Jump to content

LG G2 Users Thread!


koiulpoi

Recommended Posts

Lets get one thing clear. Auto brightness has never been good on the g2. Not before or after the kitkat update.

 

  At least for me it was fine until Kit Kat. I'm trying Lux, is it ok as is, or do I need to do anything in the settings?

Link to comment
Share on other sites

Pretty much everything is better after the update except one thing: auto brightness is hosed now. Indoors at night under normal light, the screen gets REAL dark and keeps getting bright, then dimming. The obvious fix is to turn auto brightness off, just wondering if it's a known issue or if there's any workaround. It worked great before Kit kat

Another fantastic auto brightness app that I use is YAAB. Yet Another Auto Brightness. It allows you to set the minimum level that you want the brightness to dim down to. You should give it a try!

  • Like 1
Link to comment
Share on other sites

At least for me it was fine until Kit Kat. I'm trying Lux, is it ok as is, or do I need to do anything in the settings?

Lux performs pretty well out of the gate. I did some minor brightness linking so it better suits my lighting level specific brightness needs.

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Lux performs pretty well out of the gate. I did some minor brightness linking so it better suits my lighting level specific brightness needs.

 

Sent from my LG-LS980 using Tapatalk

Agreed, now using Lux pro on both of my main Android devices. :lol:

 

Sent from my SM-T217S using Tapatalk

 

 

  • Like 1
Link to comment
Share on other sites

Everyone says how great the RF performance is with this phone but mine has been really terrible. At work and at home - places I had a strong LTE signal on my GS4 - I'm stuck on 3G. I do get 1.5 - 2 down on NV 3G but why is this phone's RF performance so awful? I am now rarely on LTE where I used to be over 90% of the time with my GS4. what gives?

Link to comment
Share on other sites

Everyone says how great the RF performance is with this phone but mine has been really terrible. At work and at home - places I had a strong LTE signal on my GS4 - I'm stuck on 3G. I do get 1.5 - 2 down on NV 3G but why is this phone's RF performance so awful? I am now rarely on LTE where I used to be over 90% of the time with my GS4. what gives?

Sounds like a CSFB issue. Where do you live? The gs4, assuming it wasn't the newer gs4 triband is a single path radio device.

Link to comment
Share on other sites

Sounds like a CSFB issue. Where do you live? The gs4, assuming it wasn't the newer gs4 triband is a single path radio device.

 

I just picked up G2 and was wondering why I'm not picking up LTE where my GS3 could.  I guess CSFB makes sense, I was holding off on the upgrade, hoping Sprint would release a phone that had separate radios for each function, but I was wrong.

Link to comment
Share on other sites

If anyone else is seeing the Android kernel battery drain on gsam I found this recommendation on another site and wanted to pass it along.. I just made these modifications and will report back later to let you know if mine changed any...

 

"Follow your recommendations on this thread I installed GSam and found Android Kernal was accounting for 60% battery drain. After a bit of digging around on forums Google is indicated to possibly to be the culprit. Therefore I went to google settings via the app and done the following;

 

Connected apps > disconnected all apps bar mail. This seems to have no negative effects

Location > Turn OFF location reporting. Google play service + low battery use (not sure what this is)

Search and Now > Google now turned OFF, Phone search = no change,

Search and Now > voice> OK Google hotword detection > Turn off (think the phone is always listening for a voice command.

 

Since doing this last night I can report;

7hrs of phone sleep/standby and only 1-2% battery drain total

8hrs moderate use today and I'm on 71% remaining (massive increase before the changes. That includes out in the fields in low signal areas (I'm a farmer).

Sorry for the essey, hope this helps someone"

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Ok so for my first report with battery life after kk and after I didn't want to install it cause my previous kk update on old g2 killed my battery.

 

So with four hours straight of Pandora and moderate use I was able to get 22 hours out of my first run with kk. I'm very impressed and happy.

 

Once again I would like to thank my buddy for the great tips.

 

Also the few of you that have mentioned some idea's. Thanks

  • Like 1
Link to comment
Share on other sites

Broke down and got G2.  I must say, I'm not too impressed with the way Sprint did their tri-band devices.  The single pathway isn't all that great and G2 stays on 3G where my S3 was staying on LTE.  It also doesn't seem to pick up B41, it has the Spark upgrade and all bands are enabled.  B25 - 1, B26 - 2, B41 - 3.

Link to comment
Share on other sites

Broke down and got G2. I must say, I'm not too impressed with the way Sprint did their tri-band devices. The single pathway isn't all that great and G2 stays on 3G where my S3 was staying on LTE. It also doesn't seem to pick up B41, it has the Spark upgrade and all bands are enabled. B25 - 1, B26 - 2, B41 - 3.

Do you have band 41 active where you live?

 

Sent from my bareback LG G2

 

 

Link to comment
Share on other sites

Broke down and got G2.  I must say, I'm not too impressed with the way Sprint did their tri-band devices.  The single pathway isn't all that great and G2 stays on 3G where my S3 was staying on LTE.  It also doesn't seem to pick up B41, it has the Spark upgrade and all bands are enabled.  B25 - 1, B26 - 2, B41 - 3.

First thing, The fact that the G2 does not connect to LTE where your S3 does has nothing to do with Tri-band being inferior to single band devices. More than likely what's happening is that eCSFB is not active at that local site. Also, are there band 41 sites enabled in your location? You can confirm this by visiting the premiere sponsor maps.

Link to comment
Share on other sites

First thing, The fact that the G2 does not connect to LTE where your S3 does has nothing to do with Tri-band being inferior to single band devices. More than likely what's happening is that eCSFB is not active at that local site. Also, are there band 41 sites enabled in your location? You can confirm this by visiting the premiere sponsor maps.

There are B41 sites around where I live. I drove past one yesterday and my phone was connected to B25, despite B41 being far closer. I'm new to the tri band scene, still trying to figure it all out.

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

There are B41 sites around where I live. I drove past one yesterday and my phone was connected to B25, despite B41 being far closer. I'm new to the tri band scene, still trying to figure it all out.

 

Sent from my LG-LS980 using Tapatalk

You need your msl number in order to change the priority on those bands that way you will connect to 41 first then 25,

You will need to have 26-1 25-0 41-1 that will give you 26-1 41-2 25-3

 

Sent from my bareback LG G2

 

 

Link to comment
Share on other sites

Unless you do 41-1 25-0 26-0 that will give you priority to band 41 first

 

Sent from my bareback LG G2

I read that it can only be changed thru MSL code, unless there's another way. But, idk which code to use.

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

I read that it can only be changed thru MSL code, unless there's another way. But, idk which code to use.

 

Sent from my LG-LS980 using Tapatalk

 

If you haven't taken the KK update you can type this in the dialer screen and it will flash across the bottom ##443336772#

Link to comment
Share on other sites

You need your msl number in order to change the priority on those bands that way you will connect to 41 first then 25,

You will need to have 26-1 25-0 41-1 that will give you 26-1 41-2 25-3

 

Sent from my bareback LG G2

That isn't completely true. Band priority only tells the phone what band to scan first, the network controls what band you will connect to and be put on.

 

Sent from my Nexus 5 using Tapatalk

 

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...