Jump to content

SignalCheck - Android app to monitor your Wi-Fi/2G/3G/4G LTE/5G-NR signal strengths


mikejeep

Recommended Posts

Mike, found a bug, I'm on the main network but my 1x says I'm on my Airave 3. Would you like a diagnostic?

Sure, never hurts.. were you connected to an Airave 3 at one point then handed off to the main network?

 

 

ive enabled mobile IP address display but it will not show on the nexus 5X. weird.

Do you have an active mobile data connection (not on Wi-Fi)? Send a diagnostic, I'll take a peek!

 

-Mike

Link to comment
Share on other sites

Sure, never hurts.. were you connected to an Airave 3 at one point then handed off to the main network?

 

 

 

Do you have an active mobile data connection (not on Wi-Fi)? Send a diagnostic, I'll take a peek!

 

-Mike

Diagnostic sent. I actually just noticed it today, I'm 30 min from home so I am pretty sure it's not getting a signal. I have an Airave 3 at home.

 

Sent from my SM-G955U using Tapatalk

  • Like 1
Link to comment
Share on other sites

Looking for a hand from my faithful followers.. Android has an online bug tracker that helps sort out issues with the OS. Users can "vote" for issues by giving them a 'star' which helps bring them to the attention of the important powers that be...

Done.

 

And if appropriate and/or possible, for your consideration, a feature request:

 

Verizon is starting to deploy LTE on band 5.  Was wondering if it's possible to add an audio alert similar to the Sprint 1X 800 alert but triggered when Verizon band 5 LTE is detected?

  • Like 2
Link to comment
Share on other sites

yup, tried lte and 3g.  report sent.

 

I saw the report, but you have logcat output disabled in your settings.. please enable it under General Settings, let a few signal updates come through, and try again. Hard for me to see any error messages without that.. sorry!

 

 

Verizon is starting to deploy LTE on band 5.  Was wondering if it's possible to add an audio alert similar to the Sprint 1X 800 alert but triggered when Verizon band 5 LTE is detected?

 

I am working on completely overhauling the Alerts; one of the improvements will be the ability to set them up for any bands/providers you choose. SignalCheck has come a long way from the Sprint-centric Network Vision-tracking app it started as in 2012!

 

-Mike

  • Like 7
Link to comment
Share on other sites

I saw the report, but you have logcat output disabled in your settings.. please enable it under General Settings, let a few signal updates come through, and try again. Hard for me to see any error messages without that.. sorry!

 

 

 

I am working on completely overhauling the Alerts; one of the improvements will be the ability to set them up for any bands/providers you choose. SignalCheck has come a long way from the Sprint-centric Network Vision-tracking app it started as in 2012!

 

-Mike

Even for Sprint users, the ability to set an alert to a specific earfcn (or several) would be quite welcome. Ideally this would also include neighbors. This would allow us to be notified when near a small cell or forth or fifth b41 carrier. Alternatively alerts for any exceptions might also be welcome.

 

Sent from my LG-LS997 using Tapatalk

  • Like 2
Link to comment
Share on other sites

I saw the report, but you have logcat output disabled in your settings.. please enable it under General Settings, let a few signal updates come through, and try again. Hard for me to see any error messages without that.. sorry!

 

 

Okay sent again!  sorry.

  • Like 1
Link to comment
Share on other sites

ive enabled mobile IP address display but it will not show on the nexus 5X.  weird.

 

For the benefit of everyone else, I figured this out with swintec's help -- it's a bug! If you do not have the timestamp display or Location Service enabled, the IP will never appear. I'll have a fix in the next update.

 

-Mike

  • Like 6
Link to comment
Share on other sites

You sent me quite a bit! I've filled in a lot of blanks today from numerous sources, S4GRU and otherwise. AT&T is fully handled as of now. Got some solid T-Mobile info through an old friend that will help clean things up significantly. caspar347 hooked me up with fantastic Verizon info, but I'm still trying to figure out more. I have conflicting information on their Band 5 sectors, and I'm lacking information on DAS or other non-macro sites if you or anyone else have anything to share..?

 

-Mike

you sir have an amazing application. I actually like that you're able to make it display the frequencies the phone uses when it connects to LTE. Keep up the great work I appreciate your hard work:-)
  • Like 9
Link to comment
Share on other sites

I like the addition of the location button (HERE) in the site notes but I have found it was not very useful while on the freeway.  On a recent trip, I would drive past a tower and click the "HERE" button but of course it could not find a full address.

 

Would it be possible to have it enter just the GPS coordinates in the site notes?  I then could go back later and and update the site note using my computer.

  • Like 1
Link to comment
Share on other sites

I like the addition of the location button (HERE) in the site notes but I have found it was not very useful while on the freeway.  On a recent trip, I would drive past a tower and click the "HERE" button but of course it could not find a full address.

 

Would it be possible to have it enter just the GPS coordinates in the site notes?  I then could go back later and and update the site note using my computer.

 

Hmm.. that's easy to implement from a technical standpoint, but I'm not sure of the best way to add it to the UI. Did you have something in mind? I can't add a fourth button to the Site Note popup (3 is max), but I could add an option under Preferences to have it populate coordinates instead of the address every time. Would that still be useful, or do you like the address to be displayed on most occasions?

 

EDIT: Would adding an option to have the coordinates added to the geocoded address -- for example, "[40.1234, -70.9876] 123 Main Street, Boston" work for you?

 

-Mike

Edited by mikejeep
  • Like 1
Link to comment
Share on other sites

Hmm.. that's easy to implement from a technical standpoint, but I'm not sure of the best way to add it to the UI. Did you have something in mind? I can't add a fourth button to the Site Note popup (3 is max), but I could add an option under Preferences to have it populate coordinates instead of the address every time. Would that still be useful, or do you like the address to be displayed on most occasions?

 

-Mike

Don't forget the coordinates would be in the logs. Then ease of editing becomes the issue. Ultimately this goes back to adding two columns for actual site lat long to be used for site user notes and nieghbor distance, which would then preserve rsrp to be used for quality of signal in difficult or in transition cases.

 

Sent from my LG-LS997 using Tapatalk

  • Like 1
Link to comment
Share on other sites

 

Hmm.. that's easy to implement from a technical standpoint, but I'm not sure of the best way to add it to the UI. Did you have something in mind? I can't add a fourth button to the Site Note popup (3 is max), but I could add an option under Preferences to have it populate coordinates instead of the address every time. Would that still be useful, or do you like the address to be displayed on most occasions?

 

EDIT: Would adding an option to have the coordinates added to the geocoded address -- for example, "[40.1234, -70.9876] 123 Main Street, Boston" work for you?

 

-Mike

 

I guess I like the option idea (preferences).  I certainly don't want to mess it up for anyone else because I probably enter my notes differently.  I just know that I am not normally sitting under a tower inputting site notes.  

Link to comment
Share on other sites

Mike, love the updates man! Also, very good idea for the donate button as you deserve it for your hard work. 

 

As I've been using Android Auto more, is there a way you can get the SingalCheck notifications to show up on the Android Auto screen? Not necessarily in the notification bar, but as one of them card like notifications.  I didn't see this listed as a Feature Request on your website and thread searching doesn't come up with a hit, so I thought I'd ask the question. Like how the weather shows up here? I know Google's a bit stingy with which apps get access to the Android Auto display. 

 

bTgP14Km.png

  • Like 1
Link to comment
Share on other sites

Don't forget the coordinates would be in the logs. Then ease of editing beomes the issue. Ultimately this goes back to adding two columns for actual site lat long to be used for site user notes and nieghbor distance, which would then preserve rsrp to be used for quality of signal in difficult or in transition cases.

 

Is that something you'd find useful? I hadn't heard.. ;) It is in the pipeline. Database changes cause a lot of back-end work, and also trigger an extra routine on the UE at first run, so I try to minimize how often I touch the structure. I am working on ironing out an unrelated database bug before I implement that, but it IS coming soon.

 

 

I guess I like the option idea (preferences).  I certainly don't want to mess it up for anyone else because I probably enter my notes differently.  I just know that I am not normally sitting under a tower inputting site notes.

 

Would you prefer coordinates-only, or the coordinates plus the geocoded address like I mentioned? Doesn't matter to me; I know some people run scripts on their logs so I try to accommodate whatever I can.

 

 

As I've been using Android Auto more, is there a way you can get the SingalCheck notifications to show up on the Android Auto screen? Not necessarily in the notification bar, but as one of them card like notifications.  I didn't see this listed as a Feature Request on your website and thread searching doesn't come up with a hit, so I thought I'd ask the question. Like how the weather shows up here? I know Google's a bit stingy with which apps get access to the Android Auto display.

 

Funny you should mention that, I had Android Auto on the to-do list until last night.. I was looking into it, and learned that Android is very strict about what third-party apps they allow for Auto. They only permit two categories: Audio streams and two-way messaging apps. SignalCheck does not fit the guidelines for either one, so it's off the table for now. If Android changes its rules, I'll certainly consider it again.

 

-Mike

  • Like 4
Link to comment
Share on other sites

 

 

 
 

Would you prefer coordinates-only, or the coordinates plus the geocoded address like I mentioned? Doesn't matter to me; I know some people run scripts on their logs so I try to accommodate whatever I can.

 

-Mike

 

I don't have a strong preference either way.  If I had to pick,  I would say coordinates with geocoded address would be nice.

  • Like 1
Link to comment
Share on other sites

Mike, Its showing airave 3 when It's not airave 3, this 1 is the old airave. I sent a diagnostic

 

The information I had is that NID 502 is assigned to the Airave 3, that's why you are seeing that pop up.. I'll just change it to Airave, I don't think there's a significant enough reason to designate the new model any differently, especially if it's not consistently identified.

 

-Mike

  • Like 2
Link to comment
Share on other sites

The information I had is that NID 502 is assigned to the Airave 3, that's why you are seeing that pop up.. I'll just change it to Airave, I don't think there's a significant enough reason to designate the new model any differently, especially if it's not consistently identified.

 

-Mike

do you think you can find a way for it to show the exact frequency its connected to..for example ... 2140.0 mhz

because on my sprint lg g5 it dosent show said information..

Link to comment
Share on other sites

do you think you can find a way for it to show the exact frequency its connected to..for example ... 2140.0 mhz

because on my sprint lg g5 it dosent show said information..

The CDMA channel number in the engineering screen should tell you that. Here's a good resource to help figure out the frequency.

http://niviuk.free.fr/cdma_band.php

Link to comment
Share on other sites

 Funny you should mention that, I had Android Auto on the to-do list until last night.. I was looking into it, and learned that Android is very strict about what third-party apps they allow for Auto. They only permit two categories: Audio streams and two-way messaging apps. SignalCheck does not fit the guidelines for either one, so it's off the table for now. If Android changes its rules, I'll certainly consider it again.

 

-Mike

 

I would love to have something like this

Link to comment
Share on other sites

  • 2 weeks later...

FYI, Android Oreo has caused a few hiccups with SignalCheck. The most noticeable ones:

 

1) CDMA BSL latitude and longitude are flipped. This is a known bug that the Android team claimed was previously fixed. I am looking into rolling out a band-aid fix until they solve the issue. Please 'star' this issue on the Android Issue Tracker to help draw attention to it: https://issuetracker.google.com/issues/63130155

 

2) Mobile Data status never seems to go "inactive" when connected to Wi-Fi. Not sure if this is a bug or intentional changed behavior.

 

3) Logcat is full of errors about audio streams. I am looking into where this is coming from. (EDIT: It's another Android bug. Please 'star' to help: https://issuetracker.google.com/issues/64017989)

 

If anyone notices anything else, please let me know. Still quietly working on updates over here!

 

-Mike

  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...