Jump to content

Network Vision/LTE - Orange County Market (Anaheim/Santa Ana/Irvine/Huntington Beach)


mbaseball3

Recommended Posts

I’m new to this, so excuse the question, but are you saying if I start mapping with Sensorly everyday to and from work I should see LTE possibly be activated sooner in my area? Near the Main Place Mall in Santa Ana, next to the Discovery Science Center or known as the Cube.

 

No- what I am saying is that if you start the continuous mapping or testing part of sensorly and just drive to and from work, you will be mapping all the spots for LTE as you get to work. You will be mapping it for everyone to see where LTE coverage is. I suppose it might be activated sooner as Sprint may see the activity and want to react towards it, who knows. But you would mostly be doing everyone a favor by mapping the LTE coverage on the sensorly maps.

Link to comment
Share on other sites

No- what I am saying is that if you start the continuous mapping or testing part of sensorly and just drive to and from work, you will be mapping all the spots for LTE as you get to work. You will be mapping it for everyone to see where LTE coverage is. I suppose it might be activated sooner as Sprint may see the activity and want to react towards it, who knows. But you would mostly be doing everyone a favor by mapping the LTE coverage on the sensorly maps.

 

If you have an iPhone like myself we cant do it. We have to use rootmetrics which is kinda a joke

Link to comment
Share on other sites

I’m new to this, so excuse the question, but are you saying if I start mapping with Sensorly everyday to and from work I should see LTE possibly be activated sooner in my area? Near the Main Place Mall in Santa Ana, next to the Discovery Science Center or known as the Cube.

 

Nope, Sensorly detects your signal either 3G or 4G and maps it in their servers. This way if you would like to see where is 3G/4G Sprint coverage or any other carrier you can check on their maps. sensorly.com

 

Using sensorly will not prompt spring to activate LTE in areas.

 

Also, the sensorly is only available on android phones.

Link to comment
Share on other sites

Nope, Sensorly detects your signal either 3G or 4G and maps it in their servers. This way if you would like to see where is 3G/4G Sprint coverage or any other carrier you can check on their maps. sensorly.com

 

Using sensorly will not prompt spring to activate LTE in areas.

 

Also, the sensorly is only available on android phones.

 

Got it, thanks for the info. Question about mapping during my commute, should I leave the WIFI on? I see that Sensorly adds points or something like that for WIFI, 2G-3G and 4G LTE when mapping. I’m not sure if the phone picks up WIFI that will override or take precedence over 3G or 4G LTE readings?

Link to comment
Share on other sites

Got it, thanks for the info. Question about mapping during my commute, should I leave the WIFI on? I see that Sensorly adds points or something like that for WIFI, 2G-3G and 4G LTE when mapping. I’m not sure if the phone picks up WIFI that will override or take precedence over 3G or 4G LTE readings?

 

if you want to map wifi, thats up to you. that option just allows you to map where free wifi is at. we are just curious where to find the 4G's. basically just open app, select map trip, start, and commute. stop it when you park. simple. even a cave man can do it :lol:

Link to comment
Share on other sites

if you want to map wifi, thats up to you. that option just allows you to map where free wifi is at. we are just curious where to find the 4G's. basically just open app, select map trip, start, and commute. stop it when you park. simple. even a cave man can do it :lol:

 

Simple indeed! Not sure if the Neanderthals could do it though, they would probably try eating the nice looking GS3 or pound it to destruction J.

Link to comment
Share on other sites

My buddy is mapping LTE around Angel Stadium and Disneyland. Looks like at least one tower in that area went live.

 

I'll be at the Angels game tonight. I hope that signal penetrates inside the stadium as well.

 

And wish me luck I come home alive. Doyer fans (aka Raiders fans) will be invading the OC.

 

Sent from my SPH-L900 using Tapatalk 2

 

 

  • Like 2
Link to comment
Share on other sites

My buddy is mapping LTE around Angel Stadium and Disneyland. Looks like at least one tower in that area went live.

 

I'll be at the Angels game tonight. I hope that signal penetrates inside the stadium as well.

 

And wish me luck I come home alive. Doyer fans (aka Raiders fans) will be invading the OC.

 

Sent from my SPH-L900 using Tapatalk 2

 

I'll be there too. Go Dodgers : )

Link to comment
Share on other sites

My buddy is mapping LTE around Angel Stadium and Disneyland. Looks like at least one tower in that area went live.

 

I'll be at the Angels game tonight. I hope that signal penetrates inside the stadium as well.

 

And wish me luck I come home alive. Doyer fans (aka Raiders fans) will be invading the OC.

 

Sent from my SPH-L900 using Tapatalk 2

 

LOL.. Touché

Edited by desmonda7
Link to comment
Share on other sites

My buddy is mapping LTE around Angel Stadium and Disneyland. Looks like at least one tower in that area went live.

 

I'll be at the Angels game tonight. I hope that signal penetrates inside the stadium as well.

 

And wish me luck I come home alive. Doyer fans (aka Raiders fans) will be invading the OC.

 

Sent from my SPH-L900 using Tapatalk 2

 

I was right there last night with no LTE but over 1.5mps 3G. Hopefully it went live today.

Link to comment
Share on other sites

Got LTE inside the Big A, but can't map Sensorly.

 

Sent from my SPH-L900 using Tapatalk 2

 

I mapped the stadium today, and some areas around it.

 

 

Ladera Ranch LTE signal is live and strong! Hope everyone is mapping today!

 

I also mapped a bunch of. Ladera today as well as some of the 5.

  • Like 1
Link to comment
Share on other sites

The tower at Tustin/ La Palma (near the Lakeview site) was spitting out LTE today. I noticed it earlier in the day and drove around the block a few times. I then mapped it on the train ride home . It's forsure not the Lakeview one. I drove around and checked the BSID to make sure. I hope this one stay turned on.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
    • So how does this whole direct to satellite thing fit in with the way it works now? Carriers spend billions for licenses for specific areas. So now T-Mobile can offer service direct to customers without having a Terrestrial license first?
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...