Jump to content

Google Nexus 5 by LG Users Thread!


nexgencpu

Recommended Posts

So, I just rejoined Sprint from Ting. I have a Nexus 5 and my wife has an iphone 5. Does anyone know if Sprint has a way to monitor usage? (I have 24 GB of data on the Family Share Plan but I will probably be out of WiFi range for the next 10-15 days, long story)

 

 

I know there is the horrible Sprint Zone app but I think that only comes preloaded by Sprint and I bought my N5 from Google. Maybe I am just paranoid after having to carefully watch my usage every month on Ting.

Link to comment
Share on other sites

I doubt it's a signalcheck bug because phone calls won't work. Oddly enough the phone will still try to connect the call. I don't get the "mobile network unavailable" message like when I am outside of voice coverage.

 

6ba430f2c3d9fbd240371ff5ff060a87.jpg

I have the same problem. It came about after I switched in my T-Mobile prepaid SIM and then went back to Sprint. The workaround is to set the phone to 1x only and reboot. After rebooting you can set it back to LTE.
  • Like 1
Link to comment
Share on other sites

I have the same problem. It came about after I switched in my T-Mobile prepaid SIM and then went back to Sprint. The workaround is to set the phone to 1x only and reboot. After rebooting you can set it back to LTE.

So it's a SIM swapping issue then. I too have used a T-Mobile SIM in this phone. But I haven't swapped in a while. Looks like a full restore might be in order?
Link to comment
Share on other sites

So it's a SIM swapping issue then. I too have used a T-Mobile SIM in this phone. But I haven't swapped in a while. Looks like a full restore might be in order?

Doesn't work. I tried flashing the full factory image and the issue persists. I was only able to resolve it once after swapping back to sprint from T-Mobile, but since then every swap has caused the same issue.
Link to comment
Share on other sites

So, I just rejoined Sprint from Ting. I have a Nexus 5 and my wife has an iphone 5. Does anyone know if Sprint has a way to monitor usage? (I have 24 GB of data on the Family Share Plan but I will probably be out of WiFi range for the next 10-15 days, long story)

 

 

I know there is the horrible Sprint Zone app but I think that only comes preloaded by Sprint and I bought my N5 from Google. Maybe I am just paranoid after having to carefully watch my usage every month on Ting.

You should be able to see it on the MySprint webpage on Sprint.com. It should look like this:

sprint page.png

 

Edit: If you're looking for an app specifically, unfortunately, I don't know of one.

Link to comment
Share on other sites

Doesn't work. I tried flashing the full factory image and the issue persists. I was only able to resolve it once after swapping back to sprint from T-Mobile, but since then every swap has caused the same issue.

Hmm so it only happens to you after each swap? The last time I swapped was Friday August 29. The first issue was on Sunday Aug 31 and again today. Usually after swapping SIMs you have a notification stating the requested network is unavailable. I didnt get that notification in this case. The disabling of the 1x was random. Next time it happens, I will look at the radio info (*#*#4636#*#*) to see if something changed.

Link to comment
Share on other sites

So, I just rejoined Sprint from Ting. I have a Nexus 5 and my wife has an iphone 5. Does anyone know if Sprint has a way to monitor usage? (I have 24 GB of data on the Family Share Plan but I will probably be out of WiFi range for the next 10-15 days, long story)

 

 

I know there is the horrible Sprint Zone app but I think that only comes preloaded by Sprint and I bought my N5 from Google. Maybe I am just paranoid after having to carefully watch my usage every month on Ting.

You can use the built in tool in android to keep track of data and set a limit. I don't know if you can do the same on iOS. If you want sprint zone on a nexus 5, you'll have to side load it. None of them have it.

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

So, I just rejoined Sprint from Ting. I have a Nexus 5 and my wife has an iphone 5. Does anyone know if Sprint has a way to monitor usage? (I have 24 GB of data on the Family Share Plan but I will probably be out of WiFi range for the next 10-15 days, long story)

Internet Speed Meter Lite. Shows your data usage broken down into mobile and Wi-Fi, and you can choose which day of the month it resets. Also shows current transfer rates in your status bar. It is free; you can upgrade to "Pro" with more features for a small cost.

 

Link: https://play.google.com/store/apps/details?id=com.internet.speed.meter.lite

 

Not sure of a comparable iOS app, but something similar must be on the App Store.

 

-Mike

Link to comment
Share on other sites

Yeah, that would be 40 GB though, not the 20+2 per line=24GB I should have.

According to Google it's 41.943 GB...odd. When I did the calculation it came to exactly 40GB.

 

 

Edit: I misunderstood what you meant. I see the issue now. you have more data then what you're supposed to have.

Link to comment
Share on other sites

Google should know better. 1000 kilobytes is not 1 Megabyte.

Oh but it is.

 

The politically correct way to say 1024 bytes, 1024^2 bytes, and 1024^3 bytes, is kibibyte, mebibyte, and gibibyte. Only the crazy storage industry (Hard drives and SSDs) and Windows actually standardizes 1024 as a kilobyte instead of a kibibyte. Mac OS and Linux use the correct prefix.

Link to comment
Share on other sites

The politically correct way to say 1024 bytes, 1024^2 bytes, and 1024^3 bytes, is kibibyte, mebibyte, and gibibyte.

 

Negatory.  The whole kibi-, mebi-, and gibi- nonsense is just a bunch of poopi- made up for people who cannot do basic binary math.  The 2^x system is how it was, is, and should be.

 

AJ

Link to comment
Share on other sites

Negatory.  The whole kibi-, mebi-, and gibi- nonsense is just a bunch of poopi- made up for people who cannot do basic binary math.  The 2^x system is how it was, is, and should be.

 

AJ

I wholeheartedly disagree. Giga, due to its usage, can mean either 10^9 and 2^30 depending on the context. Hence, we have, confusing calculations like Google saying 1 TB is 1000 GB, vs. Windows saying 1 TB is 931 GB. Same exact word, completely different meaning. Both are right because they're both standardized, but I believe there should be a unique designation for the 2^x family of prefixes because it is simply just different than the 10^x prefixes. With the numbers we're dealing with, it's only a 7% difference, It's not that big of a deal, but when we get into the larger numbers the percent error is going to be bigger. I just disagree that we can have one prefix mean two different things. In that case, we might as well start using 1024 meters to a kilometer when I feel like it, or 1024 for a kilogram whenever we feel like it.

Link to comment
Share on other sites

In that case, we might as well start using 1024 meters to a kilometer when I feel like it, or 1024 for a kilogram whenever we feel like it.

 

As units of measurement, meters and grams operate in the base 10 system.  Bits and bytes do not.  There should be no confusion between the two for the properly informed.

 

AJ

Link to comment
Share on other sites

As units of measurement, meters and grams operate in the base 10 system.  Bits and bytes do not.  There should be no confusion between the two for the properly informed.

 

AJ

The problem is that bits and bytes CAN use 1 TB to 1024 GB OR 1 TB to 1000 GB. If everyone used the same thing, then sure, 1024 gigabytes is 1 TB. I'd have no problem with that except that 1 TB is ALSO 1000 GB. Now which one do I use? Who's using what? The problem is they are BOTH CORRECT depending on which standard they want to follow.

Link to comment
Share on other sites

The problem is that bits and bytes CAN use 1 TB to 1024 GB OR 1 TB to 1000 GB. If everyone used the same thing, then sure, 1024 gigabytes is 1 TB. I'd have no problem with that except that 1 TB is ALSO 1000 GB. Now which one do I use? Who's using what? The problem is they are BOTH CORRECT depending on which standard they want to follow.

 

That bean counters and marketers in industry created this issue does not mean science needed to create a separate binary system.  People just need to deal with the ambiguity by reading the fine print.  Besides, no one uses the kibi- type prefixes because they just flat out sound like gibberish.

 

AJ

Link to comment
Share on other sites

A quick Wikipedia (yes it's not the absolute source for everything) search puts the kebibyte designation as a replacement for kilobyte. Kilo as a standard unit does mean 1000. Kebi is supposed to mean 1024 and was created by the international electrotechnical commission. 1000kilobytes for a megabyte is correct if counting via decimals. 1024kilobytes is correct for counts in binary. But in an attempt to differentiate the two, the kebi, mebi, gibi prefixes were created.

 

But for the sake of this thread we will stick with the traditional more well known 1024 kilobytes even though it is in a sense incorrect. As AJ stated, the kebi is essentially moot since its not a widely used designation. I highly doubt Sprint or any other carrier will care to know the difference between kilo and kebi.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...