Jump to content

HTC One M8 User Thread


themuffinman

Recommended Posts

5 hours after update, GPS hasnt broken once! We might be in business here!

I didn't experience any issues at all with GPS during this morning's commute. I was looking forward to this part of the update more than the new camera features.

 

Sent from my Nexus 7 using Tapatalk

  • Like 2
Link to comment
Share on other sites

Odd the update puts band priority as the below:

25>26>41

 

 

Would of expected it to ideally need to be 41>25>26

It's only an initial scan. It means nothing. You'll always end up wherever the network deems necessary.
Link to comment
Share on other sites

GPS still hasnt flopped once.

 

My big gripe now is that they still havent fixed the Bluetooth connections.  My S3 would connect to my truck instantly, all the time, the M8 connects instantly 1 in 10 times, the rest require bluetooth to be toggled, sometimes rebooting the phone, and sometimes it still doesnt work and takes 10-15 minutes after the reboot.

 

Get on that HTC will ya?

Link to comment
Share on other sites

I just got the latest Firmware update yesterday, and I tested out Google Maps with the WiFi Calling feature still on and Google Maps finally worked properly...it seems that the problem was finally resolved

Have your tried to send and receive MMS?
Link to comment
Share on other sites

Sending and receiving of MMS never worked on the original WiFi Calling release and seems like it still isn't fixed.

 

The feature is a non starter if I can't get messages.

 

That's incorrect. I send and receive MMS non stop on WiFi Calling. I'm currently in a group message where I receive hundreds of texts a day though MMS. There have been 0 problems so far. In fact, I think my phone connects to WiFi calling much faster and better after the update.

Link to comment
Share on other sites

That's incorrect. I send and receive MMS non stop on WiFi Calling. I'm currently in a group message where I receive hundreds of texts a day though MMS. There have been 0 problems so far. In fact, I think my phone connects to WiFi calling much faster and better after the update.

Are you using hangouts or the old app?
Link to comment
Share on other sites

Anyone else ever experience this with their M8:

 

I placed a call on my hands free system and instead of "Sprint" appearing on the car's display, it displayed the PLMN "311 490".

 

Now, it gets more bizarre.  Instead of my phone showing it being connected to 1x, it still showed LTE.  I swiped open SCP and it also displayed LTE during this call.

 

Is it even remotely possible this was a VoLTE call?  Or was it just some anomaly with the phone's OS?

 

It has only happened once.

Link to comment
Share on other sites

It'll likely require a software update.

That's what I thought... Not to mention everything that would have to happen on the network side.

 

I'm prepared to call what happened an "undocumented feature."

  • Like 1
Link to comment
Share on other sites

I realize probably no one reads the E8 thread, so I'll post this in here.

 

I bought a 3rd party Doc View case on Amazon and I'm not sure if it works.  When I open and close it, the screen turns on and off, but the "dot view" never comes up.  I tried updating the app, but that didn't do anything.  Anyone else have this problem?

Link to comment
Share on other sites

 

 

Now, it gets more bizarre.  Instead of my phone showing it being connected to 1x, it still showed LTE.  I swiped open SCP and it also displayed LTE during this call.

 

 

 

I've noticed with the new version of SCP that it'll still show the LTE signal in the notification bar but it says "Suspended" when you swipe it down if you are on the phone.

Link to comment
Share on other sites

I realize probably no one reads the E8 thread, so I'll post this in here.

 

I bought a 3rd party Doc View case on Amazon and I'm not sure if it works.  When I open and close it, the screen turns on and off, but the "dot view" never comes up.  I tried updating the app, but that didn't do anything.  Anyone else have this problem?

 

Did you double tap the screen with the dot view case closed? Additionally, does the E8 support DotView cases in general?

  • Like 1
Link to comment
Share on other sites

I've noticed with the new version of SCP that it'll still show the LTE signal in the notification bar but it says "Suspended" when you swipe it down if you are on the phone.

I've noticed that too. In this case it didn't happen. The default LTE and Spark symbols remained as well. The call audio was very choppy. Something low level in the phone probably wasn't functioning properly.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • S23 and S24 (at least ultra versions) have 4xCA NR. I currently have n41+n41+n25+n71 most places I go.  I think select devices have 2xCA upload but I do not think it is in widespread use yet. CA is still mostly download focused.
    • If they use n41 + n41 2CA, people that are somewhat distant from the cell site will have an OK download but the upload will be a disaster.  Upload capability on b-41 was always a disaster on the old Sprint Network.   Now, with n25 + n41 combination, even the more distant users have a more decent upload.  I see n41 + n41 + n25 now with my S22 and I understand that we will see 4xCA with newer phones in the future.     I also see n41 + n41 + n71 sometimes too. Also some other combinations of 25, 41, 71.  I would think that eventually we will see AWS paired with n41 too.  What I am not sure of is ----  when I see 3xCA on my S22, I can see the 3 channels involved in the download but I am never sure just what I have on the upload. I do not think I have 3xCA on the upload.
    • I don't know enough about the nuts and bolts of NR to know the answer, but is there a reason they're not doing two overlapping 100 MHz n41 carriers and using selective resource shutoff to make each one 97 MHz?  Thus making use of the full 194 MHz instead of leaving 4 MHz unused as implied by the current standard 100+90 configuration? - Trip
    • Looks like another T-Mobile 5G bump happened over the past week and a half, maybe less: n41 carriers are now 90+100 MHz, up from 80+100 (which in turn is up from 40+100 back in early March). This is on top of the new n25 carrier recently. As part of this, it looks like T-Mobile is starting to prefer n25+n41 2CA even when pushing data, rather than having higher levels of CA that would hit higher peak speeds; at least indoors I need to force n41-only if I want to see the full 190 MHz there. To be fair the speeds are plenty quick with that amount of spectrum, and I'm sure they're load balancing, and my guess is this is a little better for battery life? With this expansion, they're now at 10x10+10x10 n25, 15x15 n71, 100+90 n41, for a total of 260 MHz (including FD uplink) of deployed NR here, up from 250 MHz a week ago, 230 MHz two weeks ago, and 190 MHz six months ago. VZW is at 140 MHz minus mmW, 170 if you count n2 DSS. AT&T is at 150 MHz (80+40 n77, 15x15 n5), 210 MHz I think if you count n2 and n66 DSS (guessing they're still running those). With this level of spectrum they should be able to continue offering home internet wherever. Guessing this is the last upgrade they can make before they need to throw new equipment on sites for C-Band. At this rate I figure that'll happen next year on a few dozen high-traffic sites.
    • https://www.lightreading.com/wireless/tds-telecom-to-launch-mobile-service-via-nctc-s-mvno Surprising given merger.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...