Jump to content

US Cellular completes LTE deployment, starts implementing roaming


bigsnake49

Recommended Posts

US Cellular announce that they now cover 99% of their postpaid customers with LTE and they are rolling out roaming agreements with multiple unnamed roaming partners. Has anybody seen signs of LTE roaming on USCC?

 

http://www.fiercewireless.com/story/us-cellular-completes-lte-buildout-and-begins-lte-roaming-q4-performance-be/2016-02-19

 

Link to comment
Share on other sites

US Cellular announce that they now cover 99% of their postpaid customers with LTE and they are rolling out roaming agreements with multiple unnamed roaming partners. Has anybody seen signs of LTE roaming on USCC?

 

Yes.  This is old news.  The Sprint coverage tool has shown and some S4GRU members have reported LTE roaming on USCC since late last year.

 

http://s4gru.com/index.php?/blog/1/entry-401-psa-lte-roam-if-you-want-to-plus-it-may-count-as-native-coverage/

 

AJ

Link to comment
Share on other sites

Yes.  This is old news.  The Sprint coverage tool has shown and some S4GRU members have reported LTE roaming on USCC since late last year.

 

http://s4gru.com/index.php?/blog/1/entry-401-psa-lte-roam-if-you-want-to-plus-it-may-count-as-native-coverage/

 

AJ

 

Sorry, I was under the impression that roaming was limited to EVDO.

Link to comment
Share on other sites

Sorry, I was under the impression that roaming was limited to EVDO.

 

No, there is LTE.  That is why you see LTE roaming on Sprint's coverage map.  Wife's Galaxy S6 has seen 700LTE roaming in Washington and NC. It is fast too. :-D Shoot, even the 3G is fast. lol

Link to comment
Share on other sites

I didn't get LTE roaming on USCC in November (only EVDO), but that has been my only experience lately.

I believe that unlocked handsets, like Nexus devices, will not roam on USCC.

 

Using Tapatalk on Note 8.0

Link to comment
Share on other sites

I believe that unlocked handsets, like Nexus devices, will not roam on USCC.

Oh. Yeah, that's what I'm sporting, a Nexus 6. That's dumb. :-)

 

To be clear, USCC EV-DO roaming works fine, just no LTE roaming at this time.  We shall see if that changes.

 

AJ

  • Like 2
Link to comment
Share on other sites

To be clear, USCC EV-DO roaming works fine, just no LTE roaming at this time. We shall see if that changes.

 

AJ

Yes, I was implying just LTE would not roam. Thanks for the clarification.

 

Using Tapatalk on Note 8.0

Link to comment
Share on other sites

Has anybody seen LTE roaming on a Project fi phone?

My Nexus 6 would not roam on LTE in Nebraska on Viaero. But would roam on HSPA+. However my OnePlus 2 with a Tmo SIM would roam on Viaero LTE in the same places.

 

Sprint seems it has not enabled unlocked devices to be able to roam on LTE, even on Project Fi. Whereas Tmo seems to allow it on unlocked devices...except on Project Fi.

 

Using Tapatalk on Note 8.0

Link to comment
Share on other sites

Have any technical reasons been uncovered as to why Nexus devices, or better yet, unlocked devices, can not roam on LTE yet?

Not that I'm aware of. And Tmo does not have the limitation. Seems like it could be done, if desired.

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

  • 3 months later...

So, first off, I upgraded to the LG G5 in May which supported LTE roaming.  Finally got a chance to sit in US Cellular territory recently and here's what was seen at my in-laws' house:

 

TH5zoIR.png

 

I had been wondering how the phone would know when to LTE roam and when not to, given the presence of 3G-only areas of the Sprint network.  It appears that whenever I am LTE roaming, SRLTE is enabled, which thus shows 1X and LTE at the same time.  However, the moment the 1X side of things jumps to Sprint, I immediately lose LTE roaming.  My guess is that this is the deciding factor on whether or not a device is allowed to LTE roam--the availability of SRLTE.

 

Of course, this behavior made my in-laws' house very tricky, because every so often the phone would jump to a very, very weak (-105 dBm) 1X 800 from 10-15 miles away.  Every time it did, I would lose LTE roaming, and all other service, until it gave up and went back to US Cellular.  My parents' house, when I visit, should not have this problem, since there is no Sprint service for miles and miles.

 

That being said, it worked very well when connected to US Cellular.  Of course, EV-DO roaming STILL doesn't work, despite the fact that LTE roaming works on this device.  It's very strange.

 

- Trip.

  • Like 1
Link to comment
Share on other sites

So, first off, I upgraded to the LG G5 in May which supported LTE roaming.  Finally got a chance to sit in US Cellular territory recently and here's what was seen at my in-laws' house:

 

I had been wondering how the phone would know when to LTE roam and when not to, given the presence of 3G-only areas of the Sprint network.  It appears that whenever I am LTE roaming, SRLTE is enabled, which thus shows 1X and LTE at the same time.  However, the moment the 1X side of things jumps to Sprint, I immediately lose LTE roaming.  My guess is that this is the deciding factor on whether or not a device is allowed to LTE roam--the availability of SRLTE.

 

Of course, this behavior made my in-laws' house very tricky, because every so often the phone would jump to a very, very weak (-105 dBm) 1X 800 from 10-15 miles away.  Every time it did, I would lose LTE roaming, and all other service, until it gave up and went back to US Cellular.  My parents' house, when I visit, should not have this problem, since there is no Sprint service for miles and miles.

 

That being said, it worked very well when connected to US Cellular.  Of course, EV-DO roaming STILL doesn't work, despite the fact that LTE roaming works on this device.  It's very strange.

 

- Trip.

 

It's good to see LTE roaming working, but at the same time it does sound like it's a battery killer.  Still better than nothing.

Link to comment
Share on other sites

When I've been in some roaming territory, the battery drains a little faster, but it isn't much and the phones don't get hot.   

 

I haven't tested on my wife's phone if EV-DO works on USCC because her LTE works fine and its always fast, but on my BYOP USCC 3G works very well and is always 1~2.5Mbps.

 

The only thing I have noticed, at least on my phone, when entering USCC territory is that CDMA doesn't work at all.  I get the exclamation mark and even talk/text don't work.  I have to reboot my phone and then all is fine.  Now, this could maybe just be a Android N issue?  But I didn't have to restart my phone for BlueGrass Cellular or Appalachian Wireless.

Link to comment
Share on other sites

 

 

I had been wondering how the phone would know when to LTE roam and when not to, given the presence of 3G-only areas of the Sprint network. It appears that whenever I am LTE roaming, SRLTE is enabled, which thus shows 1X and LTE at the same time. However, the moment the 1X side of things jumps to Sprint, I immediately lose LTE roaming. My guess is that this is the deciding factor on whether or not a device is allowed to LTE roam--the availability of SRLTE.

Isn't it just that whenever it is connected to Sprint, it will not roam at all? Since you're on the Sprint network? I would be surprised if you could roam on USCC LTE while connected to Sprint 1x.

 

Back when I monitored CDMA networks extensively, it used to be that when you were roaming on 1x, you could connect to Sprint EVDO too, if it came in range. But you could not be connected to Sprint 1x and roam on EVDO. The rule basically is, if you can get a Sprint native 1x signal, then no roaming. The network considers you home.

 

I would guess it's not so much the device knows no SRLTE is available and thus stops roaming, but rather the CDMA stays in scan while LTE roaming (SRLTE mode), and if it finds and connects to Sprint network (even if just 1x), the LTE roaming session ends because the device is now native. That could appear as if SRLTE was shut down at that time.

 

Just a hypothesis on my part. But I have no way to check myself.

 

 

Using Tapatalk on Note 8.0

Link to comment
Share on other sites

Isn't it just that whenever it is connected to Sprint, it will not roam at all? Since you're on the Sprint network? I would be surprised if you could roam on USCC LTE while connected to Sprint 1x.

 

Back when I monitored CDMA networks extensively, it used to be that when you were roaming on 1x, you could connect to Sprint EVDO too, if it came in range. But you could not be connected to Sprint 1x and roam on EVDO. The rule basically is, if you can get a Sprint native 1x signal, then no roaming. The network considers you home.

 

I would guess it's not so much the device knows no SRLTE is available and thus stops roaming, but rather the CDMA stays in scan while LTE roaming (SRLTE mode), and if it finds and connects to Sprint network (even if just 1x), the LTE roaming session ends because the device is now native. That could appear as if SRLTE was shut down at that time.

 

Just a hypothesis on my part. But I have no way to check myself.

 

 

Using Tapatalk on Note 8.0

 

You're missing my point.  Normally, my phone shows me LTE only--no 1X.  However, while I was roaming, I was continually seeing both 1X and LTE.  So I believe this is the way the phone determines whether or not it should be LTE roaming.

 

- Trip

Link to comment
Share on other sites

You're missing my point.  Normally, my phone shows me LTE only--no 1X.  However, while I was roaming, I was continually seeing both 1X and LTE.  So I believe this is the way the phone determines whether or not it should be LTE roaming.

 

- Trip

 

I think you're both saying the same thing, just different ways.

 

Anyway, my experience has been the same. While roaming on NexTech in Kansas, I see 1x and LTE at the same time the entire time. The first time I was able to connect back in January, SCP showed 1x800 Sprint and NTW LTE at the same time, but I think that was an error. This month on the I-70 drive, I saw NTW 1x and NTW LTE. Anytime the 1x signal latched onto Pioneer or United Wireless, I would disconnect from NTW LTE. 

 

Additionally, I noticed that every time I switched sectors, sites or bands LTE would disconnect. My theory was it was re-authenticating the connection every time something changed. Got rather annoying.

Link to comment
Share on other sites

I've still yet to connect to US Cellular LTE with my Note 5.

 

No kidding.  Still nothing with the Nexus 5X either.  Not real happy about it, especially since the maps were updated to show that it can.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...