Jump to content

How to Spot Clearwire TDD-LTE / Wimax Antennas & RRUs (Samsung)


lilotimz

Recommended Posts

Looks just like the panels vzw uses in most of michigan(excluding the old alltel areas) for evdo and 1x on 850. 

 

Could possibly be metro. I doubt its clearwire.

The panels I'm trying to ID are these:

HjvU6AX.jpg

 

 

I apologize for off topic.

Link to comment
Share on other sites

Saw another TD-LTE base station in Bellefontaine Neighbors, MO.

 

TD-LTE and WiMax base stations look the same.  They are not switching out the WiMax base cabinets.  They can LTE to them just fine.

 

Robert

Link to comment
Share on other sites

  • 2 weeks later...

Can I get an expert opinion on this Clearwire(maybe) site.

 

It is in Osseo, MN and about 1.5 weeks ago I spotted some workers up on what I believe is the Clearwire rack.

Can any of you experts help identify if these are the new Dual Mode rru's?

 

I apologize for the lack of detail in the pictures, my camcorder has an amazing zoom but doesn't take greatly detailed pictures.

 

I hope this works, I have never uploaded pictures before. :)

 

VYb2fzg.jpg

 

g2TlovT.jpg

 

 

zi53H2s.jpg

 

6VSFsEd.jpg

 

AvEvOfC.jpg

  • Like 1
Link to comment
Share on other sites

Can I get an expert opinion on this Clearwire(maybe) site.

 

It is in Osseo, MN and about 1.5 weeks ago I spotted some workers up on what I believe is the Clearwire rack.

Can any of you experts help identify if these are the new Dual Mode rru's?

 

I apologize for the lack of detail in the pictures, my camcorder has an amazing zoom but doesn't take greatly detailed pictures.

 

I hope this works, I have never uploaded pictures before. :)

 

 

 

Yep.

Link to comment
Share on other sites

Yep.

So to verify, you are saying that these are td-lte and wimax rtus. If so that is great because this site is really close to my work. I pull a - 76 dbm signal on wimax from this site at my desk.

 

Now bring on the triband phones since I am upgrade eligible. :-)

 

 

 

Sent from my SPH-D710 using Tapatalk 4

 

 

Link to comment
Share on other sites

So to verify, you are saying that these are td-lte and wimax rtus. If so that is great because this site is really close to my work. I pull a - 76 dbm signal on wimax from this site at my desk.

 

Now bring on the triband phones since I am upgrade eligible. :-)

 

 

 

Sent from my SPH-D710 using Tapatalk 4

 

Yep. You can not mistake the new Samsung dual mode TD-LTE RRUs unless they're in close proximity with Samsung network vision equipment.

  • Like 1
Link to comment
Share on other sites

Here is another site with the mysterious panel (on the right) and what appears to be ClearWire's 2.6Ghz band antenna. I'm guessing WiMax? 

 

 

Most likely. Interesting RF filter they have on that one. 

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 months later...

Goodby Huawei. Hello Samsung? http://imgur.com/a/XBJpw

 

Protection or co located site?

 

Where was this taken?  Those look like PCS only wide beam NV panels, and not Band 41 only panels.  I say that because Band 41 should only have one RRU per panel.  Whereas a Samsung high capacity site can have two panels per sector with two RRU's per panel.

 

Robert

Link to comment
Share on other sites

Where was this taken?  Those look like PCS only wide beam NV panels, and not Band 41 only panels.  I say that because Band 41 should only have one RRU per panel.  Whereas a Samsung high capacity site can have two panels per sector with two RRU's per panel.

 

Robert

 

I'm guessing it's a high capacity site, it has a very good vantage point  to a very large area.  It's not broadcasting Sprint PCS according to the site maps. When I lived in that area and took the pictures, my Sprint signal strength was bad enough to need an Airrave to hold calls.

 

https://www.google.com/maps?q=29.526259,-98.323048&num=1&t=h&z=19

Link to comment
Share on other sites

Where was this taken? Those look like PCS only wide beam NV panels, and not Band 41 only panels. I say that because Band 41 should only have one RRU per panel. Whereas a Samsung high capacity site can have two panels per sector with two RRU's per panel.

 

Robert

That's Clearwire with legacy Samsung Wimax rru. You can see it in some of the pics if you zoom in. It's a very thin rru.

 

Sent from my Nexus 5

 

 

Link to comment
Share on other sites

That's Clearwire with legacy Samsung Wimax rru. You can see it in some of the pics if you zoom in. It's a very thin rru.

 

Sent from my Nexus 5

That's why I wanted to know where it was at. So I could rule out it being a Samsung NV area.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

 

 

Link to comment
Share on other sites

I'm guessing it's a high capacity site, it has a very good vantage point  to a very large area.  It's not broadcasting Sprint PCS according to the site maps. When I lived in that area and took the pictures, my Sprint signal strength was bad enough to need an Airrave to hold calls.

 

https://www.google.com/maps?q=29.526259,-98.323048&num=1&t=h&z=19

TX is a samsung and Mot market.  Given it's a 4 ports radio unit, it should be Samsung updating it's RRU or some other reasons.  The replacement site has a longer antenna which means it's a PCS band antenna.

Link to comment
Share on other sites

  • 1 month later...
 
I live out in the country.  15 miles east of the nearest decent size city that has a population of about 37,000 (Richmond, Indiana).  I didn't think Sprint was adding Band 41 to rural areas that weren't densely populated.  However, last week I saw a rope hanging from CI33-----C050.  It was getting dark so I could not see the antennas very well.  Today, I took my new DSLR camera with me and the top image below is what I observed.  The antenna on the right has been there since July 2013.  The wider antenna on the left is new.
 
The bottom image is what it looked like in July 2013 after NV antenna was added, but before legacy was removed.
 
In addition, this week, I spoke to and verified a contractor for Time Warner has been running new fiber to the tower for Sprint.
 
So, am I correct in thinking this is new addition is a Band 41 antenna on this tower? (Band 25 & 26 run through the same antenna, and B41 requires an additional antenna, correct?)

 

CTgSHNb.jpg

 

v8tpSRU.jpg

  • Like 7
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • My S24 Ultra and my two S22s are uploading and working properly today, as another data point. 
    • My hope is they can spot something in the data that was exported. I am going after all 4 carriers on a multitude of phones and Android versions. My S24 did work.  I have not checked another S24 or S22.  S21s failed which are on Android 14 as well. It should be noted I did not reboot after updates and some of the data was captured on the prior update. Data from some new Boost Mobile Dish (Echostar) sites in the Wheeling area did make it in. Was hoping for more SA data from the duo. Many of the phones are just LTE.
    • I was traveling for a couple of days.   Sunday evening, I upload from 3 phones.  A S-22 and two Moto 5G phones.  Everything looked ok.    How do we explain that?   One person has issues and another person does not.  All my phones have the latest update.
    • Uploaded data without issues on Friday. Now with the latest update I am getting "Cluster #1 skipped: invalid file format detected. File exported for inspection." Doing same with all other clusters. Did this on 4 phones in a row.  Seems to work on s24 ultra just fine. On s21 ultra it says "web data upload failed. No data to send" although 8800 records were displayed. Now gives same error as above. I have not sent the data from 3 other phones.  All should have latest update.
    • After several months of testing, an update to SignalCheck Pro is rolling out on Google Play. It may take up to 48 hours to become available for download. Notable changes include: Added option to display site notes for NSA 5G-NR cells. Enabling this new option (Preferences > Display Settings > Show NSA 5G-NR Site Notes) will cause the app to make an "educated guess" as to what the most appropriate site note is linked to the connected NSA 5G cell, using the PCI and the device location. If it finds an existing entry that is likely to be relevant, it will display the note along with the distance from where the strongest signal from that cell was logged. While connected to NSA 5G, these notes cannot be edited; a valid NCI is required to add/edit notes and that information is not available on NSA connections.   Added option to log cells with missing/invalid PLMN (such as NSA 5G-NR cells). Users asked for the ability to log data for NSA 5G, so a new option (Preferences > Logger Settings > Log Cells with Missing PLMN) will permit this.   Added option to display LTE info above 5G-NR info. Enabling this new option (Preferences > Display Settings > Show LTE Cells Above 5G-NR Cells) shows the same information that is currently displayed, but moves the LTE information above the 5G-NR information. Other changes: Code optimizations and enhancements. Improved Android 15 compatibility. Overhauled Purchases module. Resolved force closes impacting some GSM/LTE connections. Resolved issue with improper 5G-NR PLMN display when NR/LTE PLMNs did not match. Resolved issue with improper PLMN display with single-digit MNCs. Resolved issue with incorrect 5G-NR bands displayed on some devices due to Android bug. Resolved issue with incorrect number of neighbor cells displayed when some cells were unknown. Resolved issue with missing 5G-NR data when sector display is enabled. Resolved issue with saving 5G-NR site notes when NR/LTE PLMNs did not match. Resolved issue with settings to log missing GCI/NCI/TAC/PLMN being ignored. Resolved issues with web data export function. Updated internal libraries. Updated provider database. Updated target API to Android 15. I appreciate all of your support, and a big thank you to the members of the Beta Crew that help with testing and feedback!
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...