Jump to content

Network Vision/LTE - Charlotte Market


darnell89

Recommended Posts

At least one tower in Mooresville has been in progress for at least 3 weeks now. Eagerly awaiting the switch being flipped. Was in Charlotte last night also, and it seemed that I had to keep toggling airplane mode to get continuous lte, but when it flipped to 3g it was full signal. I could get 3 bars max of let though, in the same spot. This confuses me. I thought they were the same as far as building penetration.

Link to comment
Share on other sites

At least one tower in Mooresville has been in progress for at least 3 weeks now. Eagerly awaiting the switch being flipped. Was in Charlotte last night also, and it seemed that I had to keep toggling airplane mode to get continuous lte, but when it flipped to 3g it was full signal. I could get 3 bars max of let though, in the same spot. This confuses me. I thought they were the same as far as building penetration.

 

Remember, signal strength is ONLY for voice, not data. You can simultaneously be connected to one tower for 1X / 3G and another for LTE. There's another tower that's marked complete off 49 and 485 and I'm not convinced it's turned on. On a good note, it looks newly mapped areas on Sensorly include some of UNCC, IBM Drive, which ill be mapping more of, and it got really dark around Huntersville / Gilead Rd.

Link to comment
Share on other sites

Anybody seen LTE in clover? I assume this is part of the Charlotte market.

 

If you gain access to the Sponsor maps, you'll know. ;) I wouldn't know for sure until I can check tonight, as that one map fights to load at work. :rolleyes:

 

Well, I mapped Hwy 29 halfway between 485 & Mallard Creek all the way up to Harris Blvd., across I-85, and down IBM drive a bit. I can get a RSRP of -90 / -100dBm outside my building, but not inside where I sit. That's SO dissapointing. I hope it's not long before they light that tower up here.

Link to comment
Share on other sites

If you gain access to the Sponsor maps, you'll know. ;) I wouldn't know for sure until I can check tonight, as that one map fights to load at work. :rolleyes:

 

Well, I mapped Hwy 29 halfway between 485 & Mallard Creek all the way up to Harris Blvd., across I-85, and down IBM drive a bit. I can get a RSRP of -90 / -100dBm outside my building, but not inside where I sit. That's SO dissapointing. I hope it's not long before they light that tower up here.

 

I just noticed today that IBM drive and harris & 85 were on the map. I work at the Wells Fargo CIC building right there and still have no 4G, the closest 4G I've gotten to here is up 49 near 485, and a faint signal at my house. I really need them to get LTE up and running strong in my bldg, the slow 3G speeds are killing me!

Link to comment
Share on other sites

I just noticed today that IBM drive and harris & 85 were on the map. I work at the Wells Fargo CIC building right there and still have no 4G, the closest 4G I've gotten to here is up 49 near 485, and a faint signal at my house. I really need them to get LTE up and running strong in my bldg, the slow 3G speeds are killing me!

 

I work there as well, although I guess that's pretty obvious from the map. :lol: I took a walk around the building this morning and you can catch it at least out front of 2 and 3 East, speeds are decent for the distance from the Mallard Creek / I-85 tower too, about 3-4Mbps down and 2-3 up. Shoot me a PM if you want to chat on Lync. If you have an EVO, you'll have to toggle airplane mode to catch it, most likely, which is ridiculous. :rolleyes: The tower behind CIC is getting killed because you have all the old IBM buildings on the other side of the creek, probably a couple thousand people in our building with Sprint (at least), Hewitt Associates, the apartments behind that, all the kiddies at Vance High, and all the people on I-85 clobbering it all day.

 

I had the urge to get out of the building and go to Shanes Rib Shack today, so I mapped a bit more over by Hwy 29, Harris, McCullough Dr, and over in the University City area out of boredom.

Link to comment
Share on other sites

I'll have to walk around the outside of the bldg. and see if I can pick up some signal there. I worn in 3A2 and only get 3G here, and I got a great wimax signal when I had my old EVO 4G. I have a Galaxy SIII so I won't need to toggle airplane mode thank goodness. But I'll be reporting back as soon as I get LTE at my desk, and what a glorious day it will be.

Link to comment
Share on other sites

I've now gotten LTE completely in the Elizaabeth area near the hospital and all the way over to outside my office on East Hawthorne in Plaza Midwood area.. I wonder when more sites are lit up in uptown whether Sprint will announce that Charlotte is a live city.. Maybe they have to get all of the interstates through town active???

  • Like 2
Link to comment
Share on other sites

I've now gotten LTE completely in the Elizaabeth area near the hospital and all the way over to outside my office on East Hawthorne in Plaza Midwood area.. I wonder when more sites are lit up in uptown whether Sprint will announce that Charlotte is a live city.. Maybe they have to get all of the interstates through town active???

 

Nice! Keep in mind, a market has to be 40-50% complete before Sprint will think about announcing it. They need to get more towers along the interstates and major roads lit up before they go doing that. As of 2/12, Charlotte is 24% done, although that number is probably closer to 25-30% now. They keep lighting up towers JUST out of reach of my house AND work! BAH! :lol:

 

On another positive note, Charlotte had the 2nd most updated towers on the NV Complete Sites map today at 83! :o

  • Like 3
Link to comment
Share on other sites

Excellent! I see you mapped it on Sensory, or perhaps someone else did. It's a shame that LTE has been accepted at the SE/SW Hickory and Newton, NC towers, but it isn't live yet. I'm having horrible issues with connecting to 3G/EVDO in Hickory. All I get on my EVO LTE is a 3G indicator with a stuck ^ up arrow indicator. It will not connect until I get to a legacy tower. It's really irritating.

Link to comment
Share on other sites

3G is killing me. I use the maps app and navigation a lot even though I've been in CLT for 20 years. With 3G and good signal it still doesn't load the route info. With LTE and low signal it loads fast (2-3 seconds). I can't wait until all the towers are complete in Charlotte, and I'm hoping majority of the country is off 3G by the end of 2014.

  • Like 1
Link to comment
Share on other sites

Guest VestaviaPirate

How far south down S. Mint do you think the 4G reaches?

 

I live in Elizabeth now, and the 4G seems to be inching closer to my actual house everyday. I loose it about 100 yards from my door! :(

 

Now that I'm moving to Southend/Wilmore, I see the strong signal near the 77/277 interchange, but it seems to die pretty quickly... leading me to believe no one has explored/mapped that area yet.

 

Is this correct? :rolleyes:

Link to comment
Share on other sites

Excellent! I see you mapped it on Sensory, or perhaps someone else did. It's a shame that LTE has been accepted at the SE/SW Hickory and Newton, NC towers, but it isn't live yet. I'm having horrible issues with connecting to 3G/EVDO in Hickory. All I get on my EVO LTE is a 3G indicator with a stuck ^ up arrow indicator. It will not connect until I get to a legacy tower. It's really irritating.

 

I did. I'll try to map more over the next couple of days. My 3G has been absolutely horrible up until yesterday, Not only has 4G started to appear but 3G speeds are much better.

  • Like 1
Link to comment
Share on other sites

Dumb question here.

 

How the heck are you finding the LTE in Charlotte. The last time I was up there. I turned on LTE and never got a signal. And I was everywhere, South Park to Uptown to Concord.

 

Thanks.

 

Sent from my Samsung Galaxy S3 using Tapatalk 2

 

 

Link to comment
Share on other sites

Dumb question here.

 

How the heck are you finding the LTE in Charlotte. The last time I was up there. I turned on LTE and never got a signal. And I was everywhere, South Park to Uptown to Concord.

 

Thanks.

 

Sent from my Samsung Galaxy S3 using Tapatalk 2

 

When were you last up here? It's on and live most everywhere that we've mapped it on the Sensorly maps . Seems like it was turned off and on a couple times after people mapped CERTAIN towers, but that doesn't seem to be the case anymore for the most part with the exception of Bill having accepted towers in Hickory/Newton and not finding it. We need more info to possibly help you. :) You shouldn't have to cycle airplane mode since you have a SGS3.

Link to comment
Share on other sites

Finally! got an LTE signal at the Arboretum today for the first time. It was pathetic, speed-wise, but at least it was there.

 

Robert, should we see speeds increase as Sprint completes the roll-out? My Nexus 4 on TMO still kills Sprint's LTE speeds 9 times out of 10.

Link to comment
Share on other sites

Finally! got an LTE signal at the Arboretum today for the first time. It was pathetic, speed-wise, but at least it was there.

 

Robert, should we see speeds increase as Sprint completes the roll-out? My Nexus 4 on TMO still kills Sprint's LTE speeds 9 times out of 10.

 

How strong was your LTE signal in RSRP? In my experience in Wichita Falls, Sprint LTE slaughtered Tmo HSPA+ and left it bleeding to death in the corner. I averaged 29Mbps on Sprint LTE, 18Mbps on Verizon LTE and 11Mbps on Tmo HSPA+ testing in fully deployed areas in my field testing.

 

Charlotte is nowhere even close to fully deployed. LTE performance is very closely tied to signal strength, and most Sprint devices do not show LTE signal strength in bars. You need to find out your RSRP. More info here: http://s4gru.com/index.php?/topic/2040-bars-lie-for-lte-signal-strength-how-to-determine-your-actual-lte-signal-strength/

 

Robert via Nexus 7 with Tapatalk HD

Link to comment
Share on other sites

I was up in Charlotte last in the first week of February. Nothing ever showed up.

 

Sent from my Samsung Galaxy S3 using Tapatalk 2

 

Probably a stupid question, but are you sure you're in CDMA/LTE mode? Make sure you're not in CDMA only mode... because that'd give you Turretts looking for 4G while there's a deployment going on. :lol:

Link to comment
Share on other sites

 

Probably a stupid question, but are you sure you're in CDMA/LTE mode? Make sure you're not in CDMA only mode... because that'd give you Turretts looking for 4G while there's a deployment going on. :lol:

 

Yes, I did switch over to that.

 

Sent from my Samsung Galaxy S3 using Tapatalk 2

 

 

Link to comment
Share on other sites

When were you last up here? It's on and live most everywhere that we've mapped it on the Sensorly maps . Seems like it was turned off and on a couple times after people mapped CERTAIN towers, but that doesn't seem to be the case anymore for the most part with the exception of Bill having accepted towers in Hickory/Newton and not finding it. We need more info to possibly help you. :) You shouldn't have to cycle airplane mode since you have a SGS3.

The other thing is are his settings on network correct??? need to be sure it is set to receive LTE as some earlier model GS3 were set to CDMA only... Going a certain way to work from my apt to office, I can be LTE all the way!!! I think when they fill in the LTE along I77 closer to uptown, Sprint will officially launch...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...