Jump to content

Sprint LTE Coverage Maps via Sensorly


Recommended Posts

On 1/9/2019 at 12:56 PM, jamesinclair said:

Just read through the google app store reviews and it looks like the app died 4 months ago.

 

Wish I hadnt wasted my time.

If that's the case and someone can confirm, that would be very helpful to those of us that try to help fill out map coverage.   If not sensorly, I am sure there is or can be another to pick up the slack (albeit from scratch)

Link to comment
Share on other sites

11 minutes ago, JohnHovah said:

If that's the case and someone can confirm, that would be very helpful to those of us that try to help fill out map coverage.   If not sensorly, I am sure there is or can be another to pick up the slack (albeit from scratch)

That's funny the link is alive and well, my sprint rewards

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...
2 hours ago, mattp said:

is any one still in this topic 

what is the data usage of the app any way to limit it just to wifi i am on a limit data place becaser i doint want to speed much mony for data 

Most of us have abandoned ship because it does not get recorded into the main map from many phones.  Root metrics hexagon based coverage maps or cell mapper (if you are in a non spreadsheet market) are recommended.  SCP Pro recommended for active spreadsheet markets.  Most have ways to defer sending data which can then be done over WiFi.

  • Like 2
Link to comment
Share on other sites

36 minutes ago, dkyeager said:

Most of us have abandoned ship because it does not get recorded into the main map from many phones.  Root metrics hexagon based coverage maps or cell mapper (if you are in a non spreadsheet market) are recommended.  SCP Pro recommended for active spreadsheet markets.  Most have ways to defer sending data which can then be done over WiFi.

Agreed. I gave up on Sensorly when it stopped recording and they stopped responding to me.

I use the RootMetrics App regularly in the DC Area and up in Bethesda. Mapped a number of hexes around Downtown DC the other day. Saw some substantial improvements and turned a bunch of hexes darker blue with faster speed tests. Eliminated a few orange hexes as well. Reported the slow areas in the My Sprint App. Great way to get more steps in! 😀

  • Like 1
Link to comment
Share on other sites

3 minutes ago, RedSpark said:

Agreed. I gave up on Sensorly when it stopped recording and they stopped responding to me.

I use the RootMetrics App regularly in the DC Area and up in Bethesda. Mapped a number of hexes around Downtown DC the other day. Saw some substantial improvements and turned a bunch of hexes darker blue with faster speed tests. Eliminated a few orange hexes as well. Reported the slow areas in the My Sprint App. Great way to get more steps in! 😀

wow you much have lot of mony i can't aford to do sped test on the cell network i pay per mb it is the only plan i can aford i may pay about a mont or 2 of regular unlimited  over a whole year 

Link to comment
Share on other sites

30 minutes ago, mattp said:

wow you much have lot of mony i can't aford to do sped test on the cell network i pay per mb it is the only plan i can aford i may pay about a mont or 2 of regular unlimited  over a whole year 

I'm on an Unlimited Freedom family plan with 7 lines and a $5/month Corporate discount for each line, so my overall cost is pretty good.

Unlimited Basic is $60/Month with AutoPay/eBill.

The 2 GB plan is $40/Month with AutoPay/eBill.

Sprint offers $5/month Corporate Discount, but if you're a member of a Credit Union, check this out: https://www.lovemycreditunion.org/sprintcreditunionmembercashrewards

  • Like 1
Link to comment
Share on other sites

2 hours ago, RedSpark said:

I'm on an Unlimited Freedom family plan with 7 lines and a $5/month Corporate discount for each line, so my overall cost is pretty good.

Unlimited Basic is $60/Month with AutoPay/eBill.

The 2 GB plan is $40/Month with AutoPay/eBill.

Sprint offers $5/month Corporate Discount, but if you're a member of a Credit Union, check this out: https://www.lovemycreditunion.org/sprintcreditunionmembercashrewards

still it is more then what i am paying a year for tello as long as i use the phone ever 3 month which is not a isuse i just pay for what i use it could be as low as 10$ for the whole year i think some where around 50$ i use only about 200mb a month and the odd tex mesage  her or there most time i am on wifi 

  • Like 2
Link to comment
Share on other sites

22 minutes ago, mattp said:

still it is more then what i am paying a year for tello as long as i use the phone ever 3 month which is not a isuse i just pay for what i use it could be as low as 10$ for the whole year i think some where around 50$ i use only about 200mb a month and the odd tex mesage  her or there most time i am on wifi 

Wow. That’s a completely different usage pattern. Sounds like it works for you.

  • Like 1
Link to comment
Share on other sites

1 hour ago, RedSpark said:

Wow. That’s a completely different usage pattern. Sounds like it works for you.

yep my family is a small user we doint like cell phone bill get clsoe to size of a second motorage it is evne a some what old cell phone that i full own 

Link to comment
Share on other sites

  • 5 months later...

Hello, anyone else not seeing their map results show up on the Sensorly maps? Is it because I am using the iPhone App?

I keep Sensorly open and Map the same trip over and over again.


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

1 hour ago, techfranz said:

Hello, anyone else not seeing their map results show up on the Sensorly maps? Is it because I am using the iPhone App?

I keep Sensorly open and Map the same trip over and over again.
 

Sensorly appears to have died (see above).

  • Like 1
Link to comment
Share on other sites

4 hours ago, techfranz said:

I wishthere was an IOS version of Cellmapper, but I will try Rootmetrics and maybe Open Signal.

I really enjoy using Rootmetrics on iOS.

Link to comment
Share on other sites

If you are driving about 45 mph how do you make sure the Rootmetrics APP is Harvesting Data?

Do you need to run continuous tests or just have Map View open?

Also what is the average processing time for the data?

Link to comment
Share on other sites

Go into the App settings and make sure that the background “Baseline Data Collection” toggle is enabled and set to upload over any network. This updates the “Best Technology Found” Map Layer in the background as you travel.

You can also run speed tests continuously for the “Fastest Speed Found” Map Layer. This is under the speed test settings. I’m not sure how speeds tests are counted across the hexes. I believe that download and upload data results are treated separately, such that you can have a download result in one hex and an upload in another hex from a single test cycle, if you’re traveling. I’m not sure if downloads and uploads extend across hexes, such that a download result will count for multiple hexes.

I’ve seen hexes update with my speed tests within a couple hours. If a hex has no data points, I believe it takes a few speed tests to get results registered on the “Fastest Speed Found” Map Layer.

I believe these speed tests also apply to the “Best Technology Found” layer as well.

If you plan to run continuous speed tests in the App while traveling, you should do it while your device is plugged into a car charger or plugged into an external battery pack.

  • Like 1
Link to comment
Share on other sites

1 hour ago, RedSpark said:

Go into the App settings and make sure that the background “Baseline Data Collection” toggle is enabled and set to upload over any network. This updates the “Best Technology Found” Map Layer in the background as you travel.

You can also run speed tests continuously for the “Fastest Speed Found” Map Layer. This is under the speed test settings. I’m not sure how speeds tests are counted across the hexes. I believe that download and upload data results are treated separately, such that you can have a download result in one hex and an upload in another hex from a single test cycle, if you’re traveling. I’m not sure if downloads and uploads extend across hexes, such that a download result will count for multiple hexes.

I’ve seen hexes update with my speed tests within a couple hours. If a hex has no data points, I believe it takes a few speed tests to get results registered on the “Fastest Speed Found” Map Layer.

I believe these speed tests also apply to the “Best Technology Found” layer as well.

If you plan to run continuous speed tests in the App while traveling, you should do it while your device is plugged into a car charger or plugged into an external battery pack.

Thanks!

Link to comment
Share on other sites

1 hour ago, techfranz said:

Thanks!

You’re welcome!

Doing speed tests and network mapping  while walking around town is a great way to get exercise and explore new areas. It’s also pretty cool seeing how Sprint’s improved in certain areas.

If you experience slow speeds when testing in an area, you should report the issue in the My Sprint App.

Link to comment
Share on other sites

Well I am going to give up on mapping with Rootmetrics and Open Signal. I wonder if they don’t publish results when a user has a VPN or is using Sprint VoLTE. No sense wasting a bunch of time on mapping a Network if the results don’t end up on the map.

Link to comment
Share on other sites

Well I am going to give up on mapping with Rootmetrics and Open Signal. I wonder if they don’t publish results when a user has a VPN or is using Sprint VoLTE. No sense wasting a bunch of time on mapping a Network if the results don’t end up on the map.

A VPN will skew the results. You should not have a VPN on whole doing speed test mapping. VoLTE will not matter, they operate on different EUTRA sessions https://s4gru.com/entry/439-sprints-casting-call-of-voice-over-actors-an-in-depth-analysis-of-volte-calling-and-vowifi/ it shouldn't even be able to tell that you have VoLTE on. 

That being said, if you're on an active VoLTE call, then that may affect things. Recently, Sprint started preferring dropping to band 26 during tower handoffs while on a VoLTE call. So a call may start out on B41, but if you're moving, when it hands off to the next tower it often switches to B26. This improves VoLTE performance and quality, but will result in slower data speeds and showing B26 available instead of b25 or b41 in your mapping. Congestion on B26 has no effect at all on VoLTE calls, but will be reflected in speed tests performed while on the call

 

Sent from my Pixel 3 XL using Tapatalk

 

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • So, in summary, here are the options I tested: T-Mobile intl roaming - LTE on SoftBank, routes back to the US (~220ms to 4.2.2.4) IIJ physical SIM - LTE on NTT, local routing Airalo - LTE on SoftBank and KDDI (seems to prefer SoftBank), routed through Singapore (SingTel) Ubigi - 5G on NTT, routed through Singapore (Transatel) US Mobile East Asia roaming - 5G on SoftBank, routed through Singapore (Club SIM) Saily - 5G on NTT, routed through Hong Kong (Truphone)...seems to be poorer routing my1010 - LTE on SoftBank and KDDI (seems to prefer KDDI), routed through Taiwan (Chunghwa Telecom) I wouldn't buy up on the T-Mobile international roaming, but it's a solid fallback. If you have the US Mobile roaming eSIM that's a great option. Otherwise Ubigi, Airalo, or my1010 are all solid options, so get whatever's cheapest. I wouldn't bother trying to find a physical SIM from IIJ...the Japanese IP is nice but there's enough WiFi that you can get a Japanese IP enough for whatever you need, and eSIM flexibility is great (IIJ as eSIM but seems a bit more involved to get it to work).
    • So, the rural part of the journey still has cell service for nearly all the way, usually on B18/19/8 (depending on whether we're talking about KDDI/NTT/SoftBank). I think I saw a bit of B28 and even n28 early on in the trip, though that faded out after a bit. Once we got to where we were going though, KDDI had enough B41 to pull 150+ Mbps, while NTT and SoftBank had B1/B3 IIRC. Cell service was likewise generally fine from Kawaguchiko Station to Tokyo on the express bus to Shinjuku Station, though there were some cases where only low-band LTE was available and capacity seemed to struggle. I also figured out what I was seeing with SoftBank on 40 MHz vs. 100 MHz n77: the 40 MHz blocks are actually inside the n78 band class, but SoftBank advertises them as n77, probably to facilitate NR CA. My phone likely preferred the 40 MHz slices as they're *much* lower-frequency, ~3.4 GHz rather than ~3.9, though of course I did see the 100 MHz slice being used rather often. By contrast, when I got NR on NTT it was either n28 10x10 or, more often, 100 MHz n78. As usual, EMEA bands on my S24 don't CA, so any data speeds I saw were the result of either one LTE carrier or one LTE carrier plus one NR carrier...except for B41 LTE. KDDI seems to have more B41 bandwidth live at this point, so my1010 or Airalo works well for this, and honestly while SoftBank and NTT 5G (in descending order of availability) have 5G that's readily available it may be diminishing returns, particularly given that I still don't know how to, as someone not from Hong Kong, get an eSIM that runs on SoftBank 5G that isn't the USM "comes for free with the unlimited premium package" roaming eSIM (NTT is easy enough thanks to Ubigi). In other news, I was able to borrow someone's Rakuten eSIM and...got LTE with it. 40 Mbps down, 20 Mbps up, 40ms latency to Tokyo while in Tokyo...which isn't any worse than the Japan-based physical SIMs I had used earlier. But not getting n77 or n257 was disappointing, though I had to test the eSIM from one spot rather than bouncing around the city to find somewhere with better reception. It's currently impossible to get a SIM as a foreigner that runs on Rakuten, so that was the best I could do. Also, I know my phone doesn't have all the LTE and 5G bands needed to take full advantage of Japanese networks. My S24 is missing: B21 (1500 MHz) - NTT B11 (1500 MHz) - KDDI, SoftBank B42 (3500 MHz) - NTT, KDDI, SoftBank n79 (4900 MHz) - NTT Of the above, B42/n79 are available on the latest iPhones, though you lose n257, and I'm guessing you're not going to find B11/B21 on a phone sold outside Japan.
    • T-Mobile acquiring SoniqWave's 2.5 GHz spectrum  Another spectrum speculator down! T-Mobile is acquiring all of their BRS/EBS licenses and their leases. Details are lacking but it looks like T-Mobile might be giving them 3.45GHz in exchange in some of the markets where they're acquiring BRS/EBS to sweeten the deal and stay below the spectrum screen. Hopefully NextWave is at the negotiating table with T-Mobile so NYC can finally get access to the full BRS/EBS band as well.  — — — — — Edit: Turns out this is a spectrum swap where T-Mobile is basically giving them DoD spectrum in a bunch of markets in exchange for all of SoniqWave's BRS/EBS. SoniqWave will likely turn around and sell the DoD spectrum to AT&T whenever the FCC removes the 40MHz cap.
    • Maybe. The taller buildings on one side of the street all have Fios access and the NYCHA buildings are surrounded by Verizon macros that have mmWave. I don’t think this site will add much coverage. It’d be better off inside the complex itself.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...