Jump to content

Network Vision/LTE - Chicago Market


thesickness069

Recommended Posts

ok so as expected they dont know anything except what they are doing themselves. They will be finished by tomorrow. i saw the radios on the ground and they are much bigger then i thought. It was interesting though' date=' they said they didnt work for samsung. this is tower CH50XC246[/quote']

 

They are subcontractors.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

I was collecting Intel at the sprint store yesterday. According to the guys at the sprint store... the tech that was putting the LTE extender/transmitter in their back room said that they will be ready at latest September 1st.

Link to comment
Share on other sites

I'm connected to the tower that workers were at that I referenced earlier. I'm wondering why when I look at the info on net monitor app that it has two different 'cell tower' numbers at the same site? example it switched between tower 618 and 619 at the same location.

Link to comment
Share on other sites

I'm connected to the tower that workers were at that I referenced earlier. I'm wondering why when I look at the info on net monitor app that it has two different 'cell tower' numbers at the same site? example it switched between tower 618 and 619 at the same location.

 

It's the same site. The site number is 61. The sector number connected to at that site is 8 or 9.

 

I love next to a site that has BSIDs of 8097 and 8098.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

It's the same site. The site number is 61. The sector number connected to at that site is 8 or 9.

 

In my experience, the sector-based BSID numbers on a tower are sequential, but it is not as simple as trimming the last digit and calling it the site number. For example, one hypothetical tower could have BSIDs 198, 199 and 200. I have seen multiple examples of that. I think the BSID is just a sector number, and Netmonitor does not report a site number.

Link to comment
Share on other sites

 

In my experience' date=' the sector-based BSID numbers on a tower are sequential, but it is not as simple as trimming the last digit and calling it the site number. For example, one hypothetical tower could have BSIDs 198, 199 and 200. I have seen multiple examples of that. I think the BSID is just a sector number, and Netmonitor does not report a site number.[/quote']

 

Interesting. I have never seen that in my observations here in New Mexico. In one place we have a 8018, 8019 and an 8020. However, the 801 and 802 are two different nearby sites. Because if you drive around the 802 site, you will also see a 8021 and 8022. And on the other side of the 801 site, there is also a 8017.

 

However, we have seen anomalies between our markets in past comparisons. Interesting...

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

Hey everyone,

 

Anyone have any info on the near west burbs in Chicago (Oak Park, Berwyn, Forest Park)? Data service has been steadily getting worse over the last month or so. Average is now 25kbps on 3G.

 

Also I work in Oakbrook and the speeds have been off since late last week. Usually I'm clocking in at an average of 1.5 to 2.0 mbps on 3G and since Friday been barely clocking in at at 512kbps

Link to comment
Share on other sites

Hey everyone,

 

Anyone have any info on the near west burbs in Chicago (Oak Park, Berwyn, Forest Park)? Data service has been steadily getting worse over the last month or so. Average is now 25kbps on 3G.

 

Also I work in Oakbrook and the speeds have been off since late last week. Usually I'm clocking in at an average of 1.5 to 2.0 mbps on 3G and since Friday been barely clocking in at at 512kbps

I'd help you out, but you're a Sox fan.

 

Seriously though, That info can be found in the Sponsor maps.

Link to comment
Share on other sites

Hey everyone,

 

Anyone have any info on the near west burbs in Chicago (Oak Park, Berwyn, Forest Park)? Data service has been steadily getting worse over the last month or so. Average is now 25kbps on 3G.

 

Also I work in Oakbrook and the speeds have been off since late last week. Usually I'm clocking in at an average of 1.5 to 2.0 mbps on 3G and since Friday been barely clocking in at at 512kbps

 

I'm not a sponsor, but I'd guess within a month or so. Whenever they start working on downtown because Berwyn is closer to the loop which is the last area getting the upgrades.

Link to comment
Share on other sites

There is hope for Chicago. Have been suffering with poor 3G for the longest time only thing keeping me was WiMAX but now for some reason I'm seeing slower speeds. Can't wait for LTE launch here in chi town.

Link to comment
Share on other sites

My 3G speeds in the west burbs have been a mixed bag, but generally pretty good. I hit a tower in Carol Stream that gave me >2.0mbps, and the lowest I've seen is ~300kbps. It's strange seeing such a wide range of speeds with little consistency between towers, at least coming from my last carrier (USCC).

Link to comment
Share on other sites

My recent experience: coverage along Lake Cook Rd. through Wheeling, Buffalo Grove and Deerfield has basically been trashed this week. No bars, no "3G" icon. Data very, very slow to non-existant. Voice calls don't really work.

 

Schaumburg seems to be working a bit better, I've seen 3G data speeds up to 2mbps along 355. Bloomingdale, Carol Stream are working better as well (as noted above)

 

Further south, Roosevelt through Glen Ellyn, Wheaton etc to West Chicago remains very spotty. Crazy signal readings: no bars, five bars, back to no bars etc. Butterfield is also a mess from Oakbrook all the way to Batavia. Hopefully this is the low point for western suburbs, it's obviously driving me crazy.
Edited by Hiro11
Link to comment
Share on other sites

i regularly get .2 - .5 mbps down speeds on 3g. it is pretty bad. most of my pings are around 15-200 but i will get over 600 a few times a day. this is in the north suburbs.

 

I was surprised to see the speed results on mellimel2212 showed it on teh evdoA network. i have been all over Chicago land both north and south and i am always on the ehrpd network.

Link to comment
Share on other sites

eHRPD is just a software standard to help LTE and EVDO communicate, it's not a network itself like "3G". So when it says eHRPD on your connection, it's still only 3g (EVDO revA)

ya i understand that but isnt it applied to an entire market through the network core? if it is then i would think it would be seen in an entire market
Link to comment
Share on other sites

ya i understand that but isnt it applied to an entire market through the network core? if it is then i would think it would be seen in an entire market

 

The exact method of eHRPD deployment is still a mystery. At least, to me it is. We know it appears. We know it does not appear consistently when it appears. We know sometimes it appears in markets that have not even started Network Vision yet. I would love to know more.

 

Robert

Link to comment
Share on other sites

My recent experience: coverage along Lake Cook Rd. through Wheeling, Buffalo Grove and Deerfield has basically been trashed this week. No bars, no "3G" icon. Data very, very slow to non-existant. Voice calls don't really work.

 

Schaumburg seems to be working a bit better, I've seen 3G data speeds up to 2mbps along 355. Bloomingdale, Carol Stream are working better as well (as noted above)

 

Further south, Roosevelt through Glen Ellyn, Wheaton etc to West Chicago remains very spotty. Crazy signal readings: no bars, five bars, back to no bars etc. Butterfield is also a mess from Oakbrook all the way to Batavia. Hopefully this is the low point for western suburbs, it's obviously driving me crazy.

I work in lincolnshire and it's not unusual for me to get 1-2 mbit at my desk.

Link to comment
Share on other sites

I was surprised to see the speed results on mellimel2212 showed it on teh evdoA network. i have been all over Chicago land both north and south and i am always on the ehrpd network.

 

If mellimel took those speed tests using the Nexus S in his "Phones/Devices" list, it would explain why he was on EVDO rev A. The Nexus S is incapable of using eHRPD and would connect to the cell site through EVDO.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Excuse my rookie comments here, but after enabling *#73#, it seems that the rainbow sim V2? requires n70 (I turned it off along with n71 - was hoping to track n66) to be available else it switches to T-Mobile.  So this confirms my suspicion that you need to be close to a site to get on Dish.  Have no idea why they don't just use plmn. To test, I put it into a s21 ultra, rebooted twice, came up on T-Mobile (no n70 on s21).  Tried to manually register on 313340, but it did not connect (tried twice). I am on factory unlocked firmware but used a s22 hack to get *#73# working.  Tried what you were suggesting with a T-Mobile sim partially installed, but that was very unstable with Dish ( I think they had figured that one out).  [edit: and now I see Boost sent me a successful device swap notice which says I can now begin to use my new device.  Sigh.  Will try again later and wait for this message - too impatient.]
    • Hopefully this indicates T-Mobile hasn't completely abandoned mmwave and/or small cells? But then again this is the loop, so take that as you will. Hopefully now that most macro activity is done (besides rural colo/builds), they will start working on small cells.   
    • This has been approved.. https://www.cnet.com/tech/mobile/fcc-approves-t-mobiles-deal-to-purchase-mint-mobile/  
    • In the conference call they had two question on additional spectrum. One was the 800 spectrum. They are not certain what will happen, thus have not really put it into their plans either way (sale or no sale). They do have a reserve level. Nationwide 800Mhz is seen as great for new technologies which I presume is IOT or 5g slices.  T-Mobile did not bite on use of their c-band or DOD.  mmWave rapidly approaching deadlines not mentioned at all. FWA brushes on this as it deals with underutilized spectrum on a sector by sector basis.  They are willing to take more money to allow FWA to be mobile (think RV or camping). Unsure if this represents a higher priority, for example, FWA Mobile in RVs in Walmart parking lots working where mobile phones need all the capacity. In terms of FWA capacity, their offload strategy is fiber through joint ventures where T-Mobile does the marketing, sales, and customer support while the fiber company does the network planning and installation.  50%-50% financial split not being consolidated into their books. I think discussion of other spectrum would have diluted the fiber joint venture discussion. They do have a fund which one use is to purchase new spectrum. Sale of the 800Mhz would go into this. It should be noted that they continue to buy 2.5Ghz spectrum from schools etc to replace leases. They will have a conference this fall  to update their overall strategies. Other notes from the call are 75% of the phones on the network are 5g. About 85% of their sites have n41, n25, and n71, 90% 5g.  93% of traffic is on midband.  SA is also adding to their performance advantage, which they figure is still ahead of other carriers by two years. It took two weeks to put the auction 108 spectrum to use at their existing sites. Mention was also made that their site spacing was designed for midrange thus no gaps in n41 coverage, while competitors was designed for lowband thus toggles back and forth for n77 also with its shorter range.  
    • The manual network selection sounds like it isn't always scanning NR, hence Dish not showing up. Your easiest way to force Dish is going to be forcing the phone into NR-only mode (*#*#4636#*#* menu?), since rainbow sims don't support SA on T-Mobile.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...