Jump to content

HTC ONE user thread


jegillis

Recommended Posts

4.3 rolling out to Sprint today. Tweeted out by Jason Mackenzie. If you aren't running a custom ROM check your update!

 

Update zip over at XDA

 

https://twitter.com/JasonMacHTC/status/385442295731875840

 

Sent from my HTCONE using Tapatalk 4

Updating over TD-LTE! :P

Link to comment
Share on other sites

I get GCI and it is correct. I have not seen PCi.

Cool cool, thanks for reporting back. PCI is the actual LTE serving cell ID. For us HTC folks we get the GCI and not PCI but Samsung, LG and I believe iPhone get PCI and not GCI. There is a very nice patch on CM that gives us HTC One folks both.

 

Actually, if I am rooted and on a stock rom, will it unroot me?

I'm not 100% sure but I don't think the update can/will even be applied because your bootloader is unlocked. The way it used to work is you had to oem lock first then you could apply. If you are NOT s-off, you'll have to do but that way if you want the updated radios. If you don't care about radios and aren't s-off, just flash the stock rooted rom once it's available.

 

Sent from my d3rpONE using Tapatalk 4

 

uploadfromtaptalk1380762704718.jpg

Link to comment
Share on other sites

Cool cool, thanks for reporting back. PCI is the actual LTE serving cell ID. For us HTC folks we get the GCI and not PCI but Samsung, LG and I believe iPhone get PCI and not GCI. There is a very nice patch on CM that gives us HTC One folks both.

 

 

I'm not 100% sure but I don't think the update can/will even be applied because your bootloader is unlocked. The way it used to work is you had to oem lock first then you could apply. If you are NOT s-off, you'll have to do but that way if you want the updated radios. If you don't care about radios and aren't s-off, just flash the stock rooted rom once it's available.

 

Sent from my d3rpONE using Tapatalk 4

I am rooted with S-Off on stock rom....OTA downloaded and installed correctly. Went to bootloader and verified that I am still rooted and s-off'd.

10062502065_a0ea909606_z_d.jpg10062595213_7ef608f778_z_d.jpg

  • Like 1
Link to comment
Share on other sites

Just an FYI with anybody S-OFF'd and custom ROM. If you are still running TWRP 2.5.0.0 (like I was), once you flash the firmware zip with fastboot containing everything but HBOOT, Recovery, and Boot, you will run into a unresponsive touchscreen. There is a new touchscreen update in the firmware. After flashing the firmware zip I rebooted back into bootloader to get into to recovery to flash OMJ's stock rooted. TWRP was unresponsive so I had to hold down power and vol down to get out of it. Booted system and it was unresponsive too. Had to again hold power and vol down til it quit flashing the home and back lights, let off and hold again to get back into bootloader. Downloaded TWRP 2.6.3.0, zipped it up and flashed through flashboot. Got back to recovery and now responsive.

 

tl;dr

 

Update TWRP before flashing firmware zip and ROM.

  • Like 2
Link to comment
Share on other sites

Same thing that's wrong with the new Google maps, Talk, Slacker, Sensorly, etc.. All going backwards.

Why do these apps need to be updated, even overhauled seemingly every 90 days? It is just change for the sake of change; newer must be better.

 

Just leave well enough alone for a couple of years...

 

AJ

Link to comment
Share on other sites

I think they have changed the signal bars to actually reflect eHRPD or LTE.

 

For instance, I'm sitting in my basement with 1 bar with a -86 1xRTT signal and a -112 LTE signal.

 

If i get my One to lose LTE signal and drop back to eHRPD, i've got 4 or 5 bars with a -86 eHRPD signal.

 

Anybody else notice this?

 

k5zy.png

 

e2p4.png

  • Like 1
Link to comment
Share on other sites

I think they have changed the signal bars to actually reflect eHRPD or LTE.

 

For instance, I'm sitting in my basement with 1 bar with a -86 1xRTT signal and a negative -112 LTE signal.

 

If i get my One to lose LTE signal and drop back to eHRPD, i've got 4 or 5 bars with a -86 eHRPD signal.

 

Anybody else notice this?

 

k5zy.png

 

e2p4.png

Interesting.... I switched to T-Mobile and I noticed that it does this also. When it's on LTE the bars show the strength of the LTE signal and not the GSM signal.
Link to comment
Share on other sites

Any of you that are noticing this with the bars, are you running OMJs ROM right now? I'm wondering if the Qualcom Location service FC'ing is the culprit.

 

Also people who are stock let me know your results if you are able to replicate.

 

Sent from my HTCONE using Tapatalk 4

 

Link to comment
Share on other sites

Just an FYI with anybody S-OFF'd and custom ROM. If you are still running TWRP 2.5.0.0 (like I was), once you flash the firmware zip with fastboot containing everything but HBOOT, Recovery, and Boot, you will run into a unresponsive touchscreen. There is a new touchscreen update in the firmware. After flashing the firmware zip I rebooted back into bootloader to get into to recovery to flash OMJ's stock rooted. TWRP was unresponsive so I had to hold down power and vol down to get out of it. Booted system and it was unresponsive too. Had to again hold power and vol down til it quit flashing the home and back lights, let off and hold again to get back into bootloader. Downloaded TWRP 2.6.3.0, zipped it up and flashed through flashboot. Got back to recovery and now responsive.

 

tl;dr

 

Update TWRP before flashing firmware zip and ROM.

And this is why I always take my time flashing any major release, thanks for the heads up bro.

  • Like 2
Link to comment
Share on other sites

Same thing that's wrong with the new Google maps, Talk, Slacker, Sensorly, etc.. All going backwards.

Crap! I forgot about maps....is there a way to go back to the old Maps app?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...