Jump to content

LG G2 Users Thread!


koiulpoi

Recommended Posts

My root method would have nothing to do with the LTE. I'm a repair tech for Sprint and 2 of my other co-workers are saying they cannot connect at all also.

 

Sent from my LG-LS980 using Tapatalk

 

That aside, "a control group needs to be as is, out of box or as we'd typically call, "stock".  

Link to comment
Share on other sites

My root method would have nothing to do with the LTE. I'm a repair tech for Sprint and 2 of my other co-workers are saying they cannot connect at all also.

 

Sent from my LG-LS980 using Tapatalk

Have you pulled the back battery cover off? If so can you take a pic of the door.. Anyone know what connections run back there? NFC?...

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

pulled the sim, reinserted no difference, i tried forcing a connection by switching network mode from lte/cdma to global. back and forth, Lte symbol appears but drops immediately.

Mine did the same While driving home... I'll test tomorrow at work. Have late 1900 there..

Any chance you could snap a pic of the battery door on the inside..like to see what connections run to it

Link to comment
Share on other sites

With all those dummy entries I don't think can. I think your running pre released firmware that wasn't supposed to hit the streets.

 

Sent from my One using Tapatalk

 

Not just think....for sure these phones have bad software.

 

I bet a firmware update pushes to solve this on launch date.

 

You know the file is a test file because of the comments and included LGE email address.

Link to comment
Share on other sites

Mine did the same While driving home... I'll test tomorrow at work. Have late 1900 there..

Any chance you could snap a pic of the battery door on the inside..like to see what connections run to it

I dont think the back cover comes off.... If you want to know if the phone has NFC, it does.

Link to comment
Share on other sites

Mine did the same While driving home... I'll test tomorrow at work. Have late 1900 there..

Any chance you could snap a pic of the battery door on the inside..like to see what connections run to it

I know it comes off..is NFC the only connection to the back cover? Also does your GPS work? Mine won't lock signal is to weak

Link to comment
Share on other sites

Damn.. That even makes it more fishy. Totally forgot the back is not easily removed... Without excessive force applied to a theft tether.

Thought if it was stollen the ESN would be flagged and I couldn't activate it?

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Really meticulous question for those few owners so far, but does group SMS work on the messaging app, or do I still need to use handcent?

People hate me with group messaging... All the random phone numbers sending thanks.. Lol.. Haha... They all get a wonderful slew of pictures and texts flooding their inbox. Needless to say no one sends me that crap now.

  • Like 1
Link to comment
Share on other sites

People hate me with group messaging... All the random phone numbers sending thanks.. Lol.. Haha... They all get a wonderful slew of pictures and texts flooding their inbox. Needless to say no one sends me that crap now.

Like a damn iPhone

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Whenever my manager sends a group text with his iPhone, I constantly get all the texts between him and the other coworkers who have iPhones. I have to delete the thread whenever he sends a group message.

Link to comment
Share on other sites

Maybe they don't know yet?

I'm looking at the APN list and finding that Sprint's values, most of them are empty.  Maybe compare the Sprint APNs with one from, let's say a Note 2 or GS3?  

 

EDIT: In the APN list, it says Auth type:"0".

 

0 = false.  This may prevent it from using an LTE connection.

 

Change the 0 to a 1 and maybe see if that fixes?  We'll likely need root to write to /system, though.

 

EDIT2:

 

 

<!-- Sprint -->
    <apn carrier="Sprint" mcc="310" mnc="120" apn="Sprint" user="Sprint" server="*" type="mms" password="*" mmsc="http://mms.sprintpcs.com" mmsproxy="68.28.31.7" mmsport="80" authtype="3"/>
    <apn carrier="Sprint LTE ota" mcc="310" mnc="120" apn="otasn" type="fota" protocol="IPV4V6" roaming_protocol="IPV4V6" bearer="14" />
    <apn carrier="Sprint EHRPD ota" mcc="310" mnc="120" apn="otasn" type="fota" protocol="IPV4V6" roaming_protocol="IPV4V6" bearer="13" />
    <apn carrier="Sprint LTE internet" mcc="310" mnc="120" apn="n.ispsn" type="default,mms,supl,hipri" mmsc="http://mms.sprintpcs.com" mmsproxy="68.28.31.7" mmsport="80" protocol="IPV4V6" roaming_protocol="IPV4V6" bearer="14" />
    <apn carrier="Sprint EHRPD internet" mcc="310" mnc="120" apn="n.ispsn" type="default,mms,supl,hipri" mmsc="http://mms.sprintpcs.com" mmsproxy="68.28.31.7" mmsport="80" protocol="IPV4V6" roaming_protocol="IPV4V6" bearer="13" />
    <!-- END Sprint -->
 

 

That above is the APN list from a Sprint GS3 CM10.2 ROM.

Link to comment
Share on other sites

Whenever my manager sends a group text with his iPhone, I constantly get all the texts between him and the other coworkers who have iPhones. I have to delete the thread whenever he sends a group message.

 

Coming soon to an Android 4.3 device near you...

 

I'm actually looking forward to that.  You're getting the negative side effect of all the group replies already, might as well join in the fun and be able to spam them all back!

 

-Mike

Link to comment
Share on other sites

!-- Start of Apn database for Sprint LTE support -->

mcc="310"

mnc="120"

apn="otasn"

type="fota"

protocol="IPV4V6"

roaming_protocol="IPV4V6"

bearer="14"

/>

 

mcc="001"

mnc="010"

apn="n.ispsn"

type="default, mms"

mmsc="http://mms.sprintpcs.com"

mmsproxy = "68.28.31.7"

mmsport = "80"

protocol="IPV4V6"

roaming_protocol="IPV4V6"

bearer="14"

/>

 

mcc="001"

mnc="010"

apn="otasn"

type="fota"

protocol="IPV4V6"

roaming_protocol="IPV4V6"

bearer="14"

/>

 

mcc="001"

mnc="010"

apn="pamsn"

type="dun"

protocol="IPV4V6"

roaming_protocol="IPV4V6"

bearer="14"

/>

 

mcc="001"

mnc="01"

apn="n.ispsn"

type="default, mms"

mmsc="http://mms.sprintpcs.com"

mmsproxy = "68.28.31.7"

mmsport = "80"

protocol="IPV4V6"

roaming_protocol="IPV4V6"

bearer="14"

/>

 

mcc="001"

mnc="01"

apn="otasn"

type="fota"

protocol="IPV4V6"

roaming_protocol="IPV4V6"

bearer="14"

/>

 

mcc="001"

mnc="01"

apn="pamsn"

type="dun"

protocol="IPV4V6"

roaming_protocol="IPV4V6"

bearer="14"

/>

 

4.2.2 gnex

 

Sent from my Galaxy Nexus using Tapatalk

 

 

Link to comment
Share on other sites

Lots of dummy entries. That doesn't look clean at all. Phone might not know what entry to use for LTE.

 

Definitely looks like a test file.. if the G2 does use it for connecting to LTE, nobody is going to connect to Band 26 or 41 with it as-is.

 

-Mike

  • Like 1
Link to comment
Share on other sites

apns version="7">

<!-- LTE TEST SIM APN START -->

<apn preferapp="" defaultflag="0" bearer="0" protocol="IP" type="fota" mmsport="" mmsproxy="" mmsc="" port="" proxy="" server="" authtype="0" password="ncc" user="ncc" apn="ota" mnc="01" mcc="001" carrier="DefaultOTA"/><apn preferapp="" defaultflag="0" bearer="0" protocol="IP" type="default" mmsport="" mmsproxy="" mmsc="" port="" proxy="" server="" authtype="0" password="ncc" user="ncc" apn="internet" mnc="01" mcc="001" carrier="DefaultInternet"/><apn preferapp="" defaultflag="0" bearer="0" protocol="IP" type="dun" mmsport="" mmsproxy="" mmsc="" port="" proxy="" server="" authtype="0" password="ncc" user="ncc" apn="pam" mnc="01" mcc="001" carrier="DefaultPAM"/><apn preferapp="" defaultflag="0" bearer="0" protocol="IP" type="fota" mmsport="" mmsproxy="" mmsc="" port="" proxy="" server="" authtype="0" password="ncc" user="ncc" apn="ota" mnc="010" mcc="001" carrier="DefaultOTA"/><apn preferapp="" defaultflag="0" bearer="0" protocol="IP" type="default" mmsport="" mmsproxy="" mmsc="" port="" proxy="" server="" authtype="0" password="ncc" user="ncc" apn="internet" mnc="010" mcc="001" carrier="DefaultInternet"/><apn preferapp="" defaultflag="0" bearer="0" protocol="IP" type="dun" mmsport="" mmsproxy="" mmsc="" port="" proxy="" server="" authtype="0" password="ncc" user="ncc" apn="pam" mnc="010" mcc="001" carrier="DefaultPAM"/>

<!-- LTE TEST SIM APN END -->

 

<!-- LTE SPRINT REQ APN START -->

 

<!-- Sprint req change to ipv4 -->

<apn preferapp="" defaultflag="0" bearer="0" protocol="IP" type="fota" mmsport="" mmsproxy="" mmsc="" port="" proxy="" server="" authtype="0" password="" user="" apn="otasn" mnc="120" mcc="310" carrier="OTA"/>

<!-- LTE SPRINT REQ APN END -->

</apns>

 

 

I found this one for a sprint LG Optimus G

 

apns-conf.xml

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...