Jump to content

Wifi calling


Djjim

Recommended Posts

I assume the answer to this question would be yes. If sprint is focusing on wifi calling and is going to use it as a selling point, then naturally I would think they'll be adding more phones that support it

 

 

Sent from my iPhone 5s using Tapatalk

Link to comment
Share on other sites

It's been two months since it was announced and crickets......and one of the two devices is eol'd. Come on Sprint. Let's go!!

It's only EOL for postpaid; it's still available for Sprint Prepaid.

 

On-topic, Sprint has said that more devices will be supported in the future. No other information has appeared.

 

WiFi calling is really available on Republic Wireless, a Sprint MVNO, on the Moto X now, and the Moto G very soon here.

Link to comment
Share on other sites

I wish they'd add it to the the S4. The Note and Mega are too big! And the S4 Mini is too small. My wife has the S3 with Verizon and I want to switch her to Sprint. I'd like something for her that is around the S3/S4 size. She needs wifi calling because she works in a hospital.

Link to comment
Share on other sites

Just got my uupdate so far it works OK... Does this mean I can scrap my airwaves now lol

You are the perfect person to totally test this out.Then come back here and tell us all how good or bad this works.

How is call quality over the Wi-Fi.  Can you really dump the Airave?

Test it out good and be critical.  Is it really an acceptable service that can work for most people??

I personally do not need it but we all want to know how it works.

Link to comment
Share on other sites

Just got my uupdate so far it works OK... Does this mean I can scrap my airwaves now lol

 

That would be the real reason to setup wifi calling, it both expands coverage and reduced the need for Sprint to use airraves.

  • Like 1
Link to comment
Share on other sites

You are the perfect person to totally test this out.Then come back here and tell us all how good or bad this works.How is call quality over the Wi-Fi. Can you really dump the Airave?Test it out good and be critical. Is it really an acceptable service that can work for most people??I personally do not need it but we all want to know how it works.
I haven't done any exhaustive testing, but I have it on my Note 3 and have used it several times. I'd say that the voice quality is just as good as making a (non HD) call on the network. Once you get through the initial set up which I found slightly cumbersome, the feature works great imo. I think, not surprisingly, the quality of your experience is going to depend on the quality of your wifi signal. For instance, if you have a large home and you're somewhere in it that puts you at the edge of your router's range your call quality will likely reflect that. I haven't tried to make it hand off from my wifi to the network though that probably won't work. Still, Sprint would do well to incorporate this feature into as many handsets as they can add quickly as they can.

 

Not sure if this has been answered before, does the 5s support wifi calling? And if not, can an update make it?Sent from my iPhone 5s using Tapatalk
Currently only the Galaxy Note 3, Galaxy Mega and Galaxy S4 mini support wifi calling. More handsets will be added. Which ones and when are anybody's guess at this time. I don't think any of T-Mobile's iPhones support the feature yet so I probably wouldn't get my hopes up on that front. Sent from my SM-N900P using Tapatalk
Link to comment
Share on other sites

You are the perfect person to totally test this out.Then come back here and tell us all how good or bad this works.

How is call quality over the Wi-Fi.  Can you really dump the Airave?

Test it out good and be critical.  Is it really an acceptable service that can work for most people??

I personally do not need it but we all want to know how it works.

i posted that before i really tested it... i thought it was working, but later on i noticed that i had a notification saying that i had an error in activation, i clicked on it, it said it was activated and working on my phone(like it did the first time) but when i tried to use it the notification came up again... i tried a couple things i saw on android central but nothing worked yet... figured id try it again when i got home after work... 

 

but as soon as i get it to work right ill let you know

Link to comment
Share on other sites

Yep, like I experienced, getting it set up initially can be a little frustrating dealing with the activation issues. Easy to tell when you do have it set up though. The wifi calling icon in the status bar and the green wifi call button:

 

 

 

avedaja6.jpg

 

 

 

 

And once you're on the call it tells you that it's a wifi call and the red end button also gets the updated wifi treatment:

 

 

 

 

 

4ytahadu.jpg

 

 

 

 

 

Sent from my SM-N900P using Tapatalk

  • Like 3
Link to comment
Share on other sites

I read that in order to use wifi calling, you need to have a CDMA signal. Does anyone know if a roaming signal satisfies that requirement? I seriously wish Sprint didn't require it. It would've been just as easy to limit the use to only US IP addresses.

 

I'm going on vacation soon to Robbinsville, NC and Sprint has roaming there (I believe through Verizon) but the cabin I'm staying in has wifi. This is the reason I'm asking.

 

Sent from my SPH-L720T using Tapatalk

 

Link to comment
Share on other sites

I read that in order to use wifi calling, you need to have a CDMA signal. Does anyone know if a roaming signal satisfies that requirement? I seriously wish Sprint didn't require it. It would've been just as easy to limit the use to only US IP addresses. I'm going on vacation soon to Robbinsville, NC and Sprint has roaming there (I believe through Verizon) but the cabin I'm staying in has wifi. This is the reason I'm asking. Sent from my SPH-L720T using Tapatalk.

You can make a video call via hangouts if that helps.

Link to comment
Share on other sites

I read that in order to use wifi calling, you need to have a CDMA signal. Does anyone know if a roaming signal satisfies that requirement? I seriously wish Sprint didn't require it.

A CDMA signal isn't required.

 

Sent from my SM-N900P using Tapatalk

 

 

Link to comment
Share on other sites

Will you let us know if wifi calling works? When are you going on vacation? I have a feeling it will work within any CDMA area regardless of carrier.

I'll definitely post back after my vacation to let everyone know how well it works. I'm hoping for the best.

 

Sent from my SPH-L720T using Tapatalk

 

 

Link to comment
Share on other sites

Saw your posts. Had to offer my experience. I posted a few days ago in the Sprint Users forum.

 

I have a Galaxy S4 (720T), received the WiFi calling update early in the morning a yesterday.

 

I tested extensively the last two days. It works awesome!

 

Calls I made were clear. Other party says they hear me fine.

 

You setup your S4 to any WiFi you connect to individually. So the S4 won't automatically use WiFi calling when you are connected to a WiFi..the first time..you have to deliberately enable WiFi calling on the WiFi of you wish to use for WiFi calling.

 

Once that is done..the next time you attach to that WiFi..within 15secs..the S4 says WiFi Calling is now enabled on "What Ever WiFi.." Your voice signal drops off and now you are fully ready to use your S4 via WiFi.

 

Also..the update description said that once you connect to a WiFi with WiFi calling..the text messages go through the WiFi as well.

 

I see the activity over WiFi calling when I type "usage." It tells me how many minutes I used for WiFi calling and how many texts i sent via WiFi calling.

 

Another benefit..I no longer need my Airave.. I will keep it for my kids..but the Airave doesn't come into play.

 

Once I roll into my garage and my S4 connects to my home WiFi I am good. The Airave is not used at that point. Its awesome..I used to have to enable CDMA mode only when I got home so my Airave will be stable..now I just leave LTE mode on all the time.

 

Its really a freaking awesome update!! All the dead spots at my job are no longer a factor..WiFi is all over the two building where I work. I setup my S4 to use WiFi calling on all the WiFi.. Now I have no dead spots at my job..

 

Again..a really cool Sprint update.

 

Sent from my SPH-L720T using Tapatalk

 

 

  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • T-Mobile has saved its 28Mhz mmWave licenses by using the point to point method to do environment monitoring inside its cabinets. The attachment below shows the antennas used: https://wireless2.fcc.gov/UlsApp/ApplicationSearch/applAdmin.jsp;JSESSIONID_APPSEARCH=LxvbnJuvusmIklPhKy6gVK7f9uwylrZ8LiNf3BqIKlDp3_5GxoBr!300973589!225089709?applID=14787154#   Here are the sites for Franklin county OH: https://wireless2.fcc.gov/UlsEntry/attachments/attachmentViewRD.jsp?applType=search&fileKey=66518254&attachmentKey=21989782&attachmentInd=applAttach
    • Yep, there is a label on the side of the box but it doesn't provide any useful info that the city doesn't already provide (Crown Castle Solutions is the franchisee). You can see my graphical interpretation of the city's dataset here.
    • T-Mobile UScellular agreement links from SEC filings: https://www.sec.gov/ix?doc=/Archives/edgar/data/821130/000110465924065665/tm2415626d2_8k.htm Look inside for main link. Credit mdav-dos1 on reddit
    • Totally agree.  In my county and surrounding counties, TM did not place n-41 on every site.  When I look at the sites in question, I probably would have not placed it there either.  I can find just a few with n-71 only and in most of those cases if you live there and know the probable usage of the residents, you would not do a full upgrade on those sites.  One site in particular is set up to force feed n-71 through a long tunnel on the Turnpike.  No stopping allowed in the tunnel. No stores, movie theaters, bathrooms, so n41 would be a waste.    n25 is not really needed either, so it is not there.  The tunnel is going through & under a mountain with more black bears than people.  TM was smart.  Get good coverage in the tunnel but do not waste many many thousands of dollars with extra unused spectrum. I also see sites with only n71 & n25.  Again this makes sense to me.  Depending on what county we are talking about, they moved much of their b25 from LTE to nr.  Some counties have more n25 than a neighboring county, but luckily, it is plenty everywhere.   When you are in a very rural area, n41 can run up the bills and then be barely used.  I am NOT finding sites that should have had n41 but TM failed to provide it.  They may have to come back later in a few years and upgrade the site to n41.  However, we just may eventually see the last little piece on Band 25 leave LTE and move to n25. I am not sure if the satellite to phone service is using band 25 G block as LTE or nr. We also can possibly have at least some AWS move from LTE to nr at some point.  Yes, everybody wants n41. it is not justified in some cases.  When I travel, I desire some decent service along the entire route but it does not have to be 1 or 2 gig download.   If I can get 50/5 on a speedtest with data that will flow and not stutter, I am very happy. Yes, they will swap out the USC gear.  TM needs to match their existing network. The USCC equipment did the job for years, but it is time to retire it.
    • Lots of time if you can get close to the pole, you will see a sticky label on the box that is low enough to read. Most of the time it warns of RF exposure but also it may have a toll free number to call if there is an issue. Sometimes there is a power company meter with the name of the user. I would be surprised if there was nothing there to help identify it.  Thinking further, if this is multi-Tenant oDAS, then maybe you might only see some name like Crown Castle or maybe even a department in the city government.   An app on your phone may show the carrier(s)
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...