 60 mbytes/second max. Robert already hit about 60% of that. Its all just bragging rights anyway I don't think anything really needs even 10 mbytes/second.

 

Sent from my SPH-L900 using Tapatalk 4 Beta

I can't tell you enough how many times my friends on AT&T and Verizon brag about how their network performs.  Once I get Clearwire LTE, I'll be able to put them in their place by bragging about my speeds AND unlimited data.  HA!

Link to comment
Share on other sites

Or 60 mbytes/second max. Robert already hit about 60% of that. Its all just bragging rights anyway I don't think anything really needs even 10 mbytes/second.

 

Sent from my SPH-L900 using Tapatalk 4 Beta

USB 2.0 hits 25 megabytes per second. I worked with getting raw pixel data off of camera sensors - automotive - and that's the max I ever saw sustained.
Link to comment
Share on other sites

I will brag too, I just mean its plenty fast. Bragging right do drive customers tho.

 

Sent from my SPH-L900 using Tapatalk 4 Beta

 

 

Link to comment
Share on other sites

I can't tell you enough how many times my friends on AT&T and Verizon brag about how their network performs. Once I get Clearwire LTE, I'll be able to put them in their place by bragging about my speeds AND unlimited data. HA!

Just not in any big buildings or your basement.
Link to comment
Share on other sites

USB 2.0 hits 25 megabytes per second. I worked with getting raw pixel data off of camera sensors - automotive - and that's the max I ever saw sustained.

 

I have gotten 50-60Mbps on USB 2.0 before, no problem tethering my VZW hotspot.  I just hit 34Mbps this morning testing it out.

 

Robert

  • Like 1
Link to comment
Share on other sites

I have gotten 50-60Mbps on USB 2.0 before, no problem tethering my VZW hotspot. I just hit 34Mbps this morning testing it out.

 

Robert

Yes, megaBits, not megaBytes.

 

25 megabytes/sec * 8 = 200 megabits per sec.

Edited by bluespruce1901
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Mapped two n41 small cell sin Jersey City today. They're the first two to be mapped there in Jersey City as far as I can tell and interestingly they're consecutive gNBs, possibly indicating they were installed around the same time. gNB 1088335 appears to be an upgrade of an older small cell. It looks identical to the T-Mobile n41 small cell I mapped earlier this year in Old Westbury.   I also mapped gNB 1088334 in Newport. This small cell appears to be a new build as I couldn't find any evidence of an older small cell in that area. Unfortunately no pic of it since I didn't even notice that I mapped it until I got home and I can't find it in Streetview.
    • Someone told me a couple years ago, that there were problems getting certain modems to aggregate overlapping spectrum even if the overlapping parts were actually blanked. So I think there might be firmware issues that need to be resolved first, which T-Mobile might not consider worth the effort for 4MHz at this time.
    • Tbh not that surprising. Every ISP seems to want to have an MVNO to pitch to their customers to make them stickier and maybe make some money in the process. And unlike USCC the MVNO should be able to cover TDS's entire wireline area, with infrastructure costs that are borne by someone else. Entertaining, yes. Surprising, not really...particularly when competing against Comcast or Spectrum, or even eventually T-Mobile fixed + mobile. This also strengthens my bet that they'll rebrand all their fixed wireless stuff as TDS, as that runs on spectrum they're keeping for now.
    • No? RCS on Google messages works great for me, messages between anyone with RCS enabled go through with no problems. Don't remember the last time I had an issue. I only have issues with people on iPhones on different carriers from T-Mobile.
    • Has anyone experienced a ridiculous amount of difficulty with Google messages with RCS enabled?  It has been a train wreck for me for the past year so I now use WhatsApp.  That works very well for all of us.... Android and iOS.  
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...