Jump to content

Google Nexus 5 by LG Users Thread!


nexgencpu

Recommended Posts

Is there a consensus on what Qualcomm chipset the Nexus 6 will use? The latest evidence/rumor is that it will be the Snapdragon 805, which is the APQ8084. Since it is an APQ not an MSM, it has no cellular baseband on chip. That means back to two chipsets -- it has to be paired with an MDM, likely the Category 6 MDM9635/MDM9235.

 

And therein lies the rub. The MDM9635 is 3GPP/3GPP2, while the MDM9235 is 3GPP only. The Gobi modems come in a 3GPP only option, while the Snapdragon MSM chipsets typically are 3GPP/3GPP2 -- even for AT&T and T-Mobile handsets, for example. With the MSM8974, the Nexus 5 had CDMA2000 capability on board, regardless. But with a possible APQ8084 + MDM9235 pairing, Sprint could get shut out of the Nexus 6.

 

AJ

I think they will maintain their partnership with Google and will still get the Nexus 6 (or Nexus 5 2014). Keep in mind planning for this device was probably already underway when the Nexus 5 was released.
Link to comment
Share on other sites

Is there a consensus on what Qualcomm chipset the Nexus 6 will use?  The latest evidence/rumor is that it will be the Snapdragon 805, which is the APQ8084.  Since it is an APQ not an MSM, it has no cellular baseband on chip.  That means back to two chipsets -- it has to be paired with an MDM, likely the Category 6 MDM9635/MDM9235.

 

And therein lies the rub.  The MDM9635 is 3GPP/3GPP2, while the MDM9235 is 3GPP only.  The Gobi modems come in a 3GPP only option, while the Snapdragon MSM chipsets typically are 3GPP/3GPP2 -- even for AT&T and T-Mobile handsets, for example.  With the MSM8974, the Nexus 5 had CDMA2000 capability on board, regardless.  But with a possible APQ8084 + MDM9235 pairing, Sprint could get shut out of the Nexus 6.

 

AJ

Good point. I completely forgot about the Nexus 6 being rumored to have an APQ chipset, which does make it much harder to have both CDMA and GSM on board. The Nexus 4 was also using a Snapdragon S4 pro (APQ8064), and that only had AT&T and T-Mobile support.

 

Looks like my point was proven even more so: if the Nexus 6 doesn't make it to Sprint, it's going to be due to CDMA + GSM compatibility, not LTE band capability.

Link to comment
Share on other sites

Does buying a Nexus 5 from the play store still require an annoying process to get a sim card, or has the process been made simple?

Well check your sprint stores for sims right now to see how annoying it is. Because the play store n5 won't have one.

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

Hold volume down and press and hold the power button until you see the bootloader. It's unlikely that you flashed a bad bootloader if you were using the 4.4.4 factory image.

Use the factory image from here: https://developers.google.com/android/nexus/images

still Nada. My computer beeps but no devices recognized in adb, fastboot or LG flash tools
Link to comment
Share on other sites

still Nada. My computer beeps but no devices recognized in adb, fastboot or LG flash tools

I would try posting over on xda nexus 5 help section if you haven't already. You'll probably take some flak for flashing the way you did but there's bound to be some one that already bricked their phone doing the same thing you did and might have a solution already.

Link to comment
Share on other sites

It literally does nothing.

if you can't get to bootloader mode there's not much you can do.

the battery didn't run out while flashing?

assuming there is plenty of juice in the battery try holding vol down button and power button and then plug in the charger at the same time

Link to comment
Share on other sites

Is there a consensus on what Qualcomm chipset the Nexus 6 will use?  The latest evidence/rumor is that it will be the Snapdragon 805, which is the APQ8084.  Since it is an APQ not an MSM, it has no cellular baseband on chip.  That means back to two chipsets -- it has to be paired with an MDM, likely the Category 6 MDM9635/MDM9235.

 

And therein lies the rub.  The MDM9635 is 3GPP/3GPP2, while the MDM9235 is 3GPP only.  The Gobi modems come in a 3GPP only option, while the Snapdragon MSM chipsets typically are 3GPP/3GPP2 -- even for AT&T and T-Mobile handsets, for example.  With the MSM8974, the Nexus 5 had CDMA2000 capability on board, regardless.  But with a possible APQ8084 + MDM9235 pairing, Sprint could get shut out of the Nexus 6.

 

AJ

Would using 2 chips destroy the battery life?

Link to comment
Share on other sites

You probably would have never thought that the Nexus 5 would have supported as many bands as it did, either. Supporting more LTE bands is not really all that difficult. The difficult thing for them was adding B41 last time, yet they did. All the Sprint bands are supersets of other bands except B41. No need to worry.

 

Robert via Nexus 5 using Tapatalk

That's true, hopefully they keep coming back with em and if they do hopefully LTE preforms better on it in Chicago. 

 

edit: also looking for better battery life. man I sound like a spoiled 16 year old who's parents bought her the wrong color bmw.

Link to comment
Share on other sites

Would using 2 chips destroy the battery life?

 

Did that destroy the battery life on, for example, the HTC One M7 and Samsung Galaxy S4?

 

AJ

Link to comment
Share on other sites

Did that destroy the battery life on, for example, the HTC One M7 and Samsung Galaxy S4?

 

AJ

I owned an m7 before my n5 and my battery life was terrible. Can't speak to the gs4, never owned one for a while. 

Link to comment
Share on other sites

Would using 2 chips destroy the battery life?

From a technical standpoint, it may affect it, but it should not be such a big difference that you would consider the battery life "destroyed". Since the APQ chipsets don't have the hardware to support the cellular baseband, it should take less power to power the whole chip than if baseband hardware was on the chip itself. Now the power is instead directed to the MDM chip which will have its own power characteristics. Those power characteristics might be better than, or worse than, having the same thing on the main chip itself. It all depends on what the hardware is capable of, how efficient the chip making process is, and what power management features they have for the chip.

Link to comment
Share on other sites

In addition to changing some of the location and wifi settings, today I set network mode to 3G only and have noticed a huge increase in battery life. I'm sitting at 23 hours on battery with light use, mostly texting and voice calls, with 78% battery remaining. It feels like I fell in love with the phone all over again after having such horrid battery problems. It's just unfortunate you need to make so many changes to get the stand by time up, I feel like the average user might just give up on the nexus and say it sucks.

Link to comment
Share on other sites

In addition to changing some of the location and wifi settings, today I set network mode to 3G only and have noticed a huge increase in battery life. I'm sitting at 23 hours on battery with light use, mostly texting and voice calls, with 78% battery remaining. It feels like I fell in love with the phone all over again after having such horrid battery problems. It's just unfortunate you need to make so many changes to get the stand by time up, I feel like the average user might just give up on the nexus and say it sucks.

Curious is your LTE strength usually strong if not weak signal can drain a battery. Switching to EVDo usually means the signal is better, and can help reduce battery that way.
Link to comment
Share on other sites

In addition to changing some of the location and wifi settings, today I set network mode to 3G only and have noticed a huge increase in battery life. I'm sitting at 23 hours on battery with light use, mostly texting and voice calls, with 78% battery remaining. It feels like I fell in love with the phone all over again after having such horrid battery problems. It's just unfortunate you need to make so many changes to get the stand by time up, I feel like the average user might just give up on the nexus and say it sucks.

Setting mine to CDMA only gives worse battery life than LTE. I'm not sure your results are representative of the typical user. I got great battery life (comparatively) when I was using the N5.

 

Sent from my LG G3

Link to comment
Share on other sites

Curious is your LTE strength usually strong if not weak signal can drain a battery. Switching to EVDo usually means the signal is better, and can help reduce battery that way.

LTE signal strength is relatively poor across most of the city, even in area's where all sites have been upgraded. GSAM reports 90% of my radio is medium or below on LTE. B26 can't come soon enough.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...