Jump to content

AT&T Launching VoLTE


Paynefanbro

Recommended Posts

AT&T took the plunge. Let's see how far they can go with it and how it compares to the HD Voice offerings of Sprint and T-Mobile.

 

[url="http://www.androidcentral.com/att-switches-hd-voice-small-test-markets-small-phone

We have known about this for a while now...... Also, AT&T is OK in my opinion but I had dropped calls, and call that would not connect all the time with them back when 3G was the big thing.  I tried them recently with the 4G LTE and its "BETTER" but they still have a LOT of work to do, just like Sprint (Just saying!).

Link to comment
Share on other sites

We have known about this for a while now...... Also, AT&T is OK in my opinion but I had dropped calls, and call that would not connect all the time with them back when 3G was the big thing.  I tried them recently with the 4G LTE and its "BETTER" but they still have a LOT of work to do, just like Sprint (Just saying!).

We knew they were going to do it, but this is just confirmation from AT&T that they have started and where they are starting it.

Link to comment
Share on other sites

AT&T needs to do some refarming for LTE. So VoLTE makes sense for them. Let them work out the bugs.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

  • Like 1
Link to comment
Share on other sites

I just wanna state, that hold music sounds like crap ALL THE TIME. This article is clearly biased and uninformed.

 

/Sarcasm.

 

But it will be nice to test out the VoLTE. I know that TMO has some lag when connecting calls, and I've experienced the same on AT&T. So it would be nice to see if they can fix that.

Link to comment
Share on other sites

Looks like Verizon will be joining them. http://www.verizonwireless.com/news/article/2014/05/verizon-wireless-volte-national-rollout-plans.html

 

Sent from my Nexus 5 using Tapatalk

Interesting tidbit from that page:

 

"For a customer to make or receive a VoLTE call, both parties must have VoLTE-enabled devices and be in an area where VoLTE is available."

Link to comment
Share on other sites

Interesting tidbit from that page:

 

"For a customer to make or receive a VoLTE call, both parties must have VoLTE-enabled devices and be in an area where VoLTE is available."

What happens when calling land lines?

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Interesting tidbit from that page:

 

"For a customer to make or receive a VoLTE call, both parties must have VoLTE-enabled devices and be in an area where VoLTE is available."

 

It kind of sounds like Verizon is making a type of their own Skype/Google hangouts. Doesn't really seem like what I thought VoLTE would be.

Link to comment
Share on other sites

In this case, VZW may be using "VoLTE" to refer not to the transport mechanism but instead to the higher fidelity codec.  In other words, a call to a non VoLTE handset or landline would be transcoded and lose any fidelity gain.  It would still be VoLTE on one end, but to the technologically challenged average user, it would not sound like a "VoLTE" call.

 

AJ

  • Like 1
Link to comment
Share on other sites

In this case, VZW may be using "VoLTE" to refer not to the transport mechanism but instead to the higher fidelity codec.  In other words, a call to a non VoLTE handset or landline would be transcoded and lose any fidelity gain.  It would still be VoLTE on one end, but to the technologically challenged average user, it would not sound like a "VoLTE" call.

 

AJ

 

That was my thought process as well. They must think the consumer would find the distinction too confusing.

Link to comment
Share on other sites

That was my thought process as well. They must think the consumer would find the distinction too confusing.

 

It would or still will be confusing for many consumers.  Billy Ray will get a new VoLTE enabled VZW handset and wonder why in the dickens he can video call with Jim Bob but not with Buddy Lee -- not understanding that Jim Bob does but Buddy Lee does not have a VoLTE enabled handset.  A lot of users are going to think that this is just a network upgrade and that any handset with a front facing camera will cut it.

 

Another point to keep in mind is that VoLTE on VZW benefits users only with potentially higher quality calls -- with or without video.  They already have simultaneous voice and data, since VZW has steadfastly stuck with a dual RF path SVLTE paradigm.  So, most of the VoLTE advantages flow to VZW itself, since VZW may then start to offer single RF path, 3GPP only handsets.  I actually hope that VZW gets a little too far over its skis on this one and really pushes single RF path, 3GPP only handsets.  Rural VoLTE coverage is going to stink like shit, and it would be fun to see VZW take a hit to its supposedly bulletproof network reputation.

 

AJ

  • Like 2
Link to comment
Share on other sites

The article says VoLTE will support handoffs to HSPA+ and Edge. Is there also a way for handoffs to 1x?

 

eCSFB(r9) / CSFB(r8).

 

Tmobile and ATT uses CSFB rel 8.

  • Like 1
Link to comment
Share on other sites

Isn't that just for data handoff?

 

Circuit Switched FallBack (CSFB) is a technology whereby voice and SMS services are delivered to LTE devices through the use of GSM or another circuit-switched network.

 

Circuit Switched FallBack is needed because LTE is a packet-based all-IP network that cannot support circuit-switched calls. When an LTE device is used to make or receive a voice call or SMS, the device "falls back" to the 3G or 2G network to complete the call or to deliver the SMS text message.

 

CSFB was specified in 3rd Generation Partnership Project (3GPP) Release 8. CSFB requires a software upgrade of the operators core and radio network. CSFB is often seen as an interim solution for LTE operators. Voice over LTE (VoLTE) is considered to be the long-term goal for the delivery of voice services on LTE networks.

Link to comment
Share on other sites

The article says VoLTE will support handoffs to HSPA+ and Edge. Is there also a way for handoffs to 1x?

 

That is called SRVCC, which stands for Single Radio Voice Call Continuity.  It is a 3GPP thing.  And while it probably could be harmonized with CDMA1X, I doubt that it will.

 

AJ

  • Like 1
Link to comment
Share on other sites

That is called SRVCC, which stands for Single Radio Voice Call Continuity.  It is a 3GPP thing.  And while it probably could be harmonized with CDMA1X, I doubt that it will.

 

AJ

 

 

Actually eSRVCC and SRVCC is compatible CDMA 1x on the equipment deployed by all 4 vendors. 

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...