Jump to content

Recommended Posts

How often is the current production rate updated? Just wondering, since I'm pretty sure it bumped up about 10% since last time I looked at it less than a month ago. Does it update automatically ?

Link to comment
Share on other sites

How often is the current production rate updated? Just wondering, since I'm pretty sure it bumped up about 10% since last time I looked at it less than a month ago. Does it update automatically ?

 

It only gets updated when the numbers are run, a couple times a month. It used to be once a week, but now that there are so many markets and so much data it takes a lot more time to do, so it's not as often.

  • Like 1
Link to comment
Share on other sites

So I noticed something. If I go long periods of time without using my iPhone in my room, I almost always find it on LTE with one bar (one circle on iOS 7  :P), but as soon as I try to use data, it immediately switches to 1x, then 3G. I don't know why, but what a tease lol

  • Like 1
Link to comment
Share on other sites

So I noticed something. If I go long periods of time without using my iPhone in my room, I almost always find it on LTE with one bar (one circle on iOS 7  :P), but as soon as I try to use data, it immediately switches to 1x, then 3G. I don't know why, but what a tease lol

Happens to me every single day, multiple times a day in my apartment as well. I think you might be on the edge of the signal limit then..

  • Like 1
Link to comment
Share on other sites

Happens to me every single day, multiple times a day in my apartment as well. I think you might be on the edge of the signal limit then..

This happens to me all the time in one room of the house. Usually signal is -118 to -124

 

Sent from my SPH-L710 using Tapatalk 4 Beta

 

 

Link to comment
Share on other sites

Essentially one or zero bars. Definitely not usable.

 

Sent from my SPH-L710 using Tapatalk 4 Beta

Yup. Happens to me, and then mine switches back to 3g. So sad though. Can walk to the other side of my hallway in my apartment complex and 3 bars and LTE. Makes me want to cry. haha :twitch:

  • Like 1
Link to comment
Share on other sites

Translate that into, I don't have an android, english for me :D haha

 

You still have an engineering screen where you can look at signal levels. I don't remember the shortcut to get there though. A quick search should find it.

  • Like 1
Link to comment
Share on other sites

You still have an engineering screen where you can look at signal levels. I don't remember the shortcut to get there though. A quick search should find it.

Figured it out. Right now im at -90....From what I read, the higher the number the better right???

Link to comment
Share on other sites

Closer to Zero yes.

Well then it just bumped up to -118 and then back to the -90s....Looks like I have something interesting to do when walking my dog tonight. Gonna see how low it gets when I'm in the LTE zone. Ha. LTE zone....I'll see myself out Edited by jamisonshaw125
  • Like 1
Link to comment
Share on other sites

It actually got worse when I went into LTE .... Dropped down to -110 to -120

LTE values will typically be lower, for a couple of reasons. One being it is displayed in RSRP rather than RSSI so the numbers are different. Second that the LTE sure you were connecting to was probably father away than the site giving you EVDO.

 

Sent from my HTC ONE

 

 

  • Like 1
Link to comment
Share on other sites

So I noticed something. If I go long periods of time without using my iPhone in my room, I almost always find it on LTE with one bar (one circle on iOS 7  :P), but as soon as I try to use data, it immediately switches to 1x, then 3G. I don't know why, but what a tease lol

 

One reason can be that when not in use you have the phone sitting on a piece of furniture. Once you put it on your hand the your body alters the antenna properties; though very slight. Remember that your body does have electrical properties. This is normal performance.

 

@l3x

  • Like 2
Link to comment
Share on other sites

One reason can be that when not in use you have the phone sitting on a piece of furniture. Once you put it on your hand the your body alters the antenna properties; though very slight. Remember that your body does have electrical properties. This is normal performance.

 

@l3x

You're holding it wrong. :-P

 

Sent from my SPH-L710 using Tapatalk 4 Beta

 

 

Link to comment
Share on other sites

As a certified project manager, I don't buy this logic. You can have excuses or you can have results. Not both.

A project manager's job is to coordinate and plan so that these fall into place together. Yeah, every now and again, s**t happens. But if every job is delayed by municipalities, backhaul, then someone needs to anticipate this and get an earlier start.

As a CDT/CCCA myself, I disagree. This is a nationwide project. It's not one local project. It is 99 very large regional projects. It was rushed to start so some results could be seen early for customers.

 

They could have done more planning and spent a lot of time up front to make sure that Network Vision went as smooth and seamless as possible. However, that would have delayed the start of Network Vision another 6-9 months and the completion date would still be roughly the same.

 

So which is better, run out the door and do anything and everything possible every day so that customers can start seeing some results immediately, or wait and do more planning and delay the first sites that could be worked on now until they all can be done together farther down the road? Sprint chose the former, you suggest the latter. And you get the luxury of choosing after the fact, and after a period of results that you can measure.

 

Perhaps if Sprint could have seen into the future, they would have made a different choice. But I doubt it. Because of the head start their competitors had, there was an urgency to start as soon as possible. They had the potential of losing millions of customers.

 

Sprint is not the carrier for everyone. And now with Network Vision there is a clear measuring stick in which to see the deployment of LTE. If it doesn't meet your needs and you cannot wait for the evolution of the network in your area, you should find another carrier.

 

Robert from Note 2 using Tapatalk 4 Beta

 

 

  • Like 6
Link to comment
Share on other sites

Perhaps if Sprint could have seen into the future, they would have made a different choice. But I doubt it. Because of the head start their competitors had, there was an urgency to start as soon as possible. They had the potential of losing millions of customers.

 

Sprint is not the carrier for everyone. And now with Network Vision there is a clear measuring stick in which to see the deployment of LTE. If it doesn't meet your needs and you cannot wait for the evolution of the network in your area, you should find another carrier.

 

Robert from Note 2 using Tapatalk 4 Beta

This.This.This. Sprint is not in the business of losing money....Oh wait, thats not just sprint. Thats every single corporation that exists. It's clear that they are doing everything in their power to speed things up, even with all the set backs/ hold ups, that have been slowing the complete network overhaul....

 

HAve to run that through peoples minds a few times. Complete network overhaul, not just 4g lte rollout. May be taking a while, but I think it'll be worth it in the long run for sure. Still highly anticipating Orlando launch. Would be an excellent christmas present. 

  • Like 2
Link to comment
Share on other sites

Has anybody seen anything in the PSL area? I figured since they launched that area they wouldn't leave the 6 remaining towers without upgrades. I know there is still lots to do everywhere but maybe they launched a little premature...

Link to comment
Share on other sites

had to drive over to Bithlo this morning, talk about an LTE hotzone! I was running tests and getting between 10-20mbps down all the way until I got back up on Alafaya - then it went back to solid 3G.

  • Like 1
Link to comment
Share on other sites

had to drive over to Bithlo this morning, talk about an LTE hotzone! I was running tests and getting between 10-20mbps down all the way until I got back up on Alafaya - then it went back to solid 3G.

"Welcome to Bithlo - We Have Sprint LTE!!"

 

Sent from my SPH-L710 using Tapatalk 4 Beta

 

 

  • Like 2
Link to comment
Share on other sites

"Welcome to Bithlo - We Have Sprint LTE!!"

 

Sent from my SPH-L710 using Tapatalk 4 Beta

that they do, I was doing the three SSS's, Signalcheck Pro, Speedtest, and Sensorly. Everytime the signal would decline, it would drop to 3G then reacquire another tower and BOOM - LTE again.

 

2013-07-18_09-47-34.png

Edited by UCFKnight
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • After several months of testing, an update to SignalCheck Pro is rolling out on Google Play. It may take up to 48 hours to become available for download. Notable changes include: Added option to display site notes for NSA 5G-NR cells. Enabling this new option (Preferences > Display Settings > Show NSA 5G-NR Site Notes) will cause the app to make an "educated guess" as to what the most appropriate site note is linked to the connected NSA 5G cell, using the PCI and the device location. If it finds an existing entry that is likely to be relevant, it will display the note along with the distance from where the strongest signal from that cell was logged. While connected to NSA 5G, these notes cannot be edited; a valid NCI is required to add/edit notes and that information is not available on NSA connections.   Added option to log cells with missing/invalid PLMN (such as NSA 5G-NR cells). Users asked for the ability to log data for NSA 5G, so a new option (Preferences > Logger Settings > Log Cells with Missing PLMN) will permit this.   Added option to display LTE info above 5G-NR info. Enabling this new option (Preferences > Display Settings > Show LTE Cells Above 5G-NR Cells) shows the same information that is currently displayed, but moves the LTE information above the 5G-NR information. Other changes: Code optimizations and enhancements. Improved Android 15 compatibility. Overhauled Purchases module. Resolved force closes impacting some GSM/LTE connections. Resolved issue with improper 5G-NR PLMN display when NR/LTE PLMNs did not match. Resolved issue with improper PLMN display with single-digit MNCs. Resolved issue with incorrect 5G-NR bands displayed on some devices due to Android bug. Resolved issue with incorrect number of neighbor cells displayed when some cells were unknown. Resolved issue with missing 5G-NR data when sector display is enabled. Resolved issue with saving 5G-NR site notes when NR/LTE PLMNs did not match. Resolved issue with settings to log missing GCI/NCI/TAC/PLMN being ignored. Resolved issues with web data export function. Updated internal libraries. Updated provider database. Updated target API to Android 15. I appreciate all of your support, and a big thank you to the members of the Beta Crew that help with testing and feedback!
    • Oct security update is out.
    • Stopped by again today and the antennas are up but it isn't live just yet. If other Sprint conversions are anything to go by it'll likely take about a month for the site to go live.
    • It is an Android bug that was reportedly fixed in August 2023 but definitely has not been. I have implemented numerous workarounds in SCP to correct the NR bands the app displays. The OS ignores the possibility that many NR-ARFCNs are valid across multiple bands.. it reports the lowest NR band that is valid for the current ARFCN. In your example, channel 432530 can be n1, n65, or n66.. so the OS just (lazily) reports n1.   Awesome, thanks! I will add an n65 override also.
    • Yeah both of those instances were on my AT&T s22 ultra. Seems ro be working as intended today in latest release.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...