Jump to content

Network Vision/LTE - Washington DC Market


dstrait

Recommended Posts

The outdoor stations do well.  I commute from Huntington to Smithsonian every day via L'enfant Plaza and have B41 LTE service at Huntington (sometimes falls back to 3G while waiting on train since the station's built into the hillside) and Eisenhower.  I usually see 1X 800 in the tunnel north of Eisenhower, then B25 or B26 LTE at King Street and Braddock Road.  (Building permits suggest that B41 is coming soon to the towers missing it along the way.)  B26 LTE hangs on very usably through the tunnel north of Braddock and then I get B41 LTE back as I approach DCA.  Then it's decent 3G in the underground stations and roaming onto Verizon 1X (VERY slow) in the tunnels except for a few holes here and there when stopped in the tunnels.  I get B41 LTE on the Yellow Line bridge over the Potomac.

 

- Trip

Link to comment
Share on other sites

Well slightly good news to report in Frederick. I was coming home past the Harry Grove stadium last night and noticed LTE service, about 2-3 bars worth. It stayed connected until I just reached the school for the deaf and switched back to 3G service.

 

However didn't switch over to LTE when I drove past there to drop my kids off at school this morning.

Edited by ggalmin
Link to comment
Share on other sites

I picked up a Sharp Aquos Crystal last night and discovering I have band 41 in Herndon and around the Dulles airport at work. With this phone, I can actually overlay the engineering screen as I work the phone normally.

  • Like 4
Link to comment
Share on other sites

I picked up a Sharp Aquos Crystal last night and discovering I have band 41 in Herndon and around the Dulles airport at work. With this phone, I can actually overlay the engineering screen as I work the phone normally.

 

That's cool, looks like you're getting fast speeds with that B41, too.

  • Like 1
Link to comment
Share on other sites

I spent the last few days in meetings and travel around DC, Northern VA, and MD.  The Sprint experience was satisfactory, but there were still noticeable pockets where I dropped to 3G.

 

Yeah, without Clear you'd see much diminished service within the District. It really shows how powerful B41 can be even if it stands on its own. Unfortunately, a lot of the remaining sites are either difficult or waiting for back haul. Every week it gets better though!

Link to comment
Share on other sites

There are still a large number of untouched sites in this area.  At home, I'm on a Clearwire site, as I am at the grocery stores at Beacon Hill, but not at Safeway in Rose Hill, which is still 3G only.  There's a tower near L'enfant Metro which is 3G only still, as is the tower nearest to Smithsonian Metro (which grabs weak LTE from a more distant location), Pentagon City Mall is still 3G, and there are many others.  Granted, these are just in places that I go regularly, but I can understand why Sprint might want to hold off until the LTE coverage is more consistent.

 

- Trip

  • Like 1
Link to comment
Share on other sites

Agreed. What's been the cause of the major delays in the DC market? Permits? Equipment? Crews? Backhaul?

Not that I have any real knowledge, but from what I have read both in this thread and from other sources, all of the things you mentioned are reasons for the delay.

 

Just from what I have read in this thread, it seems that Backhaul and Permits are the biggest problems in Maryland, permits seem to be the biggest problem in DC, and equipment delays seem to be the problem in NoVA.

Link to comment
Share on other sites

I noticed the three towers nearest to me with only 3G are all cell towers sticking up through power distribution towers.  I've been wondering if there's a special crew or special arrangement that needs to be made to work on those.

 

- Trip

Link to comment
Share on other sites

I noticed the three towers nearest to me with only 3G are all cell towers sticking up through power distribution towers.  I've been wondering if there's a special crew or special arrangement that needs to be made to work on those.

 

- Trip

This is common in other areas too.   I do think it takes a special crew to get above high voltage lines.  Might be the power company itself that has to do it for Sprint.  I see many that still are only 3G accepted and still have the legacy antennas with RRU's on the ground. In many cases, they can push 1900 LTE out through the legacy antennas and are doing that.

Link to comment
Share on other sites

This is common in other areas too.   I do think it takes a special crew to get above high voltage lines.  Might be the power company itself that has to do it for Sprint.  I see many that still are only 3G accepted and still have the legacy antennas with RRU's on the ground. In many cases, they can push 1900 LTE out through the legacy antennas and are doing that.

 

They ultimately replace these legacy antennas as part of Network Vision, right?

Link to comment
Share on other sites

They ultimately replace these legacy antennas as part of Network Vision, right?

I have not yet seen one that has been upgraded.   Some may have been, but I have not seen it. If they ever want to transmit 800 or 2500 from those sites, they must replace the antennas. I have seen new base stations at the bottom of the high voltage towers and they are active with 1900 LTE. I would question if they would ever put the RRU's up above the high voltage lines in a spot so hard to get to.  RRU's do go bad and I could see a long term outage if the RRU was not easily accessed.

I have some hope that they are going to add the new 1900-800 antennas and the new 2500 antennas at the same time.  But that is just my hope and nothing more.

Link to comment
Share on other sites

  • 2 weeks later...

I have been on band 41 forever at my house.  This morning I am parked on band 25 (yuck).  Anything going on?  TDD-LTE has such better battery life as compared to LTE on bands 25 an 2

 

Perhaps maintenance/optimization or maybe they had to shut down Band 41 temporarily to bring other towers online. If you're experiencing significant speed/coverage issues, you can use the Sprint Zone "Report an Issue" tool to report them.

Link to comment
Share on other sites

Is it possible it get Sprint Zone on a custom rom like CM11?

 

I think (and hoping not) that they activated LTE on band 25 here.  Because when I had a Galaxy Nexus, I was on 3G and could not get LTE in home.  I will give it sometime, hopefully band 41 returns. 

Edited by fubka
Link to comment
Share on other sites

Is it possible it get Sprint Zone on a custom rom like CM11?

 

Unlike the iOS version which can be downloaded from the App Store, Sprint Zone is not available as a downloadable app for Android. It's preinstalled on Sprint's Android devices and not available on Nexus devices for that reason.

http://www.androidpolice.com/2014/11/24/the-stark-contrast-nexus-6-on-sprint-and-t-mobile-vs-att/

 

"This may have something to do with the fact that Sprint Zone (the company's equivalent to a "my account" app) requires system-level integration and thus is not available for download on Google Play. It comes pre-installed on the system partition of just about every Android device Sprint sells that isn't called Nexus, and it updates itself automatically."

Link to comment
Share on other sites

Still on band 25 since 9:39 AM according to my LTE Discovery app log.  Anyway to see if they are doing work on my tower?

 

Also, shouldn't band 41 be the preferred band sprint wants people on first?

Link to comment
Share on other sites

Still on band 25 since 9:39 AM according to my LTE Discovery app log.  Anyway to see if they are doing work on my tower?

 

Also, shouldn't band 41 be the preferred band sprint wants people on first?

 

It really all depends on what the tower wants. I assume this was a clearwire B41 site?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...