Jump to content

T-Mobile LTE & Network Discussion


CriticalityEvent

Recommended Posts

Thank you mr RF engineer. Please move this to another thread as it is irrelevant to this topic.

Well if you read thru the whole thread then you understand where the reference came from. I'm a trucker by day and Ham at night.

  • Like 2
Link to comment
Share on other sites

For CDMA it might be 50W. For a 5Mhz WCDMA channel:

 

"The radiated power of base stations is dependent on the cell size, the services offered, the number of simultaneous radio connections and the distribution of handsets within the cell. Today, for compatibility calculations, one assumes a maximum effective radiated power (ERP) of 300 - 400 W. Here again the average radiated power is well below this maximum value."

 

http://www.bakom.admin.ch/themen/technologie/01178/index.html?lang=en&download=NHzLpZeg7t,lnp6I0NTU042l2Z6ln1ad1IZn4Z2qZpnO2Yuq2Z6gpJCDdX12gmym162epYbg2c_JjKbNoKSn6A--

 

So let's say 50W per 1Mhz. For a 40MHz it is 50*40=2000W.

Link to comment
Share on other sites

For CDMA it might be 50W. For a 5Mhz WCDMA channel:

 

"The radiated power of base stations is dependent on the cell size, the services offered, the number of simultaneous radio connections and the distribution of handsets within the cell. Today, for compatibility calculations, one assumes a maximum effective radiated power (ERP) of 300 - 400 W. Here again the average radiated power is well below this maximum value."

 

http://www.bakom.admin.ch/themen/technologie/01178/index.html?lang=en&download=NHzLpZeg7t,lnp6I0NTU042l2Z6ln1ad1IZn4Z2qZpnO2Yuq2Z6gpJCDdX12gmym162epYbg2c_JjKbNoKSn6A--

 

So let's say 50W per 1Mhz. For a 40MHz it is 50*40=2000W.

Here I thought that CDMA2000 uses 20W transmissions.

 

As for WCDMA, each panel (transmitting 5 MHz channel) uses 60-80W transmissions with T-Mobile's modernized equipment. A three-panel arrangement for NSN modernized equipment used by T-Mobile is 240W, and three sectors of three panels is 720W.

Link to comment
Share on other sites

So I was reading on how AT&T is copying verizon (as always) and moving to a 24 month device renewal.

 

The comments, as per usual are "i hate them and want to go to t-mobile but tmobile coverage sucks" and "tmobile is great in the city but terrible in the country"

 

As I have zero experience with tmobile, I cant say if this is true or not.

 

I know the reason sprint has good coverage is due to roaming agreements.

 

Is tmobile doing anything to expand into rural areas, via new towers or roaming agreements?

Link to comment
Share on other sites

So I was reading on how AT&T is copying verizon (as always) and moving to a 24 month device renewal.

 

The comments, as per usual are "i hate them and want to go to t-mobile but tmobile coverage sucks" and "tmobile is great in the city but terrible in the country"

 

As I have zero experience with tmobile, I cant say if this is true or not.

 

I know the reason sprint has good coverage is due to roaming agreements.

 

Is tmobile doing anything to expand into rural areas, via new towers or roaming agreements?

 

Short answer. No. They will not work much on rural areas other than replacing defective legacy equipment on an one to one ratio or where population has expanded via sub-urbanization. Their major focus is converting their existing HSPA coverage areas to PCS & LTE. Their bread and butter is their urban customers and that's not going to change anytime soon as they're an extreme value carrier by heart. 

Link to comment
Share on other sites

Here I thought that CDMA2000 uses 20W transmissions.

 

As for WCDMA, each panel (transmitting 5 MHz channel) uses 60-80W transmissions with T-Mobile's modernized equipment. A three-panel arrangement for NSN modernized equipment used by T-Mobile is 240W, and three sectors of three panels is 720W.

Average ERP is much lower than 50. 50 is max for pretty much a saturated sector.

Link to comment
Share on other sites

Its could also be AWS. I hear that due to lower allowed transmission power it has a reduced coverage radius compared to PCS. AWS HSPA+ or LTE on their current rural sites with their PCS spacing would produce small coverage islands of AWS with customers constantly moving in and out of service on the highway.

 

PCS HSPA+, however should be pretty close to their current EDGE network coverage with the same number of sites.

 

I'm starting to think AWS UMTS was what was holding T-Mobile back from adding new high speed coverage along highways and in rural areas. I think with the PCS refarm we may see a widescale deployment in rural areas.

 

Nope, PCS and AWS share basically the same EIRP limits.

  • PCS:  base:  1640 W, 3280 W (county pop density < 100); mobile:  2 W
  • AWS:  base:  1640 W, 3280 W (county pop density < 100); mobile:  1 W
Furthermore, few, if any base stations actually hit those power limits.  And while AWS mobiles are limited to 3 dB lower EIRP than are PCS mobiles, nearly all CDMA2000, W-CDMA, and LTE devices do not output anything close to 1 W.  Most are limited to around 200 mW (23 dBm).  Thus, power limits are almost entirely non factors.
 
Compared to PCS, AWS does have slightly worse free space path loss on the downlink, and some have stated that AWS experiences considerably greater environmental attenuation on the downlink.  So, those could be limiting factors.
 
As for T-Mobile, it has started constructing AWS W-CDMA only coverage in some rural areas.  And we will not likely see any PCS W-CDMA only coverage or PCS W-CDMA only overlay on existing GSM coverage anytime soon because that would present two distinct problems.  T-Mobile would have to distinguish between AWS W-CDMA and PCS W-CDMA in its coverage maps.  And a huge chunk of T-Mobile's subs would not be able to utilize new or overlay PCS W-CDMA coverage in rural areas, as their devices do not support PCS W-CDMA.
 
As such, I return to the backhaul explanation.  Circa 2005-2008, I basically left T-Mobile for dead in ever legitimately getting back into the wireless data conversation.  Having to wait for the AWS auction in 2006, then obtain infrastructure and deploy nationwide, put T-Mobile about four years behind VZW and Sprint, to a lesser degree, AT&T.  I thought that would harm T-Mobile such that it would never catch up.  But, during that time, T-Mobile was able to connect advanced backhaul to many of its urban sites.  In that way, T-Mobile used its tardiness to leapfrog the other big three.  However, as is well known around these parts, T-Mobile focused almost exclusively on urban areas, leaving most rural and highway coverage in the GSM stone age.  Those sites did not receive advanced backhaul, and that is the big difference between T-Mobile and Network Vision enhanced Sprint.

 

I was really hoping that post would cause AJ to either confirm or rebuke my speculation.....

 

I would not go so far as to say rebuked.  But consider yourself rebutted.

 

;)

 

AJ

  • Like 4
Link to comment
Share on other sites

So I was reading on how AT&T is copying verizon (as always) and moving to a 24 month device renewal.

 

The comments, as per usual are "i hate them and want to go to t-mobile but tmobile coverage sucks" and "tmobile is great in the city but terrible in the country"

 

As I have zero experience with tmobile, I cant say if this is true or not.

 

I know the reason sprint has good coverage is due to roaming agreements.

 

Is tmobile doing anything to expand into rural areas, via new towers or roaming agreements?

 

But even in places where Sprint doesn't have a roaming agreement, I would say 95% of the time, Sprint will still have native EVDO whereas T-Mobile will have EDGE. 

Link to comment
Share on other sites

 

 

 

Given that Sprint is adding LTE to more than 38k sites, it's not a stretch to assume that tmobile will add AT LEAST HSPA+ to all 37k sites, right?

 

https://t-mobile.jive-mobile.com/#jive-document?content=/api/core/v2/documents/5736

 

 

 

"T-Mobile will be improving approximately 37,000 cell sites over the next 18 months. These upgrades include:

 

 

Replacing copper lines with fiber optic lines

 

Adding new radios

 

Moving ground equipment to the top of towers

 

Adding new antennas

 

 

These changes will provide improved voice and data coverage and a 20 percent improvement to indoor coverage."

 

 

How much more expensive is it to upgrade a site to include AWS LTE instead of just PCS HSPA+?

 

 

Yes, eventually. However, Sprint will have their network complete on all 37k sites before Tmo will. Heck, Sprint will have 800MHz CDMA and LTE fully deployed long before Tmo gets their network upgraded. I live next to a Tmo site with EDGE only service. The day they show up and upgrade that to even HSPA+ with appropriate backhaul, then I will be a believer. Until then, I consider it just talk that they are going to all their native sites with broadband wireless.

 

Robert

 

Why would they deploy fiber to their sites if they're not going to upgrade to HSPA+ at least?
Link to comment
Share on other sites

Why would they deploy fiber to their sites if they're not going to upgrade to HSPA+ at least?

 

Sites that get fiber will likely get upgraded to HSPA+.  I never said they wouldn't.  I just said it will happen eventually.

 

Robert

Link to comment
Share on other sites

 

 

Why would they deploy fiber to their sites if they're not going to upgrade to HSPA+ at least?

 

 

Sites that get fiber will likely get upgraded to HSPA+. I never said they wouldn't. I just said it will happen eventually.

 

Robert

As long as Tmobile gets at least 5x5 HSPA+ on every site by Jan 2015, I'll be happy.

I don't have high expectations.

 

"T-Mobile will invest a total of $4 billion over time into network modernization and LTE deployment. Over the next two years, this represents approximately $1.4 billion in incremental network investment"

http://newsroom.t-mobile.com/phoenix.zhtml?c=251624&p=irol-newsArticle_pf&ID=1805918&highlight=

 

They got $3bil cash from ATT breakup and $2.35bil from towers but they're only investing $1.4bil extra?

They deserve to fail.

Link to comment
Share on other sites

 

 

 

 

I wonder if that number didn't go up after the MetroPCS merger. I think most of that money would be going to urban areas.

 

 

Why would they deploy fiber to their sites if they're not going to upgrade to HSPA+ at least?

 

 

 

 

Sites that get fiber will likely get upgraded to HSPA+. I never said they wouldn't. I just said it will happen eventually.

 

 

 

Robert

As long as Tmobile gets at least 5x5 HSPA+ on every site by Jan 2015, I'll be happy.

 

I don't have high expectations.

 

 

 

"T-Mobile will invest a total of $4 billion over time into network modernization and LTE deployment. Over the next two years, this represents approximately $1.4 billion in incremental network investment"

 

http://newsroom.t-mobile.com/phoenix.zhtml?c=251624&p=irol-newsArticle_pf&ID=1805918&highlight=

 

 

 

They got $3bil cash from ATT breakup and $2.35bil from towers but they're only investing $1.4bil extra?

 

They deserve to fail.

I think that number for the network modernization investment went up with the metroPCS merger. Granted, most of that money is going to urban areas.

Link to comment
Share on other sites

Here I thought that CDMA2000 uses 20W transmissions.

 

As for WCDMA, each panel (transmitting 5 MHz channel) uses 60-80W transmissions with T-Mobile's modernized equipment. A three-panel arrangement for NSN modernized equipment used by T-Mobile is 240W, and three sectors of three panels is 720W.

 

Power usage != transmitted power. And radiated power isn't additive if it's facing in another direction, or out-of-band compared to what the phone is actually picking up.

Link to comment
Share on other sites

Tmo LTE is now active in many places in ABQ. I have been doing some Sensorly mapping today. I have been averaging in the high teens, occasionally hitting around 30Mbps. Pings between 40-70ms most of the time.

 

I hit this speed test on Montgomery near I-25. I've never even been this high on even Verizon before. It hit as high as 56Mbps before settling just under 50.

 

uploadfromtaptalk1371419444380.jpg

 

Robert from my Nexus 4 using Tapatalk 4 Beta

 

  • Like 3
Link to comment
Share on other sites

I think that's great for T-Mobile in Abq, but I never really had any problems with their hspa+ network, I was always very satisfied to get 3-5 mpbs, what wasn't great is dropping down to edge when you leave the city and losing any ability to use the internet.  I know it is talked on here like mad, but until T-Mobile upgrades rural sites it is just not something I am ever willing to go back to.

  • Like 3
Link to comment
Share on other sites

I think that's great for T-Mobile in Abq, but I never really had any problems with their hspa+ network, I was always very satisfied to get 3-5 mpbs, what wasn't great is dropping down to edge when you leave the city and losing any ability to use the internet. I know it is talked on here like mad, but until T-Mobile upgrades rural sites it is just not something I am ever willing to go back to.

 

I agree. Wholeheartedly. Tmo is just a thing I get to play with when I head into the city.

 

Robert from Note 2 using Tapatalk 4 Beta

 

 

Link to comment
Share on other sites

Tmo LTE is now active in many places in ABQ. I have been doing some Sensorly mapping today. I have been averaging in the high teens, occasionally hitting around 30Mbps. Pings between 40-70ms most of the time.

 

I hit this speed test on Montgomery near I-25. I've never even been this high on even Verizon before. It hit as high as 56Mbps before settling just under 50.

 

attachicon.gifuploadfromtaptalk1371419444380.jpg

 

Robert from my Nexus 4 using Tapatalk 4 Beta

Yup, ABQ is a 10Mhz market, I'm still trying to figure out if their LTE is A or F block there. Wish you've had a TouchWiz based phone, impossible to tell on a Nexus.  ;)

  • Like 1
Link to comment
Share on other sites

Yup, ABQ is a 10Mhz market, I'm still trying to figure out if their LTE is A or F block there. Wish you've had a TouchWiz based phone, impossible to tell on a Nexus.  ;)

Unless you can send commands to the baseband and query for the EARFCN for downlink.

  • Like 1
Link to comment
Share on other sites

Just saw these new panels put up. They don't look like any at&t or verizon I've ever seen. Is this t-mobile?

Definitely not T-Mobile's

Link to comment
Share on other sites

Tmo LTE is now active in many places in ABQ. I have been doing some Sensorly mapping today. I have been averaging in the high teens, occasionally hitting around 30Mbps. Pings between 40-70ms most of the time.

 

I hit this speed test on Montgomery near I-25. I've never even been this high on even Verizon before. It hit as high as 56Mbps before settling just under 50.

 

attachicon.gifuploadfromtaptalk1371419444380.jpg

 

Robert from my Nexus 4 using Tapatalk 4 Beta

Robert,

 

Are you running stock Andoid 4.2.2 or a different ROM?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • T-Mobile has saved its 28Mhz mmWave licenses by using the point to point method to do environment monitoring inside its cabinets. The attachment below shows the antennas used: https://wireless2.fcc.gov/UlsApp/ApplicationSearch/applAdmin.jsp;JSESSIONID_APPSEARCH=LxvbnJuvusmIklPhKy6gVK7f9uwylrZ8LiNf3BqIKlDp3_5GxoBr!300973589!225089709?applID=14787154#   Here are the sites for Franklin county OH: https://wireless2.fcc.gov/UlsEntry/attachments/attachmentViewRD.jsp?applType=search&fileKey=66518254&attachmentKey=21989782&attachmentInd=applAttach
    • Yep, there is a label on the side of the box but it doesn't provide any useful info that the city doesn't already provide (Crown Castle Solutions is the franchisee). You can see my graphical interpretation of the city's dataset here.
    • T-Mobile UScellular agreement links from SEC filings: https://www.sec.gov/ix?doc=/Archives/edgar/data/821130/000110465924065665/tm2415626d2_8k.htm Look inside for main link. Credit mdav-dos1 on reddit
    • Totally agree.  In my county and surrounding counties, TM did not place n-41 on every site.  When I look at the sites in question, I probably would have not placed it there either.  I can find just a few with n-71 only and in most of those cases if you live there and know the probable usage of the residents, you would not do a full upgrade on those sites.  One site in particular is set up to force feed n-71 through a long tunnel on the Turnpike.  No stopping allowed in the tunnel. No stores, movie theaters, bathrooms, so n41 would be a waste.    n25 is not really needed either, so it is not there.  The tunnel is going through & under a mountain with more black bears than people.  TM was smart.  Get good coverage in the tunnel but do not waste many many thousands of dollars with extra unused spectrum. I also see sites with only n71 & n25.  Again this makes sense to me.  Depending on what county we are talking about, they moved much of their b25 from LTE to nr.  Some counties have more n25 than a neighboring county, but luckily, it is plenty everywhere.   When you are in a very rural area, n41 can run up the bills and then be barely used.  I am NOT finding sites that should have had n41 but TM failed to provide it.  They may have to come back later in a few years and upgrade the site to n41.  However, we just may eventually see the last little piece on Band 25 leave LTE and move to n25. I am not sure if the satellite to phone service is using band 25 G block as LTE or nr. We also can possibly have at least some AWS move from LTE to nr at some point.  Yes, everybody wants n41. it is not justified in some cases.  When I travel, I desire some decent service along the entire route but it does not have to be 1 or 2 gig download.   If I can get 50/5 on a speedtest with data that will flow and not stutter, I am very happy. Yes, they will swap out the USC gear.  TM needs to match their existing network. The USCC equipment did the job for years, but it is time to retire it.
    • Lots of time if you can get close to the pole, you will see a sticky label on the box that is low enough to read. Most of the time it warns of RF exposure but also it may have a toll free number to call if there is an issue. Sometimes there is a power company meter with the name of the user. I would be surprised if there was nothing there to help identify it.  Thinking further, if this is multi-Tenant oDAS, then maybe you might only see some name like Crown Castle or maybe even a department in the city government.   An app on your phone may show the carrier(s)
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...