Jump to content

Network Vision/LTE - Atlanta/Athens Market


frank04

Recommended Posts

My N5 after the update here in Atlanta is performing admirably well.  It very effectively switches between bands 25 and 26 as necessary and very rarely falls back to 3G.  I am happier with this phone now that I have ever been since purchasing it.

 

I have no experience with band 41 yet so I can't really comment on that though I know that there are many active band 41 (old Clear) sites within the city.  Once I have some experience with b41 on my N5 I will post comments on its performance here in Atlanta.

 

But my speeds are far more than adequate and my coverage has increased quite a bit due to the increasing prevalence of b26.

Glad everything is finally working out for you.

  • Like 2
Link to comment
Share on other sites

Maybe it was CSFB problems all along. Huh. Well, glad it's working!

All indications are that that, indeed, was the case.

 

On another note, is NSN out deploying b41 on Sprint sites yet? If Sprint is to get the first 100 million online with b41 before the year is out then I would imagine they need to get a massive move on.

Link to comment
Share on other sites

All indications are that that, indeed, was the case.

 

On another note, is NSN out deploying b41 on Sprint sites yet? If Sprint is to get the first 100 million online with b41 before the year is out then I would imagine they need to get a massive move on.

They are.

 

Sent from my Nexus 5

  • Like 1
Link to comment
Share on other sites

So will b41 also suffer from ecsfb issues when it is first turned on on Sprint NV sites (the way b26 did/does)?

Here in Jacksonville before we were officially a spark market I experienced eCSFB issues on b41. I was running my nexus 5 on the .15 modem. I connected to the site but was in LTE only mode. Couldn't call or text.

 

 

For people with the new software you will get kicked to 3g.

 

Sent from my Nexus 7 using Tapatalk

Link to comment
Share on other sites

Here in Jacksonville before we were officially a spark market I experienced eCSFB issues on b41. I was running my nexus 5 on the .15 modem. I connected to the site but was in LTE only mode. Couldn't call or text.

 

 

For people with the new software you will get kicked to 3g.

 

Sent from my Nexus 7 using Tapatalk

Lovely.  Well the spotty Clear towers that have already been converted to LTE here are, fortunately, nowhere near my home nor my work.  Once the Sprint installs of LTE on NV sites really crank up then I guess I will have to suffer through it.  

 

But I can always just disable band 41 during these growing pains and reenable it once it's stable. 

Link to comment
Share on other sites

So will b41 also suffer from ecsfb issues when it is first turned on on Sprint NV sites (the way b26 did/does)?

 

Not really sure about that right now. People are able to connect to them just fine in Chicago and Las Vegas, but that's Samsung and Alcatel Lucent. Nokia is doing the deployment in Atlanta. We haven't seen any Nokia installs yet that I'm aware of.

Link to comment
Share on other sites

Not really sure about that right now. People are able to connect to them just fine in Chicago and Las Vegas, but that's Samsung and Alcatel Lucent. Nokia is doing the deployment in Atlanta. We haven't seen any Nokia installs yet that I'm aware of.

Whatever the outcome, I am certain NSN will do an exponentially better job than Ericsson could or would have.  

 

The installs from NSN are due to begin in July.  I believe I read that on one of these forums here.  It will be awesome to have those sorts of speeds that band 41 can deliver but in all honesty I don't have any issues at all with the LTE speeds here in Atlanta on bands 25 and 26.  This will all just be proverbial icing on the proverbial cake.  

Link to comment
Share on other sites

Whatever the outcome, I am certain NSN will do an exponentially better job than Ericsson could or would have.  

 

The installs from NSN are due to begin in July.  I believe I read that on one of these forums here.  It will be awesome to have those sorts of speeds that band 41 can deliver but in all honesty I don't have any issues at all with the LTE speeds here in Atlanta on bands 25 and 26.  This will all just be proverbial icing on the proverbial cake.  

 

Supposedly Nokia installs are underway, we just don't have any photographic evidence yet.

  • Like 1
Link to comment
Share on other sites

It is unlikely 8T8R sites will have eCSFB problems. They are on mature NV sites and will be connected directly to the Sprint Core. The Clearwire B41 sites needed to have their cores upgraded to allow eCSFB.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

I work for JCI and found this article interesting.  At least the airport should be covered regardless of carrier.  If only this was the norm, not the exception.

 

When people travel today, they can't afford to stop working. That's why the Hartsfield-Jackson Atlanta International Airport (ATL) in Georgia, USA – the busiest airport in the world – selected Johnson Controls to install and support upgraded wireless internet access. Thanks to our team, 15,000 simultaneous users can now access free Wi-Fi – a seven-fold increase over the previous system.

It's all part of a $5.6 million contract that will help serve more than 94 million passengers annually. In a recent media statement, Atlanta Mayor Kasim Reed said, "At the world's busiest and most efficient airport, we must continually look to meet and exceed the demands of our customers. Wi-Fi is no longer considered an amenity; it is a necessity for today's travelers."

 

EDIT: Meant to include the source link.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Getting some good Band 26 on my new G3 inside my house.

 

Mav. ;ninja;

 

Sent from the future on my Sprint LG G3.

A few months ago, we never thought we would see B26 speeds like that in Georgia, Alabama, Mississippi or the Florida Panhandle. It's awesome to see Sprint work with SouthernLinc to establish a full 5MHz LTE carrier for B26 down there.

 

Robert via Nexus 5 using Tapatalk

  • Like 3
Link to comment
Share on other sites

A few months ago, we never thought we would see B26 speeds like that in Georgia, Alabama, Mississippi or the Florida Panhandle. It's awesome to see Sprint work with SouthernLinc to establish a full 5MHz LTE carrier for B26 down there.

 

Robert via Nexus 5 using Tapatalk

Yeah, since band 26 is basically everywhere now(at least for me it is) things are running smooth as hell every where I go. The only area where things are horrible is at the airport but that"s to be expected from every carrier at the world's busiest airport.
  • Like 4
Link to comment
Share on other sites

  • 3 weeks later...

How about north of Atlanta? Any speeds improvements? Seems like B26 is all over the south side.

Everywhere I go up here is solid Band 26. All of my speed tests are on the North side.

As soon as they get some Band 41 rockin', we will be all set.

 

Mav. :ninja:

 

Sent from Area 51 on my Sprint LG G3.

  • Like 2
Link to comment
Share on other sites

When I was in the airport today an LTE-only cycle back to LTE + CDMA on my Nexus 5 got me onto B41. Regualr LTE (B26) was okay (vs. the last time I went through ATL), but where I could get it at above -116 RSRP B41 was pretty nice, at ~20 Mbps down and 5-10 Mbps up. Now, T-Mobile was nicer at basically 20M symmetric but it's nice to see things working much better in the airport (I was in concourses B and C).

  • Like 1
Link to comment
Share on other sites

Neal was telling me on Twitter that his Sprint experience in Atlanta was really bad and that he was plagued with eCSFB issues. Do you guys find that to be the case? Here's the link to the conversation: https://twitter.com/Det_Conan_Kudo/status/497593816069976064

No disrespect to Neal, but I don't think that it's much of a stretch to say that he tends to paint things in the worst possible light when it comes to Sprint....And do the exact opposite when it comes to T-Mobile. It's probably a good idea to solicit additional viewpoints as you're doing here.

 

Sent from my SM-N900P using Tapatalk

  • Like 2
Link to comment
Share on other sites

Bands 25 and 26 are both now essentially ubiquitous all over the entire metro Atlanta area. There aare - and will always be - key problem areas. But this is RF we're talking about. Nothing is perfect but the Sprint network in Atlanta is strong. My only problem really is my Nexus 5. It seems to have issues sticking with connections and unnecessarily reverting to 3g when strong LTE connections are otherwise available.

  • Like 5
Link to comment
Share on other sites

Neal was telling me on Twitter that his Sprint experience in Atlanta was really bad and that he was plagued with eCSFB issues. Do you guys find that to be the case? Here's the link to the conversation: https://twitter.com/Det_Conan_Kudo/status/497593816069976064

Earlier in the year there were lots of ecsfb issues but definitely not now. Band 25/26 is literally everywhere, band 41 is kinda hit or miss though.

  • Like 4
Link to comment
Share on other sites

Earlier in the year there were lots of ecsfb issues but definitely not now. Band 25/26 is literally everywhere, band 41 is kinda hit or miss though.

This ^^. But the NSN Sprint band 41 rollout is now underway and through those 8T8R radios and also with beamforming, I am hoping to see 2.5LTE become nearly just as ubiquitous as PCS LTE (here in the A and across the nation as well).

Link to comment
Share on other sites

  • 1 month later...

:( Anyone on the southside or any where else around atlanta experiencing any issues?  For the last couple of days I haven't been able to connect to band 26 at all and it seems like ecsfb issues are back.  Me and my girl have missed a bunch of calls and the only time we realize it is when we get a voicemail notification after the fact.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...