sensorly Posted October 30, 2012 Author Share Posted October 30, 2012 While it looks like the app surely collects info while it is running, if you switch to any other app or even press Home, it looks like it stops collecting data and is even sometimes killed. This prevents me from playing music or using navigation and still mapping while I drive automatically. That's what "Map trip" is for : start the app, go to map trip, press start. Then when you exit the app, it keeps running. You're notified by the icon in the status bar. 1 Link to comment Share on other sites More sharing options...
sensorly Posted October 30, 2012 Author Share Posted October 30, 2012 Just noticed some Grey areas near purple. Not lite purple, and but Grey. What is this? Look near santa Clara ca. Areas where an LTE phone is reporting not being connected to LTE Link to comment Share on other sites More sharing options...
sensorly Posted October 30, 2012 Author Share Posted October 30, 2012 The RootMetrics app works on both iOS and Android and let's you test signal only or signal+data, so it IS possible. Yeah and everytime we ask Apple they say we can't. Go figure. Link to comment Share on other sites More sharing options...
modplan Posted October 30, 2012 Share Posted October 30, 2012 That's what "Map trip" is for : start the app, go to map trip, press start. Then when you exit the app, it keeps running. You're notified by the icon in the status bar. Exactly. The whole point of my posts was that I would like the addition of a setting that forced "map trip" to start automatically and immediately when the app was launched. This would allow me to make a profile to start the app when my phone was docked and have it constantly tracking without ANY user intervention while I drive across the country. Link to comment Share on other sites More sharing options...
sensorly Posted October 30, 2012 Author Share Posted October 30, 2012 Exactly. The whole point of my posts was that I would like the addition of a setting that forced "map trip" to start automatically and immediately when the app was launched. This would allow me to make a profile to start the app when my phone was docked and have it constantly tracking without ANY user intervention while I drive across the country. Ok, I understand. Did you install the latest version ? That version should always start collecting data when you dock the phone. If not, can you please email us at contact@... so we can work this out ? Link to comment Share on other sites More sharing options...
modplan Posted October 30, 2012 Share Posted October 30, 2012 Ok, I understand. Did you install the latest version ? That version should always start collecting data when you dock the phone. If not, can you please email us at contact@... so we can work this out ? I've tried the latest, no dice. I'll shoot an email, thanks. Link to comment Share on other sites More sharing options...
Mutiny32 Posted October 31, 2012 Share Posted October 31, 2012 So, you should totally update that list at the beginning of the thread; I think I hit a new high score. 63,839 data points (combined) in the past 31 days. Oh, and the 2.1.10B2 showing signal when tapping on the map is now working great! Link to comment Share on other sites More sharing options...
tommym65 Posted October 31, 2012 Share Posted October 31, 2012 Oh, and the 2.1.10B2 showing signal when tapping on the map is now working great! Where/when/how did you get 2.1.10B2? This version doesn't show upon their web site, nor does my GS3 show an available update. Link to comment Share on other sites More sharing options...
MNCL Posted November 4, 2012 Share Posted November 4, 2012 I live in puerto rico and i can't see the sensorly.com coverage map with my normal IP but if i tether from my phone (US-IP) i see the website without problems Link to comment Share on other sites More sharing options...
DaQue Posted November 4, 2012 Share Posted November 4, 2012 Not sure what does that but I had a problem with a site that would show up on the free wifi at home but not on the phone. Still does it just checked www.emcu.it It must be DNS related for me cause when I set my computer to use google dns 8.8.8.8 it will then load it while tethered. Not sure how to set a dns on the phone Link to comment Share on other sites More sharing options...
Virtualbot Posted November 4, 2012 Share Posted November 4, 2012 Not sure what does that but I had a problem with a site that would show up on the free wifi at home but not on the phone. Still does it just checked www.emcu.it It must be DNS related for me cause when I set my computer to use google dns 8.8.8.8 it will then load it while tethered. Not sure how to set a dns on the phone From the Home Screen > Menu (button) > Settings > Wi-Fi > Pick the Network (access point) you want > When you go to enter password, there is an option for "Show advanced options", checkmark that option > Choose "Static" from the IP Settings dropbox > Scroll down to DNS1 and enter 8.8.8.8 . 1 Link to comment Share on other sites More sharing options...
DaQue Posted November 4, 2012 Share Posted November 4, 2012 Thanks but I want to change the DNS I use while on 3G/LTE not on wifi. Link to comment Share on other sites More sharing options...
Ascertion Posted November 4, 2012 Share Posted November 4, 2012 Thanks but I want to change the DNS I use while on 3G/LTE not on wifi.that's out of your control. It's on Sprints side. Sent from my SPH-L710 using Tapatalk 2 Link to comment Share on other sites More sharing options...
DaQue Posted November 5, 2012 Share Posted November 5, 2012 I bow to our tyrant overlords Link to comment Share on other sites More sharing options...
EndlessDissent Posted November 5, 2012 Share Posted November 5, 2012 Thanks but I want to change the DNS I use while on 3G/LTE not on wifi. that's out of your control. It's on Sprints side. Sent from my SPH-L710 using Tapatalk 2 Actually, you can change the DNS for all network activity. It just requires you to be rooted and that you add a few lines to the build.prop. http://aokp.co/?showtopic=113 1 Link to comment Share on other sites More sharing options...
rwong48 Posted December 13, 2012 Share Posted December 13, 2012 I uploaded a bunch of results today (12-15 hours ago), but they haven't appeared on Sensorly as quickly as they usually do. Anyone else seeing this issue? I'm uploading another few thousand as I type this. Don't want them getting lost.. Link to comment Share on other sites More sharing options...
rwong48 Posted December 13, 2012 Share Posted December 13, 2012 (edited) I uploaded a bunch of results today (12-15 hours ago), but they haven't appeared on Sensorly as quickly as they usually do. Anyone else seeing this issue? I'm uploading another few thousand as I type this. Don't want them getting lost.. Alright, points I've uploaded ~24 hours ago are up, but not the ones from 12-15 (again, coincidentally) hours ago. Think it's just a huge delay. Edit: now those are up Edit2: and now my most recent set of points appeared almost immediately. Edited December 13, 2012 by rwong48 Link to comment Share on other sites More sharing options...
kg4icg Posted December 14, 2012 Share Posted December 14, 2012 My updates usually go thru in about a hour or 2 when I map new points. Sent from my SPH-L710 using Tapatalk 2 Link to comment Share on other sites More sharing options...
sensorly Posted December 17, 2012 Author Share Posted December 17, 2012 Hi, Indeed, we weren't updating maps for a about a day and then the servers caught back up in the next couple hours. Let us know if you see anything missing. 1 Link to comment Share on other sites More sharing options...
Rickie546 Posted December 17, 2012 Share Posted December 17, 2012 Hi, Indeed, we weren't updating maps for a about a day and then the servers caught back up in the next couple hours. Let us know if you see anything missing. Sensorly, When ever a new tower comes online and makes a stronger signal in an area that use to have weak signal, why does the stronger signal not overtake the weaker on the map?? thanks! Rickie Link to comment Share on other sites More sharing options...
sensorly Posted December 17, 2012 Author Share Posted December 17, 2012 When we get multiple readings in the same area, we average them. So if lots and lots of readings were made in an area, it may take a little while to increase the average. We're going to improve that in 2013. 1 Link to comment Share on other sites More sharing options...
Rickie546 Posted December 17, 2012 Share Posted December 17, 2012 When we get multiple readings in the same area, we average them. So if lots and lots of readings were made in an area, it may take a little while to increase the average. We're going to improve that in 2013. Alright ill keep mapping it whenever i go by there Thanks! Link to comment Share on other sites More sharing options...
jamesinclair Posted December 19, 2012 Share Posted December 19, 2012 Sensorly, why did the "grey" feature go away? That is, previously if you mapped wimax, it showed purple, and if wimax fell, it would map grey (for mapped, but no wimax). Now, new wimax and new LTE simply show no mapping in areas with no signal. Link to comment Share on other sites More sharing options...
EvoMania Posted December 19, 2012 Share Posted December 19, 2012 Sensorly, why did the "grey" feature go away? That is, previously if you mapped wimax, it showed purple, and if wimax fell, it would map grey (for mapped, but no wimax). Now, new wimax and new LTE simply show no mapping in areas with no signal. Yeah, that was a better way. It lets you know if someone has mapped that area or not. Instead of guessing if you could get coverage there you know that the signal was lost. 1 Link to comment Share on other sites More sharing options...
sensorly Posted December 23, 2012 Author Share Posted December 23, 2012 Sensorly, why did the "grey" feature go away? That is, previously if you mapped wimax, it showed purple, and if wimax fell, it would map grey (for mapped, but no wimax). Now, new wimax and new LTE simply show no mapping in areas with no signal. It's there but doesn't work well with CDMA voice networks. We're trying to get it to work. If you look at GSM maps, you will see a little. Link to comment Share on other sites More sharing options...
Recommended Posts