Jump to content

PRL 25013/51095 Changes


MacinJosh

Recommended Posts

I just activated my new galaxy victory on Ting, and it picked up PRL 24013. From digiblur's "Every Sprint PRL" post on xda, 24xxx is a "business acct" PRL. Would this be the normal Sprint 24013 PRL, or would they have a modified version?

Link to comment
Share on other sites

I'm on PRL 51095 here in Austin TX on my iphone5... but my phone switches between that and 31100 occasionally. My phone does not have a TX area code though. How does Sprint assign PRLs to subscribers? Is it phone number based, current geography based, or what?

Link to comment
Share on other sites

I'm on PRL 51095 here in Austin TX on my iphone5... but my phone switches between that and 31100 occasionally. My phone does not have a TX area code though. How does Sprint assign PRLs to subscribers? Is it phone number based, current geography based, or what?

 

By account type and device type. PRLs are national since people travel with their phones around the world.

 

I thought the iPhone 5 didn't use the 800 frequency. Or am I thinking about something else?

 

Confused.. Did you even read the thread?

 

Where can I view the channel? I look under status under settings and didn't see anything.

 

Also, Im relatively new to CDMA, are PRLs pushed automatically to everyone or is it a manually updated thing?

 

Both manual and automatic. Go into your debug screen under the 1x data.

 

Sent from my little Note2

 

 

Link to comment
Share on other sites

Confused.. Did you even read the thread?

 

I did and that's why I'm confused. I thought that the Network Vision update had some component when completed (the green sites) that the iPhone 5 couldn't support.

Link to comment
Share on other sites

Tried to update my prl 4 times but it's still on 55013. Anyone have the prl file so I can do it manually?

 

Sent from my SPH-L900 using Tapatalk 2

 

That's what you should be on for that device.

 

Sent from my little Note2

 

 

Link to comment
Share on other sites

Oh. I thought there was a new prl update after reading this thread. My mistake. Sorry about that!

 

Sent from my SPH-L900 using Tapatalk 2

 

That is the new one. 55xxx is on the Note2 since it has international capabilities. Pretty close to 25xxx now.

 

Sent from my little Note2

 

 

Link to comment
Share on other sites

Where can I view the channel? I look under status under settings and didn't see anything.

 

Also, Im relatively new to CDMA, are PRLs pushed automatically to everyone or is it a manually updated thing?

 

Enter "##debug#" in your phone dialer. Then enter "777468" for the lock code. The check out the 1x Engineering RF screen

Link to comment
Share on other sites

I did and that's why I'm confused. I thought that the Network Vision update had some component when completed (the green sites) that the iPhone 5 couldn't support.

 

The only thing the iPhone doesn't support is SVDO & SVLTE. Otherwise it supports CDMA/EVDO 800 & 1900, & LTE 1900, plus CDMA/EVDO on 850, and is a world roaming capable phone.

  • Like 1
Link to comment
Share on other sites

The only thing the iPhone doesn't support is SVDO & SVLTE. Otherwise it supports CDMA/EVDO 800 & 1900, & LTE 1900, plus CDMA/EVDO on 850, and is a world roaming capable phone.

 

I believe it's 800 SMR support was only certified with the FCC for CDMA 1X, not LTE. As far as I understand its radio, there is no hardware limitation for this as it can transmit/receive any of the supported technologies on any of the supported bands, but it would require a software update to enable.

 

So YMMV, but after iDEN shuts down next year we may see Apple enable LTE on SMR or they may not. No one knows, but there's a much higher chance than most manufacturers given Apple's track record of updating older devices.

Link to comment
Share on other sites

 

I believe it's 800 SMR support was only certified with the FCC for CDMA 1X, not LTE. As far as I understand its radio, there is no hardware limitation for this as it can transmit/receive any of the supported technologies on any of the supported bands, but it would require a software update to enable.

 

So YMMV, but after iDEN shuts down next year we may see Apple enable LTE on SMR or they may not. No one knows, but there's a much higher chance than most manufacturers given Apple's track record of updating older devices.

 

I would rather that Apple make the iPhone 5S compatible with 800 LTE and SVLTE capable. Granted, I'm not missing the feature, but it would be nice to have.

 

 

Sent from Josh's iPhone 5 using Tapatalk

Link to comment
Share on other sites

When did this change? I keep hearing from people and material that June 30th 2013 is the date.

 

Sent from my little Note2

"On or around", yes. Nothing about that has changed, save for charging Nextel customers more (which, if I remember correctly, they're gonna be up to $20 extra per line some time next month).

Link to comment
Share on other sites

I was traveling down I75 yesterday and my phone had just taken the 25013 update. As I was going through Cleveland TN around the 25th street exit I noticed I was roaming for a few moments and had 4G dispayed while I was roaming. I opened not roam control to see what network I was on and it said Verizon. Also for the first time I saw the roaming triangle notification turn to a very small R. Has anyone else picked up Verizon 4G while roaming or noticed the letter R indtead of the triangle on a Samsung Galaxy S3?

 

Sent from my SPH-L710 using Tapatalk 2

 

 

Link to comment
Share on other sites

Has anyone else picked up Verizon 4G while roaming or noticed the letter R indtead of the triangle on a Samsung Galaxy S3?

 

Your Sprint variant Galaxy S3 is incompatible with VZW LTE. So, you experienced Sprint LTE while roaming on VZW CDMA1X. This is nothing new -- it happens occasionally.

 

AJ

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...