Jump to content

Network Vision/LTE - Atlanta/Athens Market


frank04

Recommended Posts

I find that Sensorly does not work with the screen off. That is what it said due to Android OS.

 

Keep your phone plugged in and charging as Sensorly loves to eat your battery for lunch.

Link to comment
Share on other sites

 

Keep your phone plugged in and charging as Sensorly loves to eat your battery for lunch.

 

You can set Sensorly only to be allowed to use a certain percentage of your battery. But if you want to use it continuously, definitely need to keep it plugged in.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

Link to comment
Share on other sites

Hey, I am on my 2nd day with the updated OTA and I think the LTE tolerence problem has been fixed.

 

Here is my uneducated free public school education says and here is why:

 

I am trying to help Sensory here map new LTE signal n when I go running every morning and when I am near the bounds of the purple color, sure enough my LTE indicator flicker with the strenght bar decresing and it go back to 3G.

 

Then when I come back to the LTE area again doing 4 miles of big circle, sure enough the LTE signal comes back on again right where Sensory was map by someone with the LTE.

 

Robert I think you want take me for a spanking back out in the woods and yes it is frustrating to see a LTE tower few feet from me and not able to get any LTE without toggling airplane or reboot the phone. That was before.

 

I hope everything is getting better for everyone and your pursuit of LTE signal.

Link to comment
Share on other sites

Does anyone know the LTE tower at the Atlanta airport? Especially at the northern part of it?

 

I see purple circle all around the airport on Sensory, but dont know why the LTE signal would go in and out at the northern end.

 

I been using Sensory to map the LTE signal whenever I can. :-)

Link to comment
Share on other sites

I live 1.25 miles from a tower that is now live with 4G (in cumming). I can only get 4G when I am within .25 miles of the tower. This is on an Evo LTE, with the latest OTA update installed. Is a quarter mile the expected footprint of an LTE tower??

 

I have been running sensorly, which is how I found this tower...you can see on sensorly.com the absurdly small area around the tower that gives LTE connection. (Tower is the red dot).

 

tower.jpg

 

 

 

Speeds are good when I get close to the tower. This test is when I am parked directly under it.

 

cap.JPG

 

 

 

There is another tower about 1 mile from this one...I havent been able to find out exactly where this tower is, but its coverage is also about .25 miles:

 

 

tower2.JPG

 

 

 

I hope these towers are still in test mode, and will increase their range at some point in the future...neither show up on the s4gru "Sites completed" map, so I have my fingers crossed.

Link to comment
Share on other sites

I live 1.25 miles from a tower that is now live with 4G (in cumming). I can only get 4G when I am within .25 miles of the tower. This is on an Evo LTE, with the latest OTA update installed. Is a quarter mile the expected footprint of an LTE tower??

 

I have been running sensorly, which is how I found this tower...you can see on sensorly.com the absurdly small area around the tower that gives LTE connection. (Tower is the red dot).

 

Speeds are good when I get close to the tower. This test is when I am parked directly under it.

 

There is another tower about 1 mile from this one...I havent been able to find out exactly where this tower is, but its coverage is also about .25 miles:

 

I hope these towers are still in test mode, and will increase their range at some point in the future...neither show up on the s4gru "Sites completed" map, so I have my fingers crossed.

 

It's possible you are not connected to the site you think you are. How do you figure which site you are connected to? The bars in your signal strength indicator does not show your LTE signal strength, ever. It only shows your 1x signal strength. We discuss that in this topic here: http://s4gru.com/ind...ignal-strength/

 

You may just be at spots that have line of sight to a more distant tower that the one you are parked near. This could especially be true if you are in a hilly area and near the top of a hill. The next time you are in one of these spots, go check your actual LTE signal strength (as described in the link above) by going into the LTE Engineering screen. This will help us to determine if you are connected to the tower above you, or one further away.

 

One quarter mile is not a typical distance, except in a very dense urban deployment with lots of adjacent sites.

 

Robert

Link to comment
Share on other sites

I have never been this close to a cell tower before.

Was at Jackson EMC in Jefferson, GA. Did not have any 4G signal so I assume none of those nodes or whatever are on this tower.

hy8u7e2e.jpg

Mav.

 

Sent from my Galaxy Nexus w/Jelly Bean.

Edited by VW Maverick
Link to comment
Share on other sites

It's possible you are not connected to the site you think you are. How do you figure which site you are connected to? The bars in your signal strength indicator does not show your LTE signal strength, ever. It only shows your 1x signal strength. We discuss that in this topic here: http://s4gru.com/ind...ignal-strength/

 

You may just be at spots that have line of sight to a more distant tower that the one you are parked near. This could especially be true if you are in a hilly area and near the top of a hill. The next time you are in one of these spots, go check your actual LTE signal strength (as described in the link above) by going into the LTE Engineering screen. This will help us to determine if you are connected to the tower above you, or one further away.

 

One quarter mile is not a typical distance, except in a very dense urban deployment with lots of adjacent sites.

 

Robert

 

Thanks for the info.

 

I assume that I was connecting to the tower I was parked under, because anywhere else I dont get 4G.

 

The other thing that concerns me is that to get the LTE signal to connect, I am still having to go into Mobile Settings and cycle between "CDMA" and "CDMA/LTE". Even when parked right under the tower, I have to cycle this setting. I tested this by driving around near the tower last night. I had hoped the latest OTA update for the Evo LTE would have fixed this issue.

 

I will use the ##DEBUG# code to do a bit more testing.

Link to comment
Share on other sites

I know I had been beaching about this before, after my OTA update, my LTE problem is gone.

 

It has been 6 days since I did any phone power/off and when I come back to my home or near my LTE tower, my LTE comes on.

 

I would say a LTE range around my house is about 1.5 miles radius.

 

If you are close to a LTE tower, your dbm should be in that great range. This is very true. See that post Robert mention.

Link to comment
Share on other sites

Thanks for the info.

 

I assume that I was connecting to the tower I was parked under, because anywhere else I dont get 4G.

 

The other thing that concerns me is that to get the LTE signal to connect, I am still having to go into Mobile Settings and cycle between "CDMA" and "CDMA/LTE". Even when parked right under the tower, I have to cycle this setting. I tested this by driving around near the tower last night. I had hoped the latest OTA update for the Evo LTE would have fixed this issue.

 

I will use the ##DEBUG# code to do a bit more testing.

 

You need to check and see what your dbm's are. My lte signal(on my evo lte) tends to drop off at around -107 or so. Most times it will connect if I toggle but it drops back off soon after. Once my signal comes back to at least -107, the phone reconnects by itself just fine.

Link to comment
Share on other sites

I feel like Sprint is singling me out and laughing at me for fun lol, check out my situation and try to understand why I'm so frustrated.

 

Sensorly map

2012-09-21%2016.43.46.png

 

Tower location

distance.png

 

Tower

tower.png

 

 

Why oh why no LTE @ home for me!!?? I got blazing speeds on my OG Epic w/wimax hope they get this one working by Christmas.

Link to comment
Share on other sites

You need to check and see what your dbm's are. My lte signal(on my evo lte) tends to drop off at around -107 or so. Most times it will connect if I toggle but it drops back off soon after. Once my signal comes back to at least -107, the phone reconnects by itself just fine.

 

If you are in good range, you still have to toggle sometimes?

 

Does changing PRL make things better for LTE?

Link to comment
Share on other sites

If you are in good range, you still have to toggle sometimes?

 

Does changing PRL make things better for LTE?

 

Oh no, when I have good signal I don't have to toggle at all, only if my signal drops below a certain point then I would have to toggle but that doesn't last long since the phone has an issue with holding on to a weaker lte signal.

Link to comment
Share on other sites

I feel like Sprint is singling me out and laughing at me for fun lol, check out my situation and try to understand why I'm so frustrated.

 

Sensorly map

2012-09-21%2016.43.46.png

 

Tower location

distance.png

 

Tower

tower.png

 

 

Why oh why no LTE @ home for me!!?? I got blazing speeds on my OG Epic w/wimax hope they get this one working by Christmas.

 

That is me who mapped that stuff up I-85 and around I-285 toward Dekalb County. I am not sure it is blank right there. Give me a few more days of driving to work and we will know for sure.

 

The problem I am running into on my S3 is that I stream Pandora and SiriusXM on my phone going to work. What happens is that if it sees a 4g signal before I start streaming it will keep it, but once a 3g signal happens on my phone while streaming, it very rarely switches back to 4g on its own while I am streaming. I tend to have to toggle mobile data off and on. If I am not streaming or doing anything with the data it switches back and forth more regularly. Maybe this new OTA for the S3 will fix some of this switching back and forth stuff.

 

Funny, my grandparents live right off Old Bill Cook Rd by that fire station and tower.

 

 

Sent from my SPH-L710 using Tapatalk 2

Link to comment
Share on other sites

Don't take all the credit. I drive around that area as well.

 

Well all I know is that Sensorly had nothing down I-85 and southern arc of I-285, I run it one day to and from work and the map is updated with LTE on it now.

 

Sent from my SPH-L710 using Tapatalk 2

Link to comment
Share on other sites

 

Sensorly map

2012-09-21%2016.43.46.png

 

I have checked and checked here and there is a gap in coverage, but it is down in a low part of the interstate which is why it probably doesn't get good LTE coverage in that one spot.

 

Sent from my SPH-L710 using Tapatalk 2

Link to comment
Share on other sites

I have checked and checked here and there is a gap in coverage, but it is down in a low part of the interstate which is why it probably doesn't get good LTE coverage in that one spot.

 

Sent from my SPH-L710 using Tapatalk 2

 

Fortunately there is a Sprint site in that gap that will get LTE coverage in the not too distant future to help with a signal in that hollow.

 

Robert

  • Like 1
Link to comment
Share on other sites

I map my subdivision, little of Mt Zion, half of Upper Riverdale and part of Roy Huey.

 

Really, nobody use this app and nobody have LTE phone in my area?

 

Forgot this is not Silicon Valley.

 

I frequent that area all the time but I been out of town for the last few weeks on my usual business travels and won't be back until next saturday. When I get back I will look at the map and try to map areas that aren't showing up yet.

Link to comment
Share on other sites

I frequent that area all the time but I been out of town for the last few weeks on my usual business travels and won't be back until next saturday. When I get back I will look at the map and try to map areas that aren't showing up yet.

 

Its not just Sprint user. ATT and Verizon for LTE, they dont have much mapping except on the highway also.

 

Sorry to come into conclusioin too fast for Sprint. :o

Link to comment
Share on other sites

Its not just Sprint user. ATT and Verizon for LTE, they dont have much mapping except on the highway also.

 

Sorry to come into conclusioin too fast for Sprint. :o

 

Realistically how many regular people are gonna use an app like sensorly anyway? Apps like this will only be used by a small fraction of us "enthusiast" which in itself is a small fraction of the total number of customers.

  • Like 2
Link to comment
Share on other sites

 

Realistically how many regular people are gonna use an app like sensorly anyway? Apps like this will only be used by a small fraction of us "enthusiast" which in itself is a small fraction of the total number of customers.

 

This is true. Additionally, since other carriers have caps, many people are afraid to use services like Sensorly and RootMetrics. So Sprint usually has more of a showing on these sites, all things considered.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • On Reddit, someone asked (skeptically) if the US Cellular buyout would result in better service.  I'd been pondering this very issue, and decided to cross-post my response here: I've been pondering the question in the title and I've come to the conclusion that the answer is that it's possible. Hear me out. Unlike some of the small carriers that work exclusively with one larger carrier, all three major carriers roam on US Cellular today in at least some areas, so far as I know. If that network ceases to exist, then the carriers would presumably want to recover those areas of lost service by building out natively. Thus, people in those areas who may only have service from US Cellular or from US Cellular and one other may gain competition from other carriers backfilling that loss. How likely is it? I'm not sure. But it's definitely feasible. Most notably, AT&T did their big roaming deal with US Cellular in support of FirstNet in places where they lacked native coverage. They can't just lose a huge chunk of coverage whole still making FirstNet happy; I suspect they'll have to build out and recover at least some of that area, if not most of it. So it'd be indirect, but I could imagine it. - Trip
    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...