Jump to content

Coverage map updated 3/9/2018


Recommended Posts

At least for the Cleveland area, it seems like there's more "holes" showing up on the coverage map, which I think is more accurate.  And hopefully this is a step to them fixing the holes.

  • Like 1
Link to comment
Share on other sites

That's not all; I note some of the newer Shentel coverage--which was found in a previous version of the map--is now missing.  Not sure how that happened.

There are also individual LTE Plus towers missing in the DC area--some are Clear sites that have been there a very long time.

That said, since the last time I looked at coverage in this area, the map has gotten more accurate.  It now shows holes that I know exist because I travel through them on a regular basis. 

- Trip

  • Like 1
Link to comment
Share on other sites

3 hours ago, Paynefanbro said:

LTE Plus coverage is broken in NYC again. A lot of the city is lacking it on the map when most of the city is covered in it.

If you’re aware of specific locations in NYC that are wrong on the coverage map, you should post them in the Sprint Subreddit Coverage Map thread and tag /u/Craig-S who interfaces with the Map Team. He does a great job following up on this stuff.

  • Like 1
Link to comment
Share on other sites

1 hour ago, RedSpark said:

Where in the territory?

Central Pennsylvania -  Harrisburg, York, Carlisle, Chambersburg, Waynesboro.

Maryland -  Hagerstown

West Virginia -  Martinsburg   

Probably more than I mentioned.  Does not look like any Shentel data has been upgraded for a long time. That is a shame

since the service is great. The mapping should reflect that, but it does not.

  • Like 1
Link to comment
Share on other sites

They really broke the Missouri market. Looks like they turned off Band 26 again. And it looks like they tried to make B41 coverage more realistic, but in the process, shrank it *too* much. Previously it covered way too much ground. Now they're not showing coverage where I know there is a pretty decent B41 (3xCA) signal. 

  • Like 1
Link to comment
Share on other sites

I do think it is over conservative for a lot of the Cleveland Market, actually.  Basically any site that has received B41 since the beginning of 2017 is not showing on the map.

Another couple map updates, and we'll be right back to the Cleveland area having hardly any B41. GRR! :mad:

  • Like 3
Link to comment
Share on other sites

1 hour ago, red_dog007 said:

https://rf.jwmaloney.name/sprint-coverage.html

 

If I select 3G & More and LTE Plus (No 3G) I see lot more B41 coverage.  The two B41 towers that are new near me are shown.  Manhattan is shown correctly. Shentel B41 is shown. The B41 I saw in Huntsville is shown.

Great Find concerning the Shentel LTE Plus Coverage. The jwMaloney maps even show the difference between inside and outside LTE Plus coverage.  You now have one vote for making the jwmaloney maps the official Sprint Maps.

The B-41 coverage shown on the Maloney maps appears to be fairly accurate too. 

How can the Sprint managers see these jwmaloney maps and then look at the official Sprint maps and feel good about their products they place out for public consumption?

Link to comment
Share on other sites

5 hours ago, red_dog007 said:

https://rf.jwmaloney.name/sprint-coverage.html

 

If I select 3G & More and LTE Plus (No 3G) I see lot more B41 coverage.  The two B41 towers that are new near me are shown.  Manhattan is shown correctly. Shentel B41 is shown. The B41 I saw in Huntsville is shown.

 

It's not accurate everywhere.  It's says now that nearly every site in Nebraska has B41 live on it.  Even in rural GMO and microwave sites.  And it's not true.  

Link to comment
Share on other sites

3 hours ago, S4GRU said:

It's not accurate everywhere.  It's says now that nearly every site in Nebraska has B41 live on it.  Even in rural GMO and microwave sites.  And it's not true.  

Not to mention, many NEW Nebraska sites, many in BFE towns...

Link to comment
Share on other sites

I was looking at LA and San Diego on the new map and was somewhat shocked. The amount of 3G only/roaming spots in some of the densest parts of LA seems hard to believe. Are there any folks down in LA that can confirm that this is accurate?

 

Thanks!

coverage.png

Link to comment
Share on other sites

23 minutes ago, Thomas L. said:

I was looking at LA and San Diego on the new map and was somewhat shocked. The amount of 3G only/roaming spots in some of the densest parts of LA seems hard to believe. Are there any folks down in LA that can confirm that this is accurate?

 

Thanks!

coverage.png

That's their attempt to show in building coverage. 

Link to comment
Share on other sites

35 minutes ago, Thomas L. said:

I was looking at LA and San Diego on the new map and was somewhat shocked. The amount of 3G only/roaming spots in some of the densest parts of LA seems hard to believe. Are there any folks down in LA that can confirm that this is accurate?

 

Thanks!

coverage.png

 

11 minutes ago, Dkoellerwx said:

That's their attempt to show in building coverage. 

They have done this in downtown Seattle too and I think it’s stupid. It makes coverage look completely awful. 

Link to comment
Share on other sites

12 hours ago, chamb said:

Great Find concerning the Shentel LTE Plus Coverage. The jwMaloney maps even show the difference between inside and outside LTE Plus coverage.  You now have one vote for making the jwmaloney maps the official Sprint Maps.

The B-41 coverage shown on the Maloney maps appears to be fairly accurate too. 

How can the Sprint managers see these jwmaloney maps and then look at the official Sprint maps and feel good about their products they place out for public consumption?

At least they're finally using Google Maps officially now. No excuse for not making that change years ago.

  • Like 1
Link to comment
Share on other sites

15 hours ago, RAvirani said:

 

They have done this in downtown Seattle too and I think it’s stupid. It makes coverage look completely awful. 

So this isn't a map-wide change? Are they just doing this is downtown areas? It makes it hard to figure out exactly what they're trying to show with all the changes and when they don't tell you!

Link to comment
Share on other sites

3 minutes ago, Thomas L. said:

So this isn't a map-wide change? Are they just doing this is downtown areas? It makes it hard to figure out exactly what they're trying to show with all the changes and when they don't tell you!

They've been doing it on a market by market basis in urban areas. Like, I noticed it in the Kansas market late last year. They just added it to the Colorado market in last months update. They only seem to do it for the biggest cities, largest buildings and surrounding areas. 

Link to comment
Share on other sites

They've done it all over NYC, not just the densest areas. For what it's worth, the areas where it says there is no coverage or just 3G are mostly correct. However, they are missing a ton of Band 41 coverage that exists in these giant bright yellow patches. I'm hoping all of the complaints will make Sprint fix it soon.

gaGXto2.png

  • Like 2
Link to comment
Share on other sites

Just thinking but I would imagine having a super accurate map like this, while potentially being bad because it looks like you have poor coverage, could be good for when VoLTE comes around. You'll have a better idea of which areas VoLTE won't work or will struggle in.

  • Like 2
Link to comment
Share on other sites

22 hours ago, Paynefanbro said:

They've done it all over NYC, not just the densest areas. For what it's worth, the areas where it says there is no coverage or just 3G are mostly correct. However, they are missing a ton of Band 41 coverage that exists in these giant bright yellow patches. I'm hoping all of the complaints will make Sprint fix it soon.

gaGXto2.png

I would consider all of NYC to be dense... more dense that most of the other areas I was talking about in previous posts. So I stand by the point that they are doing this to dense urban areas. 

Link to comment
Share on other sites

On 3/12/2018 at 2:11 AM, JWMaloney said:

At least they're finally using Google Maps officially now. No excuse for not making that change years ago.

Agreed. Glad they made this transition to Google Maps for the Coverage Map.

When you Report a Network Issue in the My Sprint Mobile App for iOS, Sprint actually uses Apple Maps.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • T-Mobile has saved its 28Mhz mmWave licenses by using the point to point method to do environment monitoring inside its cabinets. The attachment below shows the antennas used: https://wireless2.fcc.gov/UlsApp/ApplicationSearch/applAdmin.jsp;JSESSIONID_APPSEARCH=LxvbnJuvusmIklPhKy6gVK7f9uwylrZ8LiNf3BqIKlDp3_5GxoBr!300973589!225089709?applID=14787154#   Here are the sites for Franklin county OH: https://wireless2.fcc.gov/UlsEntry/attachments/attachmentViewRD.jsp?applType=search&fileKey=66518254&attachmentKey=21989782&attachmentInd=applAttach
    • Yep, there is a label on the side of the box but it doesn't provide any useful info that the city doesn't already provide (Crown Castle Solutions is the franchisee). You can see my graphical interpretation of the city's dataset here.
    • T-Mobile UScellular agreement links from SEC filings: https://www.sec.gov/ix?doc=/Archives/edgar/data/821130/000110465924065665/tm2415626d2_8k.htm Look inside for main link. Credit mdav-dos1 on reddit
    • Totally agree.  In my county and surrounding counties, TM did not place n-41 on every site.  When I look at the sites in question, I probably would have not placed it there either.  I can find just a few with n-71 only and in most of those cases if you live there and know the probable usage of the residents, you would not do a full upgrade on those sites.  One site in particular is set up to force feed n-71 through a long tunnel on the Turnpike.  No stopping allowed in the tunnel. No stores, movie theaters, bathrooms, so n41 would be a waste.    n25 is not really needed either, so it is not there.  The tunnel is going through & under a mountain with more black bears than people.  TM was smart.  Get good coverage in the tunnel but do not waste many many thousands of dollars with extra unused spectrum. I also see sites with only n71 & n25.  Again this makes sense to me.  Depending on what county we are talking about, they moved much of their b25 from LTE to nr.  Some counties have more n25 than a neighboring county, but luckily, it is plenty everywhere.   When you are in a very rural area, n41 can run up the bills and then be barely used.  I am NOT finding sites that should have had n41 but TM failed to provide it.  They may have to come back later in a few years and upgrade the site to n41.  However, we just may eventually see the last little piece on Band 25 leave LTE and move to n25. I am not sure if the satellite to phone service is using band 25 G block as LTE or nr. We also can possibly have at least some AWS move from LTE to nr at some point.  Yes, everybody wants n41. it is not justified in some cases.  When I travel, I desire some decent service along the entire route but it does not have to be 1 or 2 gig download.   If I can get 50/5 on a speedtest with data that will flow and not stutter, I am very happy. Yes, they will swap out the USC gear.  TM needs to match their existing network. The USCC equipment did the job for years, but it is time to retire it.
    • Lots of time if you can get close to the pole, you will see a sticky label on the box that is low enough to read. Most of the time it warns of RF exposure but also it may have a toll free number to call if there is an issue. Sometimes there is a power company meter with the name of the user. I would be surprised if there was nothing there to help identify it.  Thinking further, if this is multi-Tenant oDAS, then maybe you might only see some name like Crown Castle or maybe even a department in the city government.   An app on your phone may show the carrier(s)
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...