Jump to content

Network Vision/LTE - Upstate New York Markets - Central & East (including Syracuse, Albany, Binghamton, Ithaca, Utica)


bstrignano

Recommended Posts

87 is now lit up almost all the way to saratoga :)

 

 

In addition, I can keep a signal up from northern part of Latham driving up to Mechanicville.

 

Also the student ghetto in Albany is very well covered.

 

They are tuning on and testing towers very actively right now.  If you look at the map I beleve the goal is to connect the run from Lake George down I-87 to NYC.  With Glenns Falls, Saratoga, Cliffton Park, Albany, and locations as far north as Poughkeepsie lit up along the highway.  The gaps are filling in.

Link to comment
Share on other sites

With LTE is see a massive drop in Speed based on signal speed. With -db in the 90 range the speeds are fine 15-20mbit, but most of the time unless there is a near clear line of sight to the tower, they come down to 3-8 with upload under 1 often.  At fist I thought this was isolated to Albany, since we are not launched and are in the buildout phase.  However in Boston and NYC this is the case as well.

 

When the signal might look fine, but the LTE stength is different and speed drops off very quick.

 

Is this a matter of the 1900mhz signal and penetration?

Link to comment
Share on other sites

anyone have any idea about lake George area? or am I in the wrong thread?

Lake George will eventually get lit up as part of the i-87.

 

If you follow the current towers they run through Warrensburg along the northway.  I dont see why Lake Goerge would not see service, at least where the outlets are at some point. 

 

If you look down the map, the towers along I-87 are comming online first in the more rural places. Yesterday my phone held a signal and switched off correctly from around east geenbush on I-90 through 2W on i-87, then picked it back up around exit 6 and held through 10 going north.

 

Also now much of Halfmoon gets some service, and good part of Clifton Park.  I cat get 1 bar or so of LTE inside my house.

Link to comment
Share on other sites

Looks like they may have been testing a new LTE tower on the west side of Syracuse yesterday. I saw it connect several times. EHRPD also reverted to EVDO for most of the afternoon.

 

Sent from my HTCONE using Tapatalk

 

 

Link to comment
Share on other sites

Picking up LTE in East Syracuse for the first time ever this morning.gaqybady.jpg9ujebuqe.jpg

 

Sent from my HTCONE using Tapatalk

 

Interesting to see that -105dbm is read as a 1 bar signal post-update on the HTC One. I typically think of that as 2 or 3 bars.

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Any chance the Central NY market will be launched earlier since its almost complete. There are only about 20 towers not upgraded yet. Why is a 4th round market almost complete before others markets?

  • Like 1
Link to comment
Share on other sites

Any chance the Central NY market will be launched earlier since its almost complete. There are only about 20 towers not upgraded yet. Why is a 4th round market almost complete before others markets?

Less towers. NYC for instance has over 1,000 sites by itself.

Link to comment
Share on other sites

Picked up some LTE in Kirkwood over the weekend around Trim Street.

 

 

The tower right off the highway near Colesville road appears to be broadcasting LTE. Very nice to have, kind of like a "Welcome to NY!" greeting coming up from PA. 

  • Like 1
Link to comment
Share on other sites

Is anyone in the Watertown area having service issues? My boyfriend lives near downtown Watertown and is having major service issues. Normally this area is an excellent voice coverage area, but tonight he is barely able to hold 1 bar of service. According to Sprint Zone's dashboard, he doesn't have any sort of "servcice alerts". Does anyone know of any specific towers being down? I'm trying to help him alleviate this problem so I'm turning to my favorite people. Any help at all would be appreciated :)

Link to comment
Share on other sites

  • 1 month later...

A few days ago there was a technician walking around the top of a Sprint-only tower in Endwell. It's been LTE/3G accepted for months now, could he have been hooking up the 800Mhz gear perhaps? It's not broadcasting, but maybe he was getting it ready for 800 1x/LTE soon?

Link to comment
Share on other sites

A few days ago there was a technician walking around the top of a Sprint-only tower in Endwell. It's been LTE/3G accepted for months now, could he have been hooking up the 800Mhz gear perhaps? It's not broadcasting, but maybe he was getting it ready for 800 1x/LTE soon?

Possibly. If you saw my previous post, you can ignore it. I thought I was in the Buffalo thread when I first responded.

 

Robert via Nexus 5 using Tapatalk

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Uploaded data without issues on Friday. Now with the latest update I am getting "Cluster #1 skipped: invalid file format detected. File exported for inspection." Doing same with all other clusters. Did this on 4 phones in a row.  Seems to work on s24 ultra just fine. On s21 ultra it says "web data upload failed. No data to send" although 8800 records were displayed. Now gives same error as above. I have not sent the data from 3 other phones.  All should have latest update.
    • After several months of testing, an update to SignalCheck Pro is rolling out on Google Play. It may take up to 48 hours to become available for download. Notable changes include: Added option to display site notes for NSA 5G-NR cells. Enabling this new option (Preferences > Display Settings > Show NSA 5G-NR Site Notes) will cause the app to make an "educated guess" as to what the most appropriate site note is linked to the connected NSA 5G cell, using the PCI and the device location. If it finds an existing entry that is likely to be relevant, it will display the note along with the distance from where the strongest signal from that cell was logged. While connected to NSA 5G, these notes cannot be edited; a valid NCI is required to add/edit notes and that information is not available on NSA connections.   Added option to log cells with missing/invalid PLMN (such as NSA 5G-NR cells). Users asked for the ability to log data for NSA 5G, so a new option (Preferences > Logger Settings > Log Cells with Missing PLMN) will permit this.   Added option to display LTE info above 5G-NR info. Enabling this new option (Preferences > Display Settings > Show LTE Cells Above 5G-NR Cells) shows the same information that is currently displayed, but moves the LTE information above the 5G-NR information. Other changes: Code optimizations and enhancements. Improved Android 15 compatibility. Overhauled Purchases module. Resolved force closes impacting some GSM/LTE connections. Resolved issue with improper 5G-NR PLMN display when NR/LTE PLMNs did not match. Resolved issue with improper PLMN display with single-digit MNCs. Resolved issue with incorrect 5G-NR bands displayed on some devices due to Android bug. Resolved issue with incorrect number of neighbor cells displayed when some cells were unknown. Resolved issue with missing 5G-NR data when sector display is enabled. Resolved issue with saving 5G-NR site notes when NR/LTE PLMNs did not match. Resolved issue with settings to log missing GCI/NCI/TAC/PLMN being ignored. Resolved issues with web data export function. Updated internal libraries. Updated provider database. Updated target API to Android 15. I appreciate all of your support, and a big thank you to the members of the Beta Crew that help with testing and feedback!
    • Oct security update is out.
    • Stopped by again today and the antennas are up but it isn't live just yet. If other Sprint conversions are anything to go by it'll likely take about a month for the site to go live.
    • It is an Android bug that was reportedly fixed in August 2023 but definitely has not been. I have implemented numerous workarounds in SCP to correct the NR bands the app displays. The OS ignores the possibility that many NR-ARFCNs are valid across multiple bands.. it reports the lowest NR band that is valid for the current ARFCN. In your example, channel 432530 can be n1, n65, or n66.. so the OS just (lazily) reports n1.   Awesome, thanks! I will add an n65 override also.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...