Jump to content

SignalCheck - Android app to monitor your Wi-Fi/2G/3G/4G LTE/5G-NR signal strengths


mikejeep

Recommended Posts

If Signal Check Pro what would show Carrier Aggregation what would it look like? Sometimes i see 1xRtt and LTE on the screen at the same time.

In a list of neighbor cells, while connected to B41, you'll see duplicate PCIs. This only works for B41, as B25/6 usually share PCIs.
  • Like 2
Link to comment
Share on other sites

Does B41 squared mean second carrier or carrier aggregation?

 

Sent from Moto X Pure via Tapatalk

 

B41^2 indicates the second carrier.

 

If Signal Check Pro what would show Carrier Aggregation what would it look like? Sometimes i see 1xRtt and LTE on the screen at the same time.

 

There is no way to indicate Carrier Aggregation at this time. The only way to see CA is to look at the engineering screen and see if the SCC PCI/RSRP fields are populating. 

  • Like 1
Link to comment
Share on other sites

Amy movement on disabling/hiding Lock Screen notifications on Lollipop & above? Also, is be happy to help test anything M-related on my Nexus 6. I've got preview 3 up and running.

On the Note5, I was surprised to see that you can restrict the apps that can have lock screen notifications. So I disabled it from the lock screen that way. Not gonna help you on the Nexus 6, but is nice for us with the latest Samsungs.

 

Sent from my SM-N920P using Tapatalk

Link to comment
Share on other sites

Without going back and wading through posts, has anyone figured out what the unknown 0dbm neighbor cells are?

No.. those just seem to indicate that the device is seeing a neighbor cell that it can't identify anything about. I wonder if its an Android bug but its hard to tell. I will probably have those filtered out in a future release as they have not proven to be useful as far as I know.

 

-Mike

Link to comment
Share on other sites

I wonder if they are Stingray devices or law enforcement fake towers. Could they belong to the other cell phone carriers?

Unlikely in this case. Those are (usually) used short-term and have limited range. They are also usually used for voice, not data, so there wouldn't be a PCI since that is for LTE. As mikejeep mentioned, it's most likely an Android bug.

 

Best way to be sure is to download the National SCP database notes in Premier forums that will show you the tower and where your neighbor cell is coming from for many markets. If anything shows up that isn't listed for the markets we have, it's either new or Stingray (or similar).

Link to comment
Share on other sites

Best way to be sure is to download the National SCP database notes in Premier forums that will show you the tower and where your neighbor cell is coming from for many markets. If anything shows up that isn't listed for the markets we have, it's either new or Stingray (or similar).

The "Unknown" sites won't correlate to anything in the national database because there is no PCI. If there is a PCI, you don't see the "Unknown" label in the app.

 

Besides a bug, my best guess would be the phone is seeing the neighbor cell before it finishes identifying it. Hard to know exactly, since most of these methods are not documented well.

 

-Mike

  • Like 2
Link to comment
Share on other sites

Unlikely in this case. Those are (usually) used short-term and have limited range. They are also usually used for voice, not data, so there wouldn't be a PCI since that is for LTE. As mikejeep mentioned, it's most likely an Android bug.

Many Stingrays have now received the Hailstorm update. Allowing them to port into the IP standard of traffic. They are then fronthauled to the tower itself through the LTE connection now.

 

No more messy separate connection.

  • Like 1
Link to comment
Share on other sites

The "Unknown" sites won't correlate to anything in the national database because there is no PCI. If there is a PCI, you don't see the "Unknown" label in the app.

 

Besides a bug, my best guess would be the phone is seeing the neighbor cell before it finishes identifying it. Hard to know exactly, since most of these methods are not documented well.

 

-Mike

 

I have seen exactly what you describe.  A PCI may be identified at one point, not identified later, re identified an hour later, all from the same location.   This seems to be more likely where a large number of neighbors can be seen. 

 

Recently, another possibility has come to light: AT&T LTE sites.  SCP does not always see them as such, but rather as Sprint sites.  From a log from this morning:

 

Sprint 310120 00007EA7  361  17165 0  -77 40.49888  -83.9143

 

Similar situation has been observed with US Cellular.  Closer examination has revealed that you are unable to authenticate.  Mostly likely to happen in areas of weak Sprint signal when their site is nearby,

Link to comment
Share on other sites

When I'm on 1xrtt is that 2g? Would it be easier for law enforcement to capture my data if I'm on a 1xrtt connection? I only ask because my area is covered with B26 and B41 yet for some reason I'm always on 1xrtt until I update my profile. Then I hop onto B26/B41. What could cause my Note5 to keep dropping to 1xrtt when I'm covered by B26 and B41?

Link to comment
Share on other sites

running version 4.28,signal check pro largest user of battery right now on my galaxy S6.

 

 I have logging and location enabled, location accuracy set at 100m, have even bumped up to 10km, still just eating thru battery.  Have rebooted phone, i've uninstalled and reinstalled.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...