Jump to content

Network Vision/LTE - Jacksonville Market (including Gainesville/St. Augustine/Ocala)


Syph3r

Recommended Posts

Since yesterday I have been experiencing dropped data/calls in different locations around town (home and work) and thought it was just my phone acting up. However, I confirmed with a few other friends around town that they have been experiencing the same issues. Is this the beginning of the NV upgrade in Jacksonville?

  • Like 1
Link to comment
Share on other sites

I doubt it my voice service was down near my home for a couple days and I had an outage according to sprint the problem is fixed now.

Btw I'm in Jacksonville too.

Edited by tybo31316
Link to comment
Share on other sites

Network Vision is just about to begin in the Jacksonville market. Subcontractors are mobilizing. But I would be surprised if they are doing anything right now that could lead to service disruption.

 

Robert via Kindle Fire using Forum Runner

Link to comment
Share on other sites

What is really weird is if I put my EVO in "CDMA/LTE" my data connection bounces from 1X to no data at all and I lose (EVDO) 3G altogether. However, if I put the Network Mode in "CDMA Only" 3G comes back and everything's normal. Until Monday, I have always had it in CDMA/LTE mode with no issues, why now???

Link to comment
Share on other sites

What is possible is that eHRPD upgrades could be happening in the market now. Have you ever had a confirmed eHRPD connection before?

 

Robert via Kindle Fire using Forum Runner

Link to comment
Share on other sites

All is back to normal. Back on CDMA/LTE mode with solid 3G signal.

Do you get good 3G speeds in Jacksonville just about everywhere or does it suck pretty much everywhere just like the Majority of the Country
Link to comment
Share on other sites

I average probably 0.40Mbps. It just depends on the location, some places I get over 1Mbps easy, others 0.03Mbps (mostly at like malls and movie theaters where the load on the towers is extremely heavy)

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

What side of town were you on when you connected to ehrpd? Do you leave your phone on LTE/CDMA mode? Also does it cause any significant battery drain if left on? I leave my phone on cdma mode only because I knew it would be a while before I saw any lte.

Link to comment
Share on other sites

What side of town were you on when you connected to ehrpd? Do you leave your phone on LTE/CDMA mode? Also does it cause any significant battery drain if left on? I leave my phone on cdma mode only because I knew it would be a while before I saw any lte.

Leaving it on LTE/CDMA hasn't made any noticeable impact on battery life. I'm sure it uses a little bit more, but like I said, my phone activity varies so it's nearly impossible to know 100% the impact it has. I'm in zip code 32259 btw.

 

You'll only find eHRPD if you're on LTE/CDMA, otherwise you'll only find EvDo RevA.

Link to comment
Share on other sites

Thanks man I always leave my phone on cdma only because of my old WiMAX phones searching all day but I know the new LTE phones are better at scanning and uses less battery. I'm still paranoid from the past. I need all the battery life I can get. I'll run my phone in LTE/cdma and see what I can find around town.

  • Like 1
Link to comment
Share on other sites

Thanks man I always leave my phone on cdma only because of my old WiMAX phones searching all day but I know the new LTE phones are better at scanning and uses less battery. I'm still paranoid from the past. I need all the battery life I can get. I'll run my phone in LTE/cdma and see what I can find around town.

Let me know what you find!

Link to comment
Share on other sites

So to see that do you randomly happen to look at your connection screen while connected?

 

Sent from my EVO using Tapatalk 2

I turned on lte/cmda and went into settings > status and it states what mobile network you're connected to. My house has Ehrpd now, too. Jacksonville about to get busy!
  • Like 1
Link to comment
Share on other sites

So does it stay like that until roll out? And you have seen any tower work in your area?

 

Sent from my EVO using Tapatalk 2

I've noticed fiber optics being installed at some Jax sites but I haven't seen any lte panels installed yet.
Link to comment
Share on other sites

I've noticed on my EVO LTE my data connection doesn't go to 1x or no connection when in a low signal area when connected to eHRPD vs cdma only mode. The data problems were starting to get aggravating. So I guess I'll leave my phone on LTE/cdma for the time being.

Link to comment
Share on other sites

I've noticed on my EVO LTE my data connection doesn't go to 1x or no connection when in a low signal area when connected to eHRPD vs cdma only mode. The data problems were starting to get aggravating. So I guess I'll leave my phone on LTE/cdma for the time being.

 

Its still the same exact signal as before unless of course the tower was changed over to NV.

 

Sent from my C64 w/Epyx FastLoad cartridge

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Historically, T-Mobile has been the only carrier contracting with Crown Castle Solutions, at least in Brooklyn. I did a quick count of the ~35 nodes currently marked as "installed" and everything mapped appears to be T-Mobile. However, they have a macro sector pointed directly at this site and seem to continue relying on the older-style DAS nodes. Additionally, there's another Crown Castle Solutions node approved for construction just around the corner, well within range of their macro. I wouldn’t be surprised to see Verizon using a new vendor for their mmWave build, especially since the macro site directly behind this node lacks mmWave/CBRS deployment (limited to LTE plus C-Band). However, opting for a multi-carrier solution here seems unlikely unless another carrier has actually joined the build. This node is equidistant (about five blocks) between two AT&T macro sites, and there are no oDAS nodes deployed nearby. Although I'm not currently mapping AT&T, based on CellMapper, it appears to be right on cell edge for both sites. Regardless, it appears that whoever is deploying is planning for a significant build. There are eight Crown Castle Solutions nodes approved for construction in a 12-block by 2-block area.
    • Starlink (1900mhz) for T-Mobile, AST SpaceMobile (700mhz and 850mhz) for AT&T, GlobalStar (unknown frequency) for Apple, Iridium (unknown frequency) for Samsung, and AST SpaceMobile (850mhz) for Verizon only work on frequency bands the carrier has licensed nationwide.  These systems broadcast and listen on multiple frequencies at the same time in areas much wider than normal cellular market license areas.  They would struggle with only broadcasting certain frequencies only in certain markets so instead they require a nationwide license.  With the antennas that are included on the satellites, they have range of cellular band frequencies they support and can have different frequencies with different providers in each supported country.  The cellular bands in use are typically 5mhz x 5mhz bands (37.5mbps total for the entire cell) or smaller so they do not have a lot of data bandwidth for the satellite band covering a very large plot of land with potentially millions of customers in a single large cellular satellite cell.  I have heard that each of Starlink's cells sharing that bandwidth will cover 75 or more miles. Satellite cellular connectivity will be set to the lowest priority connection just before SOS service on supported mobile devices and is made available nationwide in supported countries.  The mobile device rules pushed by the provider decide when and where the device is allowed to connect to the satellite service and what services can be provided over that connection.  The satellite has a weak receiving antenna and is moving very quickly so any significant obstructions above your mobile device antenna could cause it not to work.  All the cellular satellite services are starting with texting only and some of them like Apple's solution only support a predefined set of text messages.  Eventually it is expected that a limited number of simultaneous voice calls (VoLTE) will run on these per satellite cell.  Any spare data will then be available as an extremely slow LTE data connection as it could potentially be shared by millions of people.  Satellite data from the way these are currently configured will likely never work well enough to use unless you are in a very remote location.
    • T-Mobile owns the PCS G-block across the contiguous U.S. so they can just use that spectrum to broadcast direct to cell. Ideally your phone would only connect to it in areas where there isn't any terrestrial service available.
    • So how does this whole direct to satellite thing fit in with the way it works now? Carriers spend billions for licenses for specific areas. So now T-Mobile can offer service direct to customers without having a Terrestrial license first?
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...