Jump to content

COUNTDOWN!!! Nextel iDEN Shutdown


Recommended Posts

How can I tell if I am using 800 mhz? I have the signal check app but don't know what it all means.

 

Your 1x will be on BC 10 instead of BC 1 (or roaming on BC 0).

  • Like 1
Link to comment
Share on other sites

How can I tell if I am using 800 mhz? I have the signal check app but don't know what it all means.

Signal check will show 1X800 on the screen.  Unfortunately, you appear to be in utah.  The Utah SID is what Sprint is using to "hide" test 800Mhz signals nationwide.  Unless you are using a custom PRL to look at that SID, you won't see 800 until Sprint puts it in the stock PRL.

  • Like 1
Link to comment
Share on other sites

this is the test prl located in the sponsor section right?

Yes, there is one in the sponsor section and one in the premier sponsor section

Link to comment
Share on other sites

In memory...

 

"Please wait while the Nextel subscriber you are trying to reach is located..."

 

The antennalope had to leap and bound into just the right spot...

 

 

AJ

  • Like 1
Link to comment
Share on other sites

In memory...

 

"Please wait while the Nextel subscriber you are trying to reach is located..."

Just had a flashback of my Nextel BB..with its awesome retractable antenna! Yo! can you hear me!? hold on let me extend this flimsy ass antenna. 

  • Like 1
Link to comment
Share on other sites

I used to work for Motorola in Libertiville in the Cellular Sunscriber Sector.  I was curious about those antennas once and when I had some free time working when the phones weren't defecting off the line, I used a heat gun and melted down one and what did I find?? A coil of copper wire at the core..

Link to comment
Share on other sites

I used to work for Motorola in Libertiville in the Cellular Sunscriber Sector.  I was curious about those antennas once and when I had some free time working when the phones weren't defecting off the line, I used a heat gun and melted down one and what did I find?? A coil of copper wire at the core..

Akin to using wire hanger for broadcast television! Im sure id get at least -10dBm better reception with one of those glued to my HTC ONE internally.

Link to comment
Share on other sites

For LTE and CDMA? It's happening now.

I'm Sry, I should have specified. I understand it is currently being worked on but is there a general timeframe for the completion of the 800mhz lte Or is it just part of NV and will "mostly" done by the end of 2013?

Edited by Poopscoop2323
Link to comment
Share on other sites

I'm Sry, I should have specified. I understand it is currently being worked on but is there a general timeframe for the completion of the 800mhz lte Or is it just part of NV and will "mostly" done by the end of 2013?

The spectrum was "refarmed" the minute Sprint pulled the plug on Nextel at the end of June. Actually, in some markets it had been able to remove a few sites beforehand, since there weren't very many customers left on the network. They were able to remove some overlapping sites and transmit on fewer channels. So some places got a voice channel on 800 before Nextel even was shut down. Now that it's shut down, they will slowing start turning on 1xA and LTE on 800 and they go from site to site.

Link to comment
Share on other sites

I'm Sry, I should have specified. I understand it is currently being worked on but is there a general timeframe for the completion of the 800mhz lte Or is it just part of NV and will "mostly" done by the end of 2013?

800 LTE is sort of NV 2.0. It's beginning now, but probably won't be done until later next year. Although that is a bit of an unknown with SoftBank's investment. It much less work to get 800 LTE running than the current project for 1900 LTE, so it shouldn't take as long.

 

Sent from my HTC ONE

 

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • S23 and S24 (at least ultra versions) have 4xCA NR. I currently have n41+n41+n25+n71 most places I go.  I think select devices have 2xCA upload but I do not think it is in widespread use yet. CA is still mostly download focused.
    • If they use n41 + n41 2CA, people that are somewhat distant from the cell site will have an OK download but the upload will be a disaster.  Upload capability on b-41 was always a disaster on the old Sprint Network.   Now, with n25 + n41 combination, even the more distant users have a more decent upload.  I see n41 + n41 + n25 now with my S22 and I understand that we will see 4xCA with newer phones in the future.     I also see n41 + n41 + n71 sometimes too. Also some other combinations of 25, 41, 71.  I would think that eventually we will see AWS paired with n41 too.  What I am not sure of is ----  when I see 3xCA on my S22, I can see the 3 channels involved in the download but I am never sure just what I have on the upload. I do not think I have 3xCA on the upload.
    • I don't know enough about the nuts and bolts of NR to know the answer, but is there a reason they're not doing two overlapping 100 MHz n41 carriers and using selective resource shutoff to make each one 97 MHz?  Thus making use of the full 194 MHz instead of leaving 4 MHz unused as implied by the current standard 100+90 configuration? - Trip
    • Looks like another T-Mobile 5G bump happened over the past week and a half, maybe less: n41 carriers are now 90+100 MHz, up from 80+100 (which in turn is up from 40+100 back in early March). This is on top of the new n25 carrier recently. As part of this, it looks like T-Mobile is starting to prefer n25+n41 2CA even when pushing data, rather than having higher levels of CA that would hit higher peak speeds; at least indoors I need to force n41-only if I want to see the full 190 MHz there. To be fair the speeds are plenty quick with that amount of spectrum, and I'm sure they're load balancing, and my guess is this is a little better for battery life? With this expansion, they're now at 10x10+10x10 n25, 15x15 n71, 100+90 n41, for a total of 260 MHz (including FD uplink) of deployed NR here, up from 250 MHz a week ago, 230 MHz two weeks ago, and 190 MHz six months ago. VZW is at 140 MHz minus mmW, 170 if you count n2 DSS. AT&T is at 150 MHz (80+40 n77, 15x15 n5), 210 MHz I think if you count n2 and n66 DSS (guessing they're still running those). With this level of spectrum they should be able to continue offering home internet wherever. Guessing this is the last upgrade they can make before they need to throw new equipment on sites for C-Band. At this rate I figure that'll happen next year on a few dozen high-traffic sites.
    • https://www.lightreading.com/wireless/tds-telecom-to-launch-mobile-service-via-nctc-s-mvno Surprising given merger.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...