Jump to content

Is a tower that connects eHRPD already upgraded?


Recommended Posts

To quote Robert from another topic,

Sprint installs eHRPD as a software upgrade over the EVDO network in an area before LTE is deployed. It must be complete on each LTE site and every site surrounding a live LTE site, to allow for the proper handoff between EVDO and LTE.

 

So Sprint typically is upgrading all the sites to eHRPD well in advance of LTE deployment. Every market that has active NV deployment already has eHRPD largely deployed. And some even that will not get LTE until 2013 are already reporting some eHRPD, most likely caused by which LTE core they are connected to coming live.

 

eHRPD is EVDO that runs through the LTE core, so it can maintain one IP address as it handsoff between LTE and 3G. It is possible that eHRPD will be faster at times, if the LTE core is less busy than the EVDO data switch. But when using the same backhaul, EVDO and eHRPD should be similar speeds.

 

So connecting to eHRPD doesn't necessarily mean anything about the tower to which you are connecting.

  • Like 1
Link to comment
Share on other sites

Interesting then that the Boston area is getting LTE towers going live, but I still haven't seen any eHRPD connections anywhere in Massachusetts. Only time i've gotten an eHRPD signal is in the Baltimore airport.

  • Like 1
Link to comment
Share on other sites

Interesting then that the Boston area is getting LTE towers going live' date=' but I still haven't seen any eHRPD connections anywhere in Massachusetts. Only time i've gotten an eHRPD signal is in the Baltimore airport.[/quote']

 

But now that Sprint is actively blocking LTE connections, eHRPD availability is less important. It will need to be up on every site and every site adjacent to any unblocked LTE site in order for the handoffs to occur as designed.

 

In cases where Sprint does not have eHRPD ready to be used around completed LTE sites, I expect them to continue blocking access to that LTE site...even on launched markets.

 

Robert via Kindle Fire using Forum Runner

Link to comment
Share on other sites

I live on the CT/MA border does that mean they should set my tower(CT) up for eHRPD so i can switch to LTE when you go into MA.

 

That's a good question. You would think so. I'm not sure how they will handle market boundaries. My guess is if the CT site is on the same exact 4G core as the site across the border in MA, then I believe they will.

 

Robert via Kindle Fire using Forum Runner

Link to comment
Share on other sites

how far in advanced do they do eHRPD and what is it software/hardware. like ahecht said it's not in the Boston market yet i keep checking.

 

There is no definite timelines in advance that eHRPD gets operational in advance of LTE. I just don't think they will allow LTE sites to go live without eHRPD live around it. Especially since LTE will start out as islands. They want customers to be able to Anne off seamlessly between 3G and LTE.

 

Robert via Kindle Fire using Forum Runner

Link to comment
Share on other sites

I have visited a couple of the MA LTE sites and have not found either LTE or ehrpd.

 

Sent from my EVO using Tapatalk 2

 

What are you using to try to connect to LTE or eHRPD? The E4GT is not capable of either connection...

  • Like 1
Link to comment
Share on other sites

What are you using to detect eHRPD vs CDMA? Thanks.

 

The Netmonitor app on Android works pretty well; you can also look under Settings -> About phone -> Network (at least on the Evo 4G LTE, although I think that's the standard place on all ICS phones).

Link to comment
Share on other sites

My EVO LTE :P

 

Sent from my EVO using Tapatalk 2

 

He assumed you still have a E4GT, because that is what is listed in your profile. You should update your device when you get a chance.

 

Robert

Link to comment
Share on other sites

He assumed you still have a E4GT, because that is what is listed in your profile. You should update your device when you get a chance.

 

Robert

 

I Finally just now changed mine :D

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...
The app is called "network signal info" by kaibits software.

 

Yeah, another of the class of apps that I don't like for privacy reasons, even the so-called "Pro" version. I realize that some people don't share my opinion, but I won't install such an app and widget.

Link to comment
Share on other sites

 

Yeah, another of the class of apps that I don't like for privacy reasons, even the so-called "Pro" version. I realize that some people don't share my opinion, but I won't install such an app and widget.

May I ask what's wrong with the app?

 

Sent From EVO LTE

Link to comment
Share on other sites

 

Yeah, another of the class of apps that I don't like for privacy reasons, even the so-called "Pro" version. I realize that some people don't share my opinion, but I won't install such an app and widget.

 

Yep..nice looking app but horrible permissions.

 

Sent from my C64 w/Epyx FastLoad cartridge

Link to comment
Share on other sites

May I ask what's wrong with the app?

 

Installing the app grants it permissions that could enable reading your phone number and those you connect to, as well as your location, and report them somewhere via an Internet connection over which you have no control. And if the widget is installed, then it runs full time as a service. I choose not to do that, although it is increasingly common as a business model to barter one's private details in exchange for the use of a "free" app. But even the paid "Pro" version has all those permissions.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Was in Red Hook again and I swear there are more Link5G sites as there are Verizon, T-Mobile, and AT&T small cells combined in the entire neighborhood. It seemed like every other street I turned down had one installed. Hopefully carriers will start hopping on them soon. Seems like a lot of effort to go through for no one to use them.  — — — — — T-Mobile converted the Sprint site on top of NYU Langone Brooklyn in Sunset Park. I first mapped one sector of it back in November 2023 but I thought it was a small cell so I never pinned it but I ran into another sector today which caught me off guard. I'm unable to find a permit for the conversion so it's definitely a surprise. There's another T-Mobile site 1 block away that T-Mobile initially installed back in 2019 so I'm kinda surprised they're keeping both considering the Sprint conversion is on a much taller building and could potentially provide much better coverage to the entire area.  — — — — — The old permit expired for this site without any work being done but a new permit was just approved a few days ago for a T-Mobile site at this address. Description mentions 3 antennas with 2 RRUs per sector. My guess is they're doing something similar to what they did at 360 Furman St in Brooklyn where they broadcast Band 2/66 and n25/41 from one antenna. It's a bit of a downgrade considering the site it's replacing was a full build with Ericsson 6449s. 
    • Still not seeing any ULS postings for pending T-Mobile UScellular merger in Dane county Wisconsin.
    • Came across another Crown Castle Solutions multi-tenant oDAS node in Brooklyn. Located at 40.7002286, -73.9612666. Nothing on T-Mobile or AT&T so I'm assuming these are all Verizon nodes that Crown Castle is anticipating another carrier will hop on down the line.
    • Same with factory unlocked
    • June security update is out (S22U TMO)
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...