Jump to content

Sprint 3xCA ?


Recommended Posts

I got that but, does that mean B41 is on a vzw tower? Weird seeing that in a metro area. It's also a Samsung Market where GCI are usually 09B.

 

Sent from my 2PQ93 using Tapatalk

Might be a small cell. But it says Sprint. Might also be clear conversion.

 

Sent from my LG-LS997 using Tapatalk

Link to comment
Share on other sites

Might be a small cell. But it says Sprint. Might also be clear conversion.

 

Sent from my LG-LS997 using Tapatalk

Could be a small cell. I'm my area Clearwire Sites are usually 02A.

 

Sent from my 2PQ93 using Tapatalk

Link to comment
Share on other sites

I got that but, does that mean B41 is on a vzw tower? Weird seeing that in a metro area. It's also a Samsung Market where GCI are usually 09B.

 

Sent from my 2PQ93 using Tapatalk

No. You can be connected to a Sprint B41 site three miles west and VZW on a separate site five miles east. They don't have to be on the same site. In this instance the two sites could be 8 miles apart.

 

When you couldn't find a Sprint 1x signal for voice, it did a scan for 1x roaming. It will then continue to still scan for Sprint LTE and will connect to it. Even if roaming on 1x. To roam on 1x and stay native on LTE does not require them to be on the same site.

 

Sent from my Nexus 6P using Tapatalk

  • Like 1
Link to comment
Share on other sites

No. You can be connected to a Sprint B41 site three miles west and VZW on a separate site five miles east. They don't have to be on the same site. In this instance the two sites could be 8 miles apart.

 

When you couldn't find a Sprint 1x signal for voice, it did a scan for 1x roaming. It will then continue to still scan for Sprint LTE and will connect to it. Even if roaming on 1x. To roam on 1x and stay native on LTE does not require them to be on the same site.

 

Sent from my Nexus 6P using Tapatalk

Ok. It's just little Weird cause it's a odd GCI for the Minnesota Market. B41 is usually 09B.

 

Sent from my 2PQ93 using Tapatalk

Link to comment
Share on other sites

Ok. It's just little Weird cause it's a odd GCI for the Minnesota Market. B41 is usually 09B.

 

Sent from my 2PQ93 using Tapatalk

 

Could be a Sprint in store LTE GCI

Link to comment
Share on other sites

  • 2 weeks later...

So I caved in and bought a Google Pixel even though my Nexus 5X is still totally 100% in great condition. The Pixel is 3xCA correct ? I was still playing around and aside from seeing if I am connected to Band 25,26, or 41, I cannot tell if it is 2x CA, or 3x CA

Link to comment
Share on other sites

So I caved in and bought a Google Pixel even though my Nexus 5X is still totally 100% in great condition. The Pixel is 3xCA correct ? I was still playing around and aside from seeing if I am connected to Band 25,26, or 41, I cannot tell if it is 2x CA, or 3x CA

I believe it is 3x CA capable, bit has not been enabled yet by Google.

 

Sent from my LG-LS997 using Tapatalk

  • Like 1
Link to comment
Share on other sites

So I caved in and bought a Google Pixel even though my Nexus 5X is still totally 100% in great condition. The Pixel is 3xCA correct ? I was still playing around and aside from seeing if I am connected to Band 25,26, or 41, I cannot tell if it is 2x CA, or 3x CA

I would ask @ingenium he would know more about it

 

Sent from my LG-LS997 using Tapatalk

  • Like 2
Link to comment
Share on other sites

I would ask @ingenium he would know more about it

 

Sent from my LG-LS997 using Tapatalk

The Pixel is 3xCA capable, but it has not been enabled yet for B41. I have seen 3xCA with it on AT&T though. There's a strong possibility 3xCA on Sprint will be enabled with the update that will be released on Monday.

 

Sent from my Pixel XL

  • Like 5
Link to comment
Share on other sites

The Pixel is 3xCA capable, but it has not been enabled yet for B41. I have seen 3xCA with it on AT&T though. There's a strong possibility 3xCA on Sprint will be enabled with the update that will be released on Monday.

 

Sent from my Pixel XL

 

 

Do you have a way to determine if the phone is just using Band 41 vs 2xCA ? I'm using signal check but it just shows the band connected. I rarely am ever connected to Band 26 here in Orange County, it's generally 25 or 41

Link to comment
Share on other sites

Do you have a way to determine if the phone is just using Band 41 vs 2xCA ? I'm using signal check but it just shows the band connected. I rarely am ever connected to Band 26 here in Orange County, it's generally 25 or 41

Check the engineering screen, or use Network Signal Guru if you have root (my preferred method). Keep in mind the phone will only engage CA during an active downstream session (ie a speed test or other download). The instant it finishes (say to do the upload portion of a speed test), it drops the second carrier.

 

Screenshots from NSG showing 2xCA on Sprint and 3xCA on AT&T:

 

e59288ba8fc32ea6f0eb808a9f9ddac7.jpg

 

422324a96e29c786bc805edf40d43a42.jpg

 

Sent from my Pixel XL

  • Like 2
Link to comment
Share on other sites

Check the engineering screen, 

 

Sent from my Pixel XL

 

 

 

Awesome. I tried the app, ran speedtest, then switched back to the app and it showed 2xCA briefly. Also it showed my DL speed at 56mps in LA County which is pretty incredible. For the longest time I'd only average 17mps down. Maybe Sprint has changed the area recently but I was very surprised to see that speed.

Edited by mikeprius
Link to comment
Share on other sites

Awesome. I tried the app, ran speedtest, then switched back to the app and it showed 2xCA briefly. Also it showed my DL speed at 56mps in LA County which is pretty incredible. For the longest time I'd only average 17mps down. Maybe Sprint has changed the area recently but I was very surprised to see that speed.

They may have added a small cell nearby to take some load, or maybe a Clearwire site was converted to a mini macro (adds another carrier, more capacity). So either network capacity increased, or perhaps you just did the test at a low usage time. My home site varies from 30 Mbps during the day with 2xCA to 80-100 at night. Averages in the 50-60 range. But at the same signal level but further away, I'm lucky to hit 10-15. Many variables, so when comparing tests it's important to do them in the exact same location.

 

Sent from my Pixel XL

  • Like 1
Link to comment
Share on other sites

They may have added a small cell nearby to take some load, or maybe a Clearwire site was converted to a mini macro (adds another carrier, more capacity). So either network capacity increased, or perhaps you just did the test at a low usage time. My home site varies from 30 Mbps during the day with 2xCA to 80-100 at night. Averages in the 50-60 range. But at the same signal level but further away, I'm lucky to hit 10-15. Many variables, so when comparing tests it's important to do them in the exact same location.

 

Sent from my Pixel XL

 

This is a separate issue, but I have a Nexus 6 as well and I have the MSL unlock code which allows me to play with the Bands. 

 

Currently it is enabled for 25,26,41. There's a Band 12 that is disabled. Would there be any benefit with Sprint to toggle that on as well ?

Link to comment
Share on other sites

This is a separate issue, but I have a Nexus 6 as well and I have the MSL unlock code which allows me to play with the Bands.

 

Currently it is enabled for 25,26,41. There's a Band 12 that is disabled. Would there be any benefit with Sprint to toggle that on as well ?

Only when on Roaming.

 

Sent from my 2PQ93 using Tapatalk

  • Like 2
Link to comment
Share on other sites

This is a separate issue, but I have a Nexus 6 as well and I have the MSL unlock code which allows me to play with the Bands.

 

Currently it is enabled for 25,26,41. There's a Band 12 that is disabled. Would there be any benefit with Sprint to toggle that on as well ?

I would. There is a large amount of Extended LTE (LTE roaming that comes out of your regular on network data allowance) as well as LTE Roaming (where usage comes out of your roaming allowance) that uses Band 12. I would also enable bands 2, 4 and 5 if your device supports them because they are also in use.

  • Like 2
Link to comment
Share on other sites

I would. There is a large amount of Extended LTE (LTE roaming that comes out of your regular on network data allowance) as well as LTE Roaming (where usage comes out of your roaming allowance) that uses Band 12. I would also enable bands 2, 4 and 5 if your device supports them because they are also in use.

 

With the Nexus 6, I can prioritize this. Do you have the Pixel by chance or Nexus device ? These phones support all bands and the MSL unlock is just a generic code. I wonder if I could turn on everything to increase my roaming signal. I have the Pixel as well

Link to comment
Share on other sites

typed *#*#3282#*#* and started screwing around with the menus and used the MSL unlock code to edit. Nothing is showing up. They probably don't want me messing with it lol

Link to comment
Share on other sites

It depends on where you live. I looked at Cali, and they have very small spots where you will be able to connect to LTE roaming. I think there may be a separate thread for more LTE Roaming info. 

  • Like 1
Link to comment
Share on other sites

@Tengen31 - Here's when I was driving back through Iowa when my phone claimed it was roaming on AT&T but it was actually roaming on US Cellular/Midwest Wireless.....extended network roaming. I ended up roaming for about 2 hours straight.

 

 

 

 

 

 

Only when on Roaming.

Sent from my 2PQ93 using Tapatalk

 

post-27270-0-94038700-1491834486_thumb.png

Link to comment
Share on other sites

@Tengen31 - Here's when I was driving back through Iowa when my phone claimed it was roaming on AT&T but it was actually roaming on US Cellular/Midwest Wireless.....extended network roaming. I ended up roaming for about 2 hours straight.

Yep that's a SCP error.

 

Sent from my SM-G900P using Tapatalk

Link to comment
Share on other sites

@Tengen31 - Here's when I was driving back through Iowa when my phone claimed it was roaming on AT&T but it was actually roaming on US Cellular/Midwest Wireless.....extended network roaming. I ended up roaming for about 2 hours straight.

What are the speeds like on roaming LTE? Take any tests?

Link to comment
Share on other sites

What are the speeds like on roaming LTE? Take any tests?

He LTE roamed onto Band 5 for this test.dee5761cf4a5e42a123f7eb4a8e717e7.jpg

 

Sent from my SM-G900P using Tapatalk

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...